Opens in a new tab

SI8641AB-B-IS1R

Quad-ch digital isolator, 3750Vrms, 150Mbps, 50kV/µs CMTI, 3/1 config, AEC-Q100, SOIC-16 NB

3800

Effective Inventory

Image for reference only

Manufacturer Part:

SI8641AB-B-IS1R

Package:

SOIC-16 Narrow Body (9.9 x 3.9mm, 1.27mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SI8641AB-B-IS1R is a quad-channel digital isolator from Skyworks Solutions (formerly Silicon Labs), providing 3750Vrms isolation with capacitive coupling technology. Configured with three forward and one reverse channel (3/1), it supports data rates up to 150Mbps with 50kV/µs CMTI and 13ns propagation delay. The device operates from 2.5V to 5.5V on both sides, housed in a narrow-body SOIC-16 package, and is AEC-Q100 qualified for automotive applications.

Key Specifications

Manufacturer Skyworks Solutions (Silicon Labs)
Number of Channels 4 (3 forward / 1 reverse)
Isolation Voltage 3750Vrms
Data Rate Up to 150Mbps
Supply Voltage Range 2.5V to 5.5V (both sides)
Propagation Delay 13ns typical
CMTI (Min) 50kV/µs
Pulse Width Distortion 4.5ns max
Default Output State Low (B suffix)
Channel Type Unidirectional
Operating Temperature -40°C to +125°C
Qualification AEC-Q100
Package SOIC-16 Narrow Body (7.5mm width)
Budgetary Price $2.69 @ 2.5ku

Features

  • 3750Vrms isolation with capacitive coupling barrier
  • 150Mbps maximum data rate
  • 50kV/µs minimum common-mode transient immunity
  • Low 13ns typical propagation delay
  • 2.5V to 5.5V dual-supply operation with level translation
  • AEC-Q100 qualified for automotive applications
  • Default-low output for fail-safe operation
  • Ultra-low power consumption
  • Narrow-body SOIC-16 package for space-efficient design
  • High electromagnetic immunity and low emissions

Applications

  • Automotive CAN and LIN bus isolation
  • Industrial communication isolation (SPI, UART, RS-485)
  • Motor drive and inverter control interfaces
  • Battery management system isolation
  • Medical device isolation
Product Introduction: SI8641AB-B-IS1R Product Introduction

The SI8641AB-B-IS1R is a quad-channel digital isolator from Skyworks Solutions’ Si864x family, providing 3750Vrms isolation using capacitive coupling technology with a silicon-dioxide (SiO2) insulation barrier. The device features three forward and one reverse channel (3/1 configuration) with a default-low output state (B suffix), critical for fail-safe system design. Supporting data rates up to 150Mbps with only 13ns typical propagation delay and 50kV/µs CMTI, it is well-suited for high-speed digital communication across isolation boundaries. The wide supply range of 2.5V to 5.5V on both sides enables voltage-level translation across the barrier. AEC-Q100 qualified, the device is designed for automotive and industrial applications requiring robust isolation in a compact narrow-body SOIC-16 package.

Working Principle: SI8641AB-B-IS1R Working Principle

Capacitive Isolation

The Si8641 uses on-chip high-voltage capacitors as the isolation barrier. Input signals are modulated into RF carrier waveforms, transmitted across the capacitive barrier, and demodulated on the receiving side. The differential signaling architecture provides high common-mode noise rejection, enabling the 50kV/µs CMTI specification. Compared to optocouplers, capacitive isolation offers faster speed, lower power, and longer device lifetime without LED degradation.

Differential Signal Transmission

Each channel uses a pair of on-chip capacitors for differential signal transmission. The modulator encodes the input logic state into complementary RF signals that pass through the capacitor pair. On the receive side, the differential signal is demodulated and restored to the original logic level. The differential architecture inherently rejects common-mode noise that appears equally on both capacitors.

Default Output State

The B suffix variant implements a default-low output state. If the input side loses power or the input signal is absent, the output defaults to logic low. This is essential for fail-safe designs where an uncontrolled high output could trigger unintended operation, such as in motor drive or power converter control interfaces.

Level Translation

The independent VDDI and VDDO supply rails allow different voltage levels on each side of the isolation barrier. The input logic thresholds are referenced to VDDI and the output logic levels are referenced to VDDO, enabling seamless translation between 2.5V, 3.3V, and 5V logic domains.

Pin Description: SI8641AB-B-IS1R Pin Definition and Functions
Pin Name Type Function
1 VDDI Power Input side supply (2.5V to 5.5V)
2 INA Input Channel A input (forward)
3 INB Input Channel B input (forward)
4 INC Input Channel C input (forward)
5 OUTD Output Channel D output (reverse, input side)
6 GNDI Ground Input side ground
7 ENI Input Input side enable (active high)
8 NC — No connect
9 NC — No connect
10 ENO Input Output side enable (active high)
11 GND2 Ground Output side ground
12 IND Input Channel D input (reverse, output side)
13 OUTC Output Channel C output (forward, output side)
14 OUTB Output Channel B output (forward, output side)
15 OUTA Output Channel A output (forward, output side)
16 VDDO Power Output side supply (2.5V to 5.5V)
Application Scenarios: In which products and applications is SI8641AB-B-IS1R used
  • Automotive CAN bus and motor control isolation requiring AEC-Q100 qualification with fail-safe default-low output
  • Industrial SPI and UART communication isolation needing 150Mbps throughput and 50kV/µs CMTI
  • Battery management systems where 3750Vrms isolation separates high-voltage battery packs from low-voltage controllers
  • Motor drive gate driver interfaces where default-low output prevents accidental gate turn-on during power-up
  • Medical device data communication isolation where compact narrow-body SOIC-16 saves board space
Alternative Models: What chips are recommended as replacements for SI8641AB-B-IS1R
Manufacturer Part Number Package Notes
Skyworks SI8641BC-B-IS1 SOIC-16 NB Same function, tube packaging
Skyworks SI8641BB-B-IS1R SOIC-16 NB Wide-body variant for higher creepage
TI ISO7841FDWR SOIC-16 WB 5.7kVrms, 100kV/µs CMTI, reinforced, higher isolation
ADI ADuM141E0BRWZ SOIC-16 WB iCoupler, 3.75kVrms, 150Mbps, magnetic coupling
Skyworks SI8640AB-B-IS1R SOIC-16 NB 4/0 all-forward channel variant

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NCP302045MNTWG

45V 5A programmable overcurrent protection switch, 50mΩ Ron, -60V reverse polarity, DFN-8

Brand: ON

Package: DFN-8 (3x3mm, 0.65mm pitch)

IN STOCK: 4759pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1