Opens in a new tab

PIC16F1782-I

Analog-rich 28-pin MCU, 14KB Flash, 3 op-amps w/ PGA, 12-bit ADC, 3 comparators, 4 CLC, 32MHz

3100

Effective Inventory

Image for reference only

Manufacturer Part:

PIC16F1782-I

Package:

SOIC-28 / SSOP-28 / QFN-28 (4 x 4 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The PIC16F1782-I is a 28-pin high-performance 8-bit Flash microcontroller from Microchip’s PIC16F17xx series, featuring an exceptionally rich set of analog peripherals including a 12-bit ADC, 8-bit DAC, programmable gain amplifiers (PGA), multiple op-amps, and high-speed comparators. With 14 KB of Flash program memory, 1 KB of RAM, 256 bytes of EEPROM, and Configurable Logic Cells (CLC), this device is designed for sophisticated analog signal processing and control applications in industrial, medical, and power management systems. The industrial temperature variant operates from -40°C to +85°C.

Key Specifications

Core Architecture PIC RISC (enhanced mid-range, 14-bit)
Flash Program Memory 14 KB (8192 words)
RAM (Data Memory) 1024 bytes (1 KB)
EEPROM 256 bytes
ADC Resolution 12-bit, up to 18 channels
DAC 8-bit buffered
Operational Amplifiers 3 (with PGA modes)
Comparators 3 high-speed
Internal Oscillator 32 MHz (±1% calibrated)
Supply Voltage 2.3V to 5.5V
I/O Pins Up to 25
Serial Ports EUSART + MSSP (SPI/I²C)
CLC Modules 4 Configurable Logic Cells
Operating Temperature -40°C to +85°C (Industrial)
Package Type SOIC-28 / SSOP-28 / QFN-28

Features

  • 3 op-amps with programmable gain (1x to 16x)
  • 12-bit ADC (18 channels) + 8-bit DAC
  • 3 high-speed comparators with hysteresis
  • 14KB Flash + 1KB RAM + 256B EEPROM
  • 4 Configurable Logic Cells (CLC)
  • 32 MHz high-accuracy internal oscillator
  • EUSART + SPI + I²C serial ports
  • PWM modules with complementary outputs
  • Zero-Cross Detect (ZCD) module

Applications

  • Industrial sensor signal conditioning
  • Power supply control and monitoring
  • Motor control with current sensing
  • Medical instrumentation
  • Energy metering and power monitoring
  • Audio processing and filtering
  • Programmable analog front-ends
  • Battery management systems
Product Introduction: PIC16F1782-I Product Introduction

The PIC16F1782-I is a 28-pin member of Microchip’s PIC16F17xx family of highly integrated 8-bit microcontrollers with an exceptionally rich analog peripheral set, positioning it as a true ‘mixed-signal system on a chip’ for advanced analog applications. Featuring three operational amplifiers with programmable gain (up to 16x), three high-speed comparators, an 18-channel 12-bit ADC, an 8-bit DAC, and a zero-cross detection module, this device can implement complete analog signal chains—amplification, filtering, comparison, and digitization—without requiring external analog components. The 14 KB of Flash program memory and 1 KB of RAM provide generous resources for implementing digital filtering, calibration algorithms, and control logic alongside communication protocol stacks. The four Configurable Logic Cells (CLC) enable implementation of custom hardware logic functions—including PWM generation, event combining, and signal conditioning—without CPU intervention, enabling very fast response to analog events. The 32 MHz internal oscillator delivers 8 MIPS of processing performance with factory-calibrated accuracy. The PIC16F1782 is particularly well-suited for power supply control, motor drive, energy metering, and industrial sensor applications where high analog integration and real-time control performance are required. The industrial temperature rating ensures reliable operation across a wide range of environmental conditions.

Working Principle: PIC16F1782-I Working Principle

The PIC16F1782-I uses Microchip’s enhanced mid-range PIC architecture with a 14-bit instruction set and 16-level hardware stack, delivering 8 MIPS at 32 MHz clock frequency. The three operational amplifiers are the centerpiece of the analog subsystem, each featuring a built-in programmable gain amplifier (PGA) with selectable gains of 1x, 2x, 4x, 8x, and 16x (in non-inverting configuration), enabling amplification of small sensor signals before digitization. The op-amps can be configured in various topologies including non-inverting amplifier, inverting amplifier, differential amplifier, and comparator modes, with internal resistor networks eliminating the need for external components. The 12-bit ADC features up to 18 analog input channels with automatic acquisition control and hardware averaging. The three high-speed comparators have programmable hysteresis and can generate interrupts or trigger CLC/PWM actions in hardware, enabling very fast response to analog threshold events. The four CLC modules can implement a variety of combinational and sequential logic functions, with inputs selectable from I/O pins, peripheral outputs, and internal signals. The PWM modules support complementary output pairs with dead-band control, essential for half-bridge and full-bridge motor drive and power supply topologies. The Zero-Cross Detection (ZCD) module monitors the AC line voltage zero-crossing point for TRIAC control and power line communication applications. The EUSART and MSSP serial ports support UART, SPI, and I²C communication protocols.

Pin Description: PIC16F1782-I Pin Definition and Functions
Port Count Type Key Peripheral Functions
PORTA 8 I/O ADC CH0-CH7, OPA1/OPA2, DAC output, MCLR, OSC
PORTB 8 I/O ADC CH8-CH14, SSP (SPI/I2C), IOC interrupts, CLC
PORTC 8 I/O ADC CH15-CH21, EUSART, PWM/CCP, OPA3, comparators, ZCD
VDD/VSS 2+ Power Power supply and ground connections
Application Scenarios: In which products and applications is PIC16F1782-I used
  • High-precision industrial sensor transmitters with analog front-end
  • Switch-mode power supply controllers with monitoring and protection
  • BLDC motor drives with current sensing and speed control loops
  • Portable medical diagnostic equipment and patient monitors
  • Single-phase energy metering and power quality monitoring
  • Programmable analog front-ends for multi-sensor systems
Alternative Models: What chips are recommended as replacements for PIC16F1782-I
Manufacturer Part Number Package Notes
Microchip PIC16F1789 LQFP-44 28KB Flash, 4KB RAM, 4 op-amps, more I/O
Silicon Labs EFM8UB3 QFN-24 8051, 40MHz, 16KB Flash, 12-bit ADC
TI MSP430FR5969 TSSOP-28 FRAM, 16-bit, 48KB FRAM, 12-bit ADC, ultra low power
STMicro STM32G030 TSSOP-20 Cortex-M0+, 32KB Flash, 12-bit ADC, 32-bit

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1