Product Overview
The PIC16F18877-I is a high-performance 40/44-pin 8-bit Flash microcontroller from Microchip’s PIC16F188xx series, featuring the next-generation enhanced mid-range core with advanced analog peripherals, multiple serial communication ports, and extensive I/O capability. With 128 KB of Flash program memory, 4 KB of RAM, 1024 bytes of EEPROM, a 12-bit ADC with up to 33 channels, 5-bit DAC, op-amps, and an LCD driver, this device represents the pinnacle of 8-bit PIC integration for complex embedded applications. The industrial temperature variant operates from -40°C to +85°C.
Key Specifications
| Core Architecture | PIC RISC (enhanced mid-range, 14-bit) |
| Flash Program Memory | 128 KB (65536 words) |
| RAM (Data Memory) | 4096 bytes (4 KB) |
| EEPROM | 1024 bytes (1 KB) |
| ADC Resolution | 12-bit, up to 33 channels |
| DAC | 5-bit buffered |
| Operational Amplifiers | 2 (with PGA modes) |
| Comparators | 3 high-speed |
| LCD Controller | Up to 48 segments (24 common x 96 segment) |
| Internal Oscillator | 32 MHz HF + 31 kHz LF |
| Supply Voltage | 2.3V to 5.5V |
| I/O Pins | Up to 36 |
| Serial Ports | 4x UART + 2x SPI + 2x I²C |
| PWM Channels | 6 PWM + 2 ECCP |
| Operating Temperature | -40°C to +85°C (Industrial) |
| Package Type | PDIP-40 / TQFP-44 / UQFN-40 |
Features
- 128 KB Flash + 4 KB RAM + 1 KB EEPROM
- 12-bit ADC with 33 channels + 2 op-amps
- 4 UARTs + 2 SPIs + 2 I²Cs (rich serial)
- 6 PWM + 2 ECCP channels
- 3 comparators + 5-bit DAC
- Industrial control panels with LCD
- Home appliance controllers
- Smart meter and energy management
- Building automation systems
- Medical devices with display
- Motor control systems
- IoT gateway devices
- Industrial control and HMI panels with segment LCD displays
- Smart home appliance main controllers with display and touch
- Smart electricity/water/gas meter data concentrators
- Building automation controllers with multiple communication ports
- Medical patient monitors with LCD display and sensor I/O
- Multi-channel motor and actuator control systems
Applications
Product Introduction: PIC16F18877-I Product Introduction
The PIC16F18877-I is a flagship 40/44-pin 8-bit Flash microcontroller from Microchip’s PIC16F188xx family, offering the highest level of integration and memory capacity in the enhanced mid-range PIC16 lineup. With an impressive 128 KB of Flash program memory, 4 KB of RAM, and 1 KB of EEPROM, this device provides abundant resources for complex application firmware including sophisticated control algorithms, communication protocol stacks, graphical LCD driving, and data logging. The analog subsystem features a 12-bit ADC with up to 33 analog input channels—an extraordinary number for an 8-bit MCU—plus two operational amplifiers with programmable gain, three high-speed comparators, and a 5-bit DAC, enabling comprehensive analog signal processing without external components. The integrated LCD controller can drive up to 48-segment LCD displays (up to 24 commons and 96 segments depending on configuration), eliminating the need for external LCD driver ICs in display-equipped products. The exceptionally rich serial communication portfolio includes four UARTs, two SPI ports, and two I²C ports, enabling multi-protocol connectivity for gateway and data concentrator applications. With 36 general-purpose I/O pins, six PWM channels, multiple timer/counters, and an industrial temperature rating, the PIC16F18877 is the ultimate 8-bit PIC solution for complex, feature-rich embedded control designs.
Working Principle: PIC16F18877-I Working Principle
The PIC16F18877-I is built on Microchip’s enhanced mid-range PIC architecture with a 14-bit instruction set and a 16-level deep hardware stack. At 32 MHz system clock (from the high-frequency internal oscillator), the device delivers 8 MIPS of processing performance. The 128 KB Flash program memory is organized as 65536 14-bit words, accessible through a program counter with paging registers. The memory partition feature (Memory Access Partition – MAP) allows the Flash to be divided into boot block and application areas for secure field upgrades via bootloader. The 12-bit ADC with 33 channels features a successive approximation architecture with automated acquisition control, hardware averaging, and multiple trigger sources for flexible, low-overhead sampling. The two integrated op-amps support PGA gain settings up to 16x for sensor signal conditioning. The LCD controller module generates the multiplexed waveforms for driving static or multiplexed LCD displays, with programmable bias levels and frame rates. The four EUSART modules each support full-duplex UART communication with features like auto-baud detection, LIN support, and wake-on-break. The two MSSP modules provide SPI and I²C serial interface functionality. The six PWM modules and two ECCP (Enhanced CCP) modules support a wide range of waveform generation including complementary PWM with dead-band control for motor drive and power supply applications. Multiple low-power modes (Sleep, Doze, Idle) enable power management for energy-sensitive applications.
Pin Description: PIC16F18877-I Pin Definition and Functions
| Port | Count | Type | Key Peripheral Functions |
|---|---|---|---|
| PORTA (RA0-RA7) | 8 | I/O | ADC CH0-CH7, OPA1/OPA2, DAC, OSC, MCLR, LCD |
| PORTB (RB0-RB7) | 8 | I/O | ADC CH8-CH15, IOC interrupts, SSP1, UART1, CCP, LCD |
| PORTC (RC0-RC7) | 8 | I/O | ADC CH16-CH22, UART2, SSP2, ECCP, comparators, LCD |
| PORTD (RD0-RD7) | 8 | I/O | ADC CH23-CH28, parallel port, UART3/4, LCD segments |
| PORTE (RE0-RE3) | 4 | I/O | ADC CH29-CH32, parallel control, LCD commons |
| VDD/VSS | 2+ | Power | Power supply and ground (multiple pins) |
Application Scenarios: In which products and applications is PIC16F18877-I used
Alternative Models: What chips are recommended as replacements for PIC16F18877-I
| Manufacturer | Part Number | Package | Notes |
|---|---|---|---|
| Microchip | PIC16F19197 | TQFP-44 | 56KB Flash, LCD + ADC + op-amps, low power |
| STMicro | STM8L152C6 | LQFP-48 | STM8, 32KB Flash, LCD, 12-bit ADC, low power |
| Silicon Labs | EFM8UB3 | QFN-32 | 8051, 40MHz, 16KB Flash, USB, 12-bit ADC |
| TI | MSP430FR6972 | LQFP-48 | FRAM, 16-bit, 128KB FRAM, LCD, ultra low power |
Recommend Parts

RK73B2ATTD100J
10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200
Brand: KOA Speer
Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm
IN STOCK: 26435pcs
Cargo cycle: 3-7 Days
The minimum order is 1

TPS77001DBVR
50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5
Brand: TI
Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)
IN STOCK: 5000pcs
Cargo cycle: 3-7 Days
The minimum order is 1

TPL5010DDCR
Nano-power watchdog timer with power good, SOT-23-6
Brand: TI
Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)
IN STOCK: 12122pcs
Cargo cycle: 3-7 Days
The minimum order is 1

S1MB-13-F
1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C
Brand: Diodes Inc
Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)
IN STOCK: 3679pcs
Cargo cycle: 3-7 Days
The minimum order is 1

AD9912ABCPZ
1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64
Brand: ADI
Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)
IN STOCK: 3719pcs
Cargo cycle: 3-7 Days
The minimum order is 1








