Opens in a new tab

PIC16F1708T-E/SSVAO

8-bit PIC MCU, 7KB Flash, 256B EEPROM, 2 op-amps, 10-bit ADC, 32MHz, 20-SSOP, Microchip PIC16F1708

3200

Effective Inventory

Image for reference only

Manufacturer Part:

PIC16F1708T-E/SSVAO

Package:

20-SSOP (0.209″, 5.30mm Width), 7.17×5.41×1.60mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The PIC16F1708T-E/SSVAO is a low-cost, high-performance 8-bit microcontroller from Microchip Technology based on the enhanced mid-range PIC core architecture. Part of the PIC16F170x family, this device features 7KB of self-programmable Flash program memory, 256 bytes of EEPROM data memory, 512 bytes of RAM, and an integrated 10-bit ADC with up to 11 channels. It includes advanced analog peripherals including two op-amps (Op Amps), two comparators, programmable ramp generators, and a 5-bit digital-to-analog converter (DAC). Running at up to 32MHz internal oscillator with a 2.3V to 5.5V supply range, the PIC16F1708 is housed in a 20-pin SSOP package and is rated for -40°C to +125°C extended temperature operation, making it ideal for cost-sensitive analog-intensive applications.

Key Specifications

Parameter Value
Manufacturer Microchip Technology
Core Architecture Enhanced Mid-Range PIC, 8-bit
CPU Speed (max) 32 MHz (8 MIPS)
Program Memory 7KB (7K x 14) Flash
RAM Size 512 bytes
EEPROM Data Memory 256 bytes
Supply Voltage Range 2.3V to 5.5V
I/O Pins 18 GPIO
ADC 11-channel, 10-bit SAR, up to 200ksps
DAC 1-channel, 5-bit buffered
Operational Amplifiers 2 (Op Amp with rail-to-rail output)
Comparators 2
Programmable Ramp Generator Yes (PRG)
Timers TMR0 (8-bit), TMR1 (16-bit), TMR2 (8-bit)
PWM / CCP 2 x CCP (PWM, compare, capture)
Communications EUSART, SPI, I²C
Oscillator Internal HFINTOSC (16MHz max with 32MHz PLL)
Watchdog Timer Yes (WDT with dedicated internal oscillator)
Brown-Out Reset Yes (BOR with programmable levels)
Operating Temperature -40°C to +125°C (E grade)
Package 20-SSOP (0.209″, 5.30mm Width)
Packaging Tape & Reel, 2,500 pcs/reel

Features

  • Enhanced mid-range 8-bit PIC core, 32MHz max frequency
  • 7KB self-programmable Flash memory
  • 256 bytes EEPROM data storage
  • 512 bytes RAM
  • 11-channel 10-bit ADC with up to 200ksps conversion rate
  • Two integrated op-amps with rail-to-rail outputs
  • Two comparators with selectable reference inputs
  • 5-bit buffered DAC
  • Programmable ramp generator (PRG)
  • Capture/Compare/PWM (CCP) modules
  • EUSART, SPI, and I²C serial interfaces
  • Internal 16MHz oscillator with 32MHz PLL
  • Wide operating voltage: 2.3V to 5.5V
  • Brown-out reset and power-on reset
  • Watchdog timer with dedicated internal oscillator
  • Low power sleep and idle modes
  • 18 general-purpose I/O pins with interrupt-on-change
  • In-Circuit Serial Programming™ (ICSP) support
  • Temperature range: -40°C to +125°C

Applications

  • Analog sensor signal conditioning
  • Battery chargers and power supplies
  • LED lighting drivers and controls
  • Motor control and fan drives
  • Industrial sensors and transmitters
  • Consumer electronics and appliances
  • Automotive body and lighting control
  • Smart meter and energy monitoring
  • Portable medical devices
  • Low-cost embedded control systems
Product Introduction: PIC16F1708T-E/SSVAO Product Introduction

The PIC16F1708T-E/SSVAO from Microchip Technology is a feature-rich 8-bit microcontroller offering an exceptional level of analog integration in a small, cost-effective package. Building on the enhanced mid-range PIC architecture, this device delivers up to 8 MIPS of processing power at 32MHz operation while operating from a 2.3V to 5.5V supply. What sets the PIC16F1708 apart is its extensive analog peripheral set: two rail-to-rail operational amplifiers, two analog comparators, an 11-channel 10-bit ADC, a 5-bit buffered DAC, and a programmable ramp generator (PRG). This analog integration eliminates the need for external signal conditioning components in many applications, reducing BOM cost and board space. The device includes 7KB of self-programmable Flash memory with built-in charge pump for in-application programming, 256 bytes of EEPROM for non-volatile data storage, and 512 bytes of general-purpose RAM. Communication peripherals include EUSART (with auto-baud detect), SPI, and I²C, along with two CCP modules for PWM, capture, and compare functions. The internal oscillator supports frequencies up to 16MHz (32MHz with PLL), reducing or eliminating the need for external crystal components. With its extended -40°C to +125°C temperature rating and 20-pin SSOP package, the PIC16F1708 is well-suited for analog-intensive applications in industrial control, automotive body electronics, power supplies, LED lighting, and sensor signal conditioning.

Working Principle: PIC16F1708T-E/SSVAO Working Principle

The PIC16F1708 executes instructions using the enhanced mid-range PIC architecture, which features a 14-bit wide instruction memory and 8-level deep hardware stack. The CPU operates on a Harvard architecture with separate program and data buses, enabling instruction fetch and execution in a single clock cycle (pipelined). At 32MHz clock speed, the device executes 8 million instructions per second (MIPS). The internal oscillator module (HFINTOSC) provides factory-calibrated clock frequencies from 16MHz down to 31kHz, with an integrated 32MHz PLL for maximum performance. The two operational amplifiers can be configured as general-purpose op-amps, comparators with hysteresis, or as part of the programmable ramp generator circuit. The rail-to-rail output capability allows the op-amp output to swing close to both supply rails, maximizing dynamic range. The 10-bit ADC uses a successive approximation register (SAR) architecture and supports conversion rates up to 200ksps, with automatic acquisition control for ease of use. The CCP (Capture/Compare/PWM) modules can be used to measure pulse widths, generate periodic interrupts, or produce PWM waveforms for motor control and LED dimming applications. In-Circuit Serial Programming (ICSP) allows programming and debugging through two I/O pins without removing the device from the target board.

Pin Description: PIC16F1708T-E/SSVAO Pin Definition and Functions
Pin Name Type Description
1 VSS Power Ground (VSS)
2-5 RA0-RA3 I/O Port A I/O with ADC, comparator, DAC, reference functions
6 RA4 I/O Port A I/O / OSC1 / CLKIN
7 RA5 I/O Port A I/O / OSC2 / CLKOUT
8 RE3/Vpp I/O Port E I/O / MCLR / Vpp
9 VDD Power Positive supply voltage (2.3V to 5.5V)
10-17 RB0-RB7 I/O Port B I/O with interrupt-on-change, PWM, UART, SPI, I²C functions
18-20 RC0-RC2 I/O Port C I/O with CCP, comparator, op-amp functions
Application Scenarios: In which products and applications is PIC16F1708T-E/SSVAO used
  • Sensor Signal Conditioning: The integrated op-amps and ADC enable direct sensor signal amplification and digitization for temperature, pressure, and current sensing applications
  • Battery Chargers: Used in linear and switch-mode battery chargers for constant-current/constant-voltage control with the integrated op-amps and PWM modules
  • LED Lighting Control: Implements dimming control, color mixing, and current regulation in LED drivers using PWM and comparator modules
  • Motor Control: Provides PWM-based speed control for small DC motors, fans, and brushless motor commutation
  • Industrial Sensor Transmitters: Serves as the intelligence in 4-20mA current loop transmitters and industrial sensor interfaces
  • Power Supply Control: Implements digital control loops in DC-DC converters with the integrated analog peripherals
  • Automotive Body Electronics: Used in lighting control, seat position memory, and small motor control applications
  • Portable Medical Devices: Suitable for low-power portable medical instruments requiring analog signal processing and MCU control
Alternative Models: What chips are recommended as replacements for PIC16F1708T-E/SSVAO
Model Manufacturer Flash RAM ADC Package
PIC16F1704 Microchip 3.5KB 256B 8-ch 10-bit 14-pin SOIC
PIC16F1709 Microchip 14KB 1KB 12-ch 10-bit 28-pin SOIC
STM8S003F3 STMicro 8KB 1KB 5-ch 10-bit TSSOP-20
MC9S08SH8 NXP 8KB 512B 12-ch 10-bit 20-TSSOP
ATTINY817 Microchip 8KB 512B 11-ch 10-bit 20-SSOP

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1