Opens in a new tab

AD7607BSTZ

8-channel 14-bit simultaneous sampling ADC DAS, 200kSPS, bipolar ±10V/±5V, 64-LQFP, ADI AD7607BSTZ

3200

Effective Inventory

Image for reference only

Manufacturer Part:

AD7607BSTZ

Package:

64-LQFP (10mm × 10mm), surface mount

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The AD7607BSTZ is a 14-bit, 8-channel, simultaneous sampling analog-to-digital data acquisition system (DAS) from Analog Devices (ADI). Housed in a 64-lead LQFP package, this device features eight simultaneous sampling channels with 200 kSPS throughput per channel, supporting true bipolar input ranges of ±10 V and ±5 V from a single 5 V analog supply. The AD7607 integrates analog input clamp protection, input buffer amplifiers with 1 MΩ input impedance, a second-order anti-aliasing filter, a 14-bit charge-redistribution SAR ADC, a flexible digital filter, an on-chip 2.5 V precision reference and reference buffer, plus high-speed serial and parallel interfaces. The 7 kV ESD rating on analog inputs, low power consumption of 100 mW at 200 kSPS, and standby mode of 25 mW make it ideal for power-line monitoring, multi-phase motor control, instrumentation, and multi-axis positioning systems.

Key Specifications

Parameter Value
Manufacturer Analog Devices Inc. (ADI)
Part Number AD7607BSTZ
Product Type Data Acquisition System (DAS) / Simultaneous Sampling ADC
Resolution 14 bits
Number of Channels 8 (simultaneous sampling)
Sampling Rate 200 kSPS (all channels)
Input Range ±10 V, ±5 V (true bipolar)
Input Impedance 1 MΩ
SNR (Typical) 85.5 dB @ 50 kSPS
INL / DNL ±0.25 LSB / ±0.25 LSB
Analog Supply Voltage 4.75 V ~ 5.25 V (single 5V supply)
Digital Supply (VDRIVE) 2.3 V ~ 5.25 V
Power Consumption 100 mW typ @ 200 kSPS; 25 mW standby
Reference Internal 2.5 V (or external)
Interface SPI / QSPI / MICROWIRE / DSP / Parallel
Input Clamp Protection ±16.5 V (ESD: 7 kV on analog inputs)
Anti-Aliasing Filter On-chip, 2nd order, 22 kHz -3dB cutoff
Operating Temperature -40°C ~ +85°C
Package / Case 64-LQFP (10mm × 10mm)
Mounting Type Surface Mount
RoHS RoHS3 Compliant
MSL Level MSL 3 (168 hours)
Product Status Active / In Production

Features

  • 8-channel simultaneous sampling 14-bit SAR ADC DAS
  • True bipolar analog inputs: ±10V, ±5V ranges
  • Single 5V analog supply, 2.3V~5.25V VDRIVE
  • Fully integrated data acquisition solution
  • Analog input clamp protection (±16.5V, 7kV ESD)
  • 1 MΩ analog input impedance with input buffers
  • On-chip 2nd-order anti-aliasing analog filter
  • On-chip precision 2.5V reference and buffer
  • Flexible parallel / serial interface (SPI/QSPI/DSP)
  • Pin-compatible 14-bit to 18-bit family (AD7605/6/7/8/9)
  • SNR: 85.5 dB @ 50 kSPS
  • INL / DNL: ±0.25 LSB
  • Low power: 100 mW @ 200 kSPS
  • Standby mode: 25 mW typical
  • 64-lead LQFP package
  • RoHS3 compliant

Applications

  • Power line monitoring and protection systems
  • Multi-phase motor control and drives
  • Instrumentation and control systems
  • Multi-axis positioning and motion control
  • Data acquisition systems (DAS)
  • Industrial automation and PLC analog modules
  • Energy metering and power quality analysis
  • Test and measurement equipment
  • Process control and monitoring
  • Sensor data acquisition arrays
Product Introduction: AD7607BSTZ Product Introduction

The AD7607BSTZ is a 14-bit, 8-channel, simultaneous sampling data acquisition system (DAS) from Analog Devices, featuring a complete analog front-end with SAR ADC architecture. Fabricated in advanced CMOS process technology, this device integrates all necessary signal conditioning and data conversion circuitry into a single chip: analog input clamp protection circuits tolerant to ±16.5V overvoltage, high-input-impedance buffer amplifiers (1 MΩ), second-order anti-aliasing filters with 22 kHz cutoff, a 14-bit charge-redistribution successive approximation ADC, a flexible digital filter engine, and a precision 2.5V on-chip reference with buffer amplifier. The AD7607 accepts true bipolar input signals of ±10V and ±5V ranges while operating from a single 5V analog supply, eliminating the need for external dual-supply amplifiers and level translation. Its eight channels capture all input signals simultaneously at up to 200 kSPS per channel, preserving the phase relationship between channels — critical for three-phase power monitoring, multi-axis motion control, and synchronized sensor arrays. The device offers both high-speed parallel and serial (SPI/QSPI/MICROWIRE/DSP-compatible) interfaces for flexible system integration. The AD7607 is part of a pin-compatible family spanning 14-bit to 18-bit resolutions (AD7605 through AD7609), enabling easy performance upgrades without PCB redesign. With 7kV ESD protection on analog inputs, low 100mW power dissipation, and a compact 64-lead LQFP package, the AD7607BSTZ is the ideal choice for demanding industrial, instrumentation, and power system applications.

Working Principle: AD7607BSTZ Working Principle

The AD7607 operates as a simultaneous-sampling successive approximation register (SAR) analog-to-digital converter system. Simultaneous sampling means that all eight analog input channels are sampled at precisely the same instant, eliminating the time-skew errors that occur in sequential (multiplexed) ADC architectures. This is achieved using eight independent track-and-hold (T&H) amplifiers that all transition from track mode to hold mode on the same edge of the CONVST signal. Once the inputs are captured, each channel’s SAR ADC converts its held analog voltage into a 14-bit digital value through a charge-redistribution process. The SAR algorithm works by iteratively comparing the input voltage against a series of binary-weighted reference voltages generated by an internal capacitive DAC, determining each bit from MSB to LSB through successive comparisons. The AD7607 includes integrated input buffers with 1 MΩ impedance, reducing the drive requirement on the signal source compared to unbuffered ADC inputs. The second-order anti-aliasing filter removes frequency components above the Nyquist frequency before sampling, preventing aliasing of high-frequency noise into the signal band. An on-chip 2.5V buried zener reference provides the voltage reference for the SAR conversion, with an external reference option available for systems requiring higher precision or matched references across multiple devices. Digital filtering options (sinc1, sinc2, sinc3, and FIR) are configurable via pins or serial register settings, allowing the user to trade off throughput for noise performance. The conversion results can be read out via a parallel interface (byte or word mode) or a high-speed serial interface, with two serial data outputs (DOUTA and DOUTB) to support daisy-chaining multiple devices. The overall architecture delivers true simultaneous multi-channel sampling with high accuracy and low power in a compact form factor.

Pin Description: AD7607BSTZ Pin Definition and Functions

The AD7607BSTZ is available in a 64-lead LQFP package. Key pin functions are organized as follows:

Pin Group Pin Numbers Description
Analog Inputs 49,51,53,55,57,59,61,63 V1~V8 — 8 analog input channels
Input Grounds 50,52,54,56,58,60,62,64 V1GND~V8GND — corresponding analog grounds
Power Supplies 1, 12, 35, 38, 47, 48 AVCC (analog 5V), VDRIVE (digital I/O 2.3-5.25V)
Grounds 2, 13, 37, 40, 43/46, 42 AGND, DGND, REFGND
Reference 42, 34, 44/45 REFIN/REFOUT, REF SELECT, REFCAPA/REFCAPB
Parallel Data Bus 16-24, 27-33 DB0~DB15 — parallel data bus (bi-directional)
Serial Data Output 24 (DOUTA), 25 (DOUTB) Serial data outputs A and B
Control Signals 3-11, 14, 15, 25, 26 CONVSTA/B, CS, RD, SCLK, RANGE, OS0-2, etc.
Regulator Cap 36, 39 REGCAP — internal regulator decoupling

For complete pin descriptions, timing diagrams, and recommended operating conditions, refer to the official AD7607 datasheet.

Application Scenarios: In which products and applications is AD7607BSTZ used
  • Power Line Monitoring & Protection: Used in electricity meters, power quality analyzers, and relay protection equipment for simultaneous three-phase voltage and current sampling, enabling accurate power calculation, harmonic analysis, and fault detection
  • Multi-Phase Motor Control: Deployed in servo drives, BLDC/PMSM motor controllers, and variable frequency drives for simultaneous current and voltage sensing across all phases, supporting FOC and advanced control algorithms
  • Industrial Data Acquisition: Used in PLC analog input modules, distributed I/O systems, and SCADA front-ends for multi-channel industrial sensor signal acquisition with high accuracy and channel synchronization
  • Instrumentation & Test Equipment: Found in oscilloscopes, data loggers, and spectrum analyzers where multiple signals must be captured simultaneously for time-correlated analysis
  • Multi-Axis Motion Control: Used in CNC machines, robotics, and 3D printers for synchronized position/velocity feedback across multiple axes, enabling precise coordinated motion
  • Energy & Power Systems: Deployed in renewable energy inverters (solar, wind), UPS systems, and battery management for multi-point voltage and current monitoring
  • Medical Instrumentation: Used in patient monitoring equipment and diagnostic devices where multiple biosignals require synchronized sampling
  • Process Control & Automation: Found in process controllers for chemical, pharmaceutical, and food processing industries requiring synchronized multi-parameter monitoring
Alternative Models: What chips are recommended as replacements for AD7607BSTZ
Part Number Manufacturer Resolution Channels Sample Rate Key Difference
AD7607BSTZ ADI 14-bit 8 200kSPS Standard 14-bit 8-ch simultaneous
AD7606BSTZ ADI 16-bit 8 200kSPS Higher 16-bit resolution
AD7608BSTZ ADI 18-bit 8 200kSPS 18-bit resolution, pin compatible
AD7606-6 ADI 16-bit 6 200kSPS 6-channel version
ADS8588S Texas Instruments 16-bit 8 300kSPS TI alternative, higher speed
LTC2325-14 ADI/LTC 14-bit 8 1.6MSPS Much higher speed, smaller package

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1