Opens in a new tab

Home » Integrated Circuits ICs, Interface ICs » LAN8710A-EZC-ABC

LAN8710A-EZC-ABC

10/100 Ethernet PHY transceiver with MII/RMII interface, flexPWR technology, HP Auto-MDIX, 32-QFN package

8742

Effective Inventory

Image for reference only

Manufacturer Part:

LAN8710A-EZC-ABC

Package:

32-VFQFN Exposed Pad (5 x 5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LAN8710A-EZC-ABC from Microchip Technology is a small-footprint, low-power 10/100 Ethernet Physical Layer (PHY) transceiver with flexPWR technology. It supports MII and RMII interfaces, HP Auto-MDIX, and variable I/O voltage from 1.6V to 3.6V, making it ideal for embedded networking applications.

Key Specifications

Manufacturer Microchip Technology
Interface MII, RMII, SMI
Data Rate 10/100 Mbps
Supply Voltage 1.6V ~ 3.6V
Duplex Full / Half
Package 32-VFQFN Exposed Pad (5x5mm)
Operating Temperature 0°C ~ 85°C
Standards IEEE 802.3 / 802.3u

Features

  • Single-chip 10/100 Ethernet PHY transceiver
  • flexPWR technology with variable I/O voltage (1.6V to 3.6V)
  • Integrated 1.2V regulator with disable feature
  • HP Auto-MDIX support for direct or crossover cables
  • Auto-negotiation for speed and duplex selection
  • Supports low-cost 25MHz crystal to reduce BOM
  • Two status LED outputs
  • Various low power modes including power-down and wake-on-LAN

Applications

  • Set-top boxes and digital TVs
  • Industrial embedded systems and LAN on motherboard
  • Cable/DSL modems and routers
  • IP phones and video phones
  • Networked printers and servers
  • POE applications
Product Introduction: LAN8710A-EZC-ABC Product Introduction

The Microchip LAN8710A-EZC-ABC is a low-power, small-footprint 10/100 Ethernet Physical Layer (PHY) transceiver compliant with IEEE 802.3-2005 standards. It supports communication with an Ethernet MAC via standard MII or RMII interfaces and features flexPWR technology that allows variable I/O voltage from 1.6V to 3.6V, enabling flexible power management. The integrated 1.2V regulator with disable capability further reduces power consumption. HP Auto-MDIX support eliminates the need for crossover cables, simplifying network connectivity. The device is packaged in a space-saving 32-pin QFN (5x5mm) package, making it ideal for embedded systems where board space is limited.

Working Principle: LAN8710A-EZC-ABC Working Principle

The LAN8710A operates as a physical layer transceiver bridging the MAC layer and the physical Ethernet medium. 1) PHY Core: The transceiver core handles 10BASE-T and 100BASE-TX encoding/decoding, including 4B/5B and MLT-3 encoding for 100Mbps operation, and Manchester encoding for 10Mbps. 2) Auto-Negotiation: Automatically determines the best possible speed (10 or 100Mbps) and duplex mode (half or full) with the link partner. 3) HP Auto-MDIX: Detects and corrects TX/RX pair swaps, allowing use of either straight-through or crossover cables. 4) flexPWR Architecture: The variable I/O voltage domain (1.6V to 3.6V) allows direct interfacing with different logic levels without level shifters, while the integrated 1.2V regulator powers the internal core logic.

Pin Description: LAN8710A-EZC-ABC Pin Definition and Functions
Pin Name Type Function
1 VDDCR Power Core/Regulator output (1.2V)
2 TXP Analog Positive transmit pair
3 TXN Analog Negative transmit pair
4 RXP Analog Positive receive pair
5 RXN Analog Negative receive pair
6 VDDRX Power Receive power supply
7-12 RMII/MII Digital I/O RMII/MII data and control signals
13 MDC Input Management data clock (SMI)
14 MDIO I/O Management data I/O (SMI)
15-16 LED0/LED1 Output Status LED outputs
17 INT Output Interrupt output
18-20 CONFIG Input Configuration strapping pins
21-26 RMII/MII Digital I/O RMII/MII data and control signals
27 XTAL1 Input Crystal input / external clock
28 XTAL2 Output Crystal output
29 RBIAS Analog Bias resistor connection
30 VDDA1P2 Power Analog 1.2V supply
31 VDDA3P3 Power Analog 3.3V supply
32 VDDIO Power I/O power supply (1.6V-3.6V)
Application Scenarios: In which products and applications is LAN8710A-EZC-ABC used
  • Set-top boxes and digital media adapters requiring Ethernet connectivity
  • Industrial embedded systems with LAN on motherboard designs
  • Cable/DSL modems and residential gateways
  • IP phones, video phones, and VoIP equipment
  • POE-powered devices and wireless access points
Alternative Models: What chips are recommended as replacements for LAN8710A-EZC-ABC
Manufacturer Part Number Package Notes
Microchip LAN8720A 24-QFN (4x4mm) RMII only, smaller package
Microchip LAN8740A 24-QFN RMII, with wake-on-LAN
Realtek RTL8201F 24-QFN RMII, single supply 3.3V
TI DP83848I 48-LQFP MII/RMII, industrial temp
Microchip KSZ8041NL 32-QFN MII/RMII, 10/100 PHY

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NCP302045MNTWG

45V 5A programmable overcurrent protection switch, 50mΩ Ron, -60V reverse polarity, DFN-8

Brand: ON

Package: DFN-8 (3x3mm, 0.65mm pitch)

IN STOCK: 4759pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1