Opens in a new tab

DSPIC33EV256GM104-I

5V 16-bit dsPIC DSC, 70MIPS, 256KB Flash, 16KB RAM, CAN, 44-TQFP, Microchip dsPIC33EV256GM104-I

3800

Effective Inventory

Image for reference only

Manufacturer Part:

DSPIC33EV256GM104-I

Package:

44-Lead TQFP (10mm × 10mm), surface mount

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The DSPIC33EV256GM104-I is a 5V-capable 16-bit digital signal controller from Microchip’s dsPIC33EV family, designed for motor control and digital power applications requiring high noise immunity and direct 5V operation. Housed in a 44-pin TQFP package, this device features a 70 MIPS dsPIC DSC core with integrated DSP engine, 256 KB of Flash program memory, 16 KB of RAM, 5V-tolerant I/Os, and advanced peripherals including high-resolution PWM with 2.1 ns resolution, 12-bit ADC with up to 3.5 Msps throughput, operational amplifiers, analog comparators, and a CAN 2.0B controller. The dsPIC33EV family operates from a 4.5V to 5.5V supply (compatible with 5V systems) while the core runs at 3.3V (internal regulator), offering superior noise immunity and direct interfacing to 5V sensors and actuators — critical for industrial and automotive environments. With AEC-Q100 qualification available on automotive variants, it is ideal for motor control, digital power, industrial automation, and automotive electronics.

Key Specifications

Parameter Value
Manufacturer Microchip Technology Inc.
Part Number DSPIC33EV256GM104-I/PT
Product Type 16-Bit Digital Signal Controller (DSC) – 5V
Core Architecture dsPIC DSC (modified Harvard, 16-bit)
CPU Speed 70 MIPS (140 MHz maximum)
Program Memory (Flash) 256 KB (128K x 24-bit instructions)
Data Memory (RAM) 16 KB
DMA Channels 4 channels
Operating Voltage (I/O) 4.5 V to 5.5 V (5V tolerant I/O)
Core Voltage 3.3 V (internal regulator from 5V supply)
Digital I/O Pins Up to 36 (44-pin package)
12-bit ADC Channels Up to 27 analog inputs, up to 3.5 Msps
ADC Architecture Successive Approximation (SAR), multiple cores
PWM Outputs Up to 8 PWM outputs (4 pairs), 2.1ns resolution
Motor Control PWM Yes (complementary pairs, dead-band, fault inputs)
Op Amps / Comparators Integrated op amps + analog comparators
CAN Controller 1 x CAN 2.0B (32 buffers)
UART / SPI / I2C 2 UART, 2 SPI, 1 I2C
Quadrature Encoder Interface Yes (QEI, 1 channel)
Input Capture / Output Compare 6 IC / 6 OC
Timers 5 x 16-bit (or 2 x 32-bit)
CRC Module Yes
Automotive Qualification AEC-Q100 Grade 0/1 (on ‘E’ suffix variants)
Operating Temperature -40°C ~ +85°C (I suffix, industrial)
Package / Case 44-Lead TQFP (10mm × 10mm)
Mounting Type Surface Mount
RoHS RoHS Compliant
Product Status Active / In Production

Features

  • High-performance 16-bit dsPIC DSC core, 70 MIPS
  • 5V operating voltage for high noise immunity
  • 5V tolerant I/O pins (direct 5V interfacing)
  • 256 KB Flash program memory, 16 KB RAM
  • 4-channel DMA controller
  • Integrated DSP engine (MAC, barrel shifter, bit reversal)
  • 40-bit accumulator with saturation/rounding
  • High-speed PWM: 8 outputs, 2.1ns resolution
  • Motor control PWM with dead-band and fault protection
  • 12-bit SAR ADC (up to 3.5 Msps, 27 channels)
  • Multiple ADC cores for simultaneous sampling
  • Integrated operational amplifiers (2-3 op amps)
  • Analog comparators with programmable DAC references
  • CAN 2.0B controller (32 message buffers)
  • 2 UART, 2 SPI, 1 I2C
  • Quadrature encoder interface (QEI)
  • 6 input capture / 6 output compare modules
  • CRC hardware acceleration
  • On-chip 3.3V regulator from 5V input
  • Brown-out reset, power-on reset, WDT
  • Industrial temperature range: -40°C ~ +85°C
  • AEC-Q100 automotive variants available
  • 44-pin TQFP package
  • RoHS compliant

Applications

  • Brushless DC (BLDC) motor control
  • PMSM and ACIM motor drives with FOC
  • Digital power supplies and SMPS
  • Power factor correction (PFC)
  • Automotive electronics (5V systems)
  • Industrial automation and drives
  • Consumer appliances (white goods)
  • Power tools and garden equipment
  • CAN-based control networks
  • High noise immunity embedded control
Product Introduction: DSPIC33EV256GM104-I Product Introduction

The DSPIC33EV256GM104-I is a 5V-tolerant 16-bit digital signal controller from Microchip’s dsPIC33EV family, specifically designed for motor control and digital power applications that operate in noisy industrial and automotive environments. A distinguishing feature of the dsPIC33EV family is its ability to operate from a 5V power supply with 5V-tolerant I/Os, providing superior noise immunity compared to 3.3V-only devices and enabling direct interfacing with 5V sensors, actuators, and legacy systems without the need for level shifters. The device core runs at 3.3V, generated by an on-chip linear regulator from the 5V supply, achieving 70 MIPS performance while the I/O pins are 5V capable. Built around the dsPIC modified Harvard architecture with a 24-bit instruction word, the core integrates a full DSP engine supporting single-cycle 16×16 multiply-accumulate operations, a 40-bit accumulator with saturation, barrel shifting, and bit-reversed addressing for efficient FFT computation. The device includes 256 KB of on-chip Flash program memory and 16 KB of data RAM, supported by a 4-channel DMA controller for autonomous data transfer between peripherals and memory. The motor control and power peripherals are a key strength: up to 8 high-resolution PWM outputs (4 complementary pairs) with 2.1 nanosecond resolution, integrated dead-band generation, and fault input pins for fast over-current protection; a 12-bit SAR ADC with up to 3.5 Msps throughput supporting up to 27 analog input channels with simultaneous sampling capability; and integrated operational amplifiers and analog comparators that eliminate external signal conditioning components in current sensing and protection circuits. Communication peripherals include a CAN 2.0B controller with 32 message buffers, two UARTs, two SPI ports, and one I2C port. A quadrature encoder interface provides direct connection to incremental position encoders for closed-loop motor control. With industrial temperature range (-40°C to +85°C), AEC-Q100 automotive qualification available on selected variants, and a compact 44-pin TQFP package, the DSPIC33EV256GM104-I is an excellent choice for cost-sensitive motor control, digital power, and automotive applications requiring high noise immunity and 5V operation.

Working Principle: DSPIC33EV256GM104-I Working Principle

The DSPIC33EV256GM104-I operates as a 5V-tolerant digital signal controller using a dual-voltage architecture: the I/O pins interface at 5V levels for high noise immunity, while the core logic runs at 3.3V generated by an internal regulator from the 5V supply. The dsPIC CPU core is a 16-bit modified Harvard architecture where instructions (24 bits wide) are fetched from Flash memory while data (16 bits wide) is accessed from RAM, allowing both operations to occur in parallel for maximum throughput. The integrated DSP engine provides hardware acceleration for signal processing operations: a single-cycle 17×17-bit multiplier supports both fractional and integer multiplication, accumulating results into a 40-bit accumulator that can be configured for either saturation or wrap-around behavior. Two accumulator registers are available for back-to-back MAC operations common in digital filter algorithms. The barrel shifter provides efficient multi-bit shifts in a single cycle, and dedicated bit-reversed addressing mode simplifies the index calculation for FFT butterfly operations. The PWM module generates high-resolution pulse-width modulated signals using dedicated hardware timers and comparators that operate independently of the CPU, ensuring minimal jitter and precise timing — essential for high-efficiency motor control and high-frequency power conversion. The complementary PWM outputs support programmable dead-band insertion to prevent shoot-through currents in half-bridge and full-bridge circuits. Fault input pins provide hardware-level over-current protection that can disable PWM outputs within nanoseconds, without CPU intervention. The multi-channel ADC uses successive approximation architecture with multiple SAR cores, enabling simultaneous sampling of multiple analog inputs — critical for multi-phase motor control where phase currents and DC bus voltage must be captured at the same moment. Integrated op amps can be configured as differential amplifiers for current shunt sensing or as general-purpose signal conditioning circuits, while the analog comparators with internal DAC references provide fast over-current and over-voltage detection. The DMA controller transfers data between peripherals and memory in the background, allowing the CPU to focus on algorithm computation. The 5V I/O capability is achieved through specialized I/O buffer circuits that can tolerate higher voltages while the core operates at 3.3V, providing the noise immunity benefits of 5V logic with the power efficiency of a 3.3V core.

Pin Description: DSPIC33EV256GM104-I Pin Definition and Functions

The DSPIC33EV256GM104-I is available in a 44-lead TQFP package. Major pin groups:

Pin Group Count Description
Power & Ground 6 VDD (5V), VSS, AVDD, AVSS, VREG
Oscillator 2 OSC1/CLKI, OSC2/CLKO
Digital I/O Ports Up to 36 Ports RA, RB, RC, RD, RE (5V tolerant)
Analog Inputs Up to 27 AN0-AN26 (shared with digital pins)
PWM Outputs 8 PWM1H/PWM1L through PWM4H/PWM4L
Fault Inputs 2-4 FLT1, FLT2 (PWM fault protection)
CAN Bus 2 C1RX, C1TX (CAN 2.0B)
UART 4 2 UART ports (RX/TX each)
SPI ~6 2 SPI modules (SCK, SDI, SDO, SS)
I2C 2 1 I2C module (SDA, SCL)
QEI / Encoder 3 QEA, QEB, IND (1 channel)
Op Amps / Comparators ~6 Op amp inputs/outputs, comparator inputs
Debug/Program 3 PGEC1, PGED1, MCLR

Note: Many pins have multiple multiplexed functions. The exact pinout depends on the specific package variant and pin configuration settings. Refer to the official dsPIC33EV256GM104 datasheet for complete pin assignments and electrical characteristics.

Application Scenarios: In which products and applications is DSPIC33EV256GM104-I used
  • BLDC / PMSM Motor Control: Used in brushless DC and permanent magnet synchronous motor drives for power tools, garden equipment, e-bikes, and small industrial motors, implementing sensored or sensorless FOC algorithms
  • Digital Power Supplies & SMPS: Deployed in high-efficiency switch-mode power supplies, DC-DC converters, and battery chargers, using the high-resolution PWM and DSP engine for digital control loop implementation
  • Power Factor Correction (PFC): Used in active PFC circuits for power supplies, LED drivers, and motor drives where the DSP core runs PFC control algorithms to achieve high power factor and low THD
  • Automotive Electronics (5V Systems): Used in automotive body electronics, auxiliary motor drives (fans, pumps, wipers), and sensor interfaces in 5V automotive electrical systems, with AEC-Q100 qualified variants available
  • Industrial Automation & Drives: Found in small variable frequency drives, conveyor controllers, and industrial actuator drives requiring 5V I/O tolerance for direct connection to industrial sensors and 5V logic
  • Consumer Appliances (White Goods): Used in washing machines, refrigerators, air conditioners, and other major appliances for high-efficiency compressor and motor control with high noise immunity
  • Power Tools & Garden Equipment: Deployed in cordless drills, saws, blowers, and trimmers for BLDC motor control with robust EMC performance and 5V battery operation
  • CAN-Based Control Networks: Serves as a CAN node in industrial and automotive distributed control systems, combining CAN 2.0B communication with motor control or sensor processing in a single chip
Alternative Models: What chips are recommended as replacements for DSPIC33EV256GM104-I
Part Number Manufacturer Flash RAM Voltage Package
DSPIC33EV256GM104-I Microchip 256KB 16KB 4.5-5.5V 44-TQFP
DSPIC33EV64GM104-I Microchip 64KB 8KB 4.5-5.5V 44-TQFP
DSPIC33EV256GM106-I Microchip 256KB 16KB 4.5-5.5V 64-TQFP
DSPIC33EP256MC506-I Microchip 256KB 24KB 3.0-3.6V 64-TQFP
STM32G474 ST 128KB 128KB 2.0-3.6V 48-LQFP
TMS320F280049 TI 256KB 100KB 3.3V 56-TSSOP

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1