Opens in a new tab

TPS22915BYFPR

2A load switch, 37mOhm Ron, 1.05V-5.5V, QOD, controlled slew rate, 0.74×0.74mm DSBGA

7650

Effective Inventory

Image for reference only

Manufacturer Part:

TPS22915BYFPR

Package:

DSBGA-4 (0.74 x 0.74 x 0.5 mm, YFP)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS22915BYFPR from Texas Instruments is an integrated single-channel load switch with 37mohm on-resistance, 2A continuous current rating, and quick output discharge (QOD). It supports 1.05V to 5.5V input voltage with controlled slew rate to reduce inrush current, in an ultra-small 0.74×0.74mm DSBGA package.

Key Specifications

Manufacturer Texas Instruments
Input Voltage Range 1.05V ~ 5.5V
Max Continuous Current 2A
On-Resistance 37mOhm @ 5V, 38mOhm @ 3.3V
Quiescent Current 7.7uA (typ) @ 3.3V
Rise Time (B version) 64us @ 3.3V
Quick Output Discharge 143 ohm pulldown
Package DSBGA-4 (0.74 x 0.74mm)
Operating Temperature -40°C ~ 105°C

Features

  • Ultra-small 0.74 x 0.74mm DSBGA (YFP) package
  • Low on-resistance: 37mohm at 5V
  • 2A maximum continuous switch current
  • Controlled slew rate reduces inrush current
  • Quick output discharge (QOD) via integrated 143 ohm pulldown
  • Wide input voltage range: 1.05V to 5.5V
  • Low quiescent current: 7.7uA typical at 3.3V
  • Low control input threshold for 1V GPIO compatibility

Applications

  • Smartphones and tablets power management
  • Wearable devices and portable electronics
  • IoT sensors and modules
  • Battery-powered systems with multiple power rails
  • Space-constrained load switching
Product Introduction: TPS22915BYFPR Product Introduction

The Texas Instruments TPS22915BYFPR is a small, low on-resistance single-channel load switch with controlled slew rate and quick output discharge. The device integrates an N-channel MOSFET that operates over a wide input voltage range of 1.05V to 5.5V and supports up to 2A of continuous current. The controlled rise time significantly reduces inrush current caused by large bulk load capacitances, minimizing power supply droop. The integrated 143-ohm pulldown resistor provides quick output discharge when the switch is turned off, ensuring a predictable power-down sequence. The ultra-small 0.74 x 0.74mm DSBGA package makes it ideal for space-constrained battery-powered applications.

Working Principle: TPS22915BYFPR Working Principle

The TPS22915BYFPR operates as an integrated load switch with four key functional blocks: 1) N-Channel MOSFET: The main switching element connects VIN to VOUT when enabled, with a low 37mohm on-resistance at 5V. The gate drive is internally generated to ensure full enhancement of the MOSFET. 2) Controlled Slew Rate: The gate drive voltage is ramped at a controlled rate, producing a rise time of approximately 64us (B version) at 3.3V, which limits the inrush current into downstream capacitors and prevents supply voltage droop. 3) Quick Output Discharge (QOD): When the switch is disabled, an integrated 143-ohm pulldown resistor connects the output to ground, rapidly discharging any load capacitance and ensuring a clean power-down. 4) Control Logic: The ON pin accepts low-voltage GPIO signals (compatible with 1V logic), enabling direct control from modern low-voltage processors.

Pin Description: TPS22915BYFPR Pin Definition and Functions
Pin Name Type Function
A1 VIN Power Input supply voltage (1.05V to 5.5V)
A2 ON Input Enable control (active high)
B1 GND Ground Ground connection
B2 VOUT Output Switched output to load
Application Scenarios: In which products and applications is TPS22915BYFPR used
  • Power rail sequencing and switching in smartphones and tablets
  • Wearable device power management with tight space constraints
  • IoT sensor modules requiring controlled power-up/down
  • Battery-powered systems with multiple voltage domains
  • Portable electronics needing inrush current limiting
Alternative Models: What chips are recommended as replacements for TPS22915BYFPR
Manufacturer Part Number Package Notes
TI TPS22914BYFPR DSBGA-4 Without QOD, same footprint
TI TPS22915CYFPR DSBGA-4 913us rise time (C version)
TI TPS22916BYFPR DSBGA-4 With auto-discharge and reverse current blocking
onsemi FPF1320UCX WLCSP-4 1.5A, similar form factor
TI TPS22918BYFPR DSBGA-6 Adjustable rise time

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NCP302045MNTWG

45V 5A programmable overcurrent protection switch, 50mΩ Ron, -60V reverse polarity, DFN-8

Brand: ON

Package: DFN-8 (3x3mm, 0.65mm pitch)

IN STOCK: 4759pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1