Opens in a new tab

FAN5333BSX

Boost LED driver, 30V/1.5A switch, 1.5MHz, 315mV Vfb, SOT-23-5

3210

Effective Inventory

Image for reference only

Manufacturer Part:

FAN5333BSX

Package:

5-SOT-23 (2.9 x 1.6 x 1.3mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The FAN5333BSX from onsemi is a high-efficiency boost LED driver with a 30V integrated N-channel MOSFET switch. It features 1.5MHz switching frequency, up to 1.5A peak switch current, 315mV feedback voltage, cycle-by-cycle current limit, and over-voltage protection in a 5-pin SOT-23 package.

Key Specifications

Manufacturer onsemi
Topology Boost (Step-Up)
Input Voltage 1.8V to 5.5V
Output Voltage Up to 30V
Peak Switch Current 1.5A
Output Power 1.5W
Switching Frequency 1.5MHz
Feedback Voltage 315mV (FAN5333B)
Shutdown Current <1uA
Package 5-SOT-23 (2.9 x 1.6mm)
Operating Temperature -40C to +85C

Features

  • 1.5MHz fixed switching frequency
  • 30V integrated N-channel MOSFET switch
  • Up to 1.5A peak switch current
  • 1.5W output power capability
  • Low shutdown current: <1uA
  • Cycle-by-cycle current limit
  • Low feedback voltage: 315mV (B version)
  • Over-voltage protection
  • Internal compensation
  • Thermal shutdown

Applications

  • Cell phone flash LED drivers
  • PDAs and handheld devices
  • Display bias supplies
  • LED backlighting
  • Camera flash modules
Product Introduction: FAN5333BSX Product Introduction

The onsemi FAN5333BSX is a general-purpose LED driver featuring fixed-frequency PWM operation and an integrated FET switch. The high output power makes it suitable for driving flash LEDs in serial connections. The 1.5MHz switching frequency minimizes switching noise measured at the battery terminal of handheld communications equipment. The low on-resistance of the internal N-channel switch ensures high efficiency and low power dissipation. The 315mV feedback voltage minimizes power loss in the current-setting resistor. Cycle-by-cycle current limiting keeps the peak switch current below 1.5A, while over-voltage protection and thermal shutdown provide comprehensive fault protection.

Working Principle: FAN5333BSX Working Principle

The FAN5333BSX operates as a fixed-frequency boost converter for LED driving: 1) Boost Regulation: The internal N-channel MOSFET switches at 1.5MHz, storing energy in an external inductor during the on-time and releasing it to the output through an external Schottky diode during the off-time. The output voltage rises to whatever level is needed to drive the LED string current. 2) Current Regulation: The feedback (FB) pin monitors the voltage across an external current-setting resistor in series with the LEDs. The regulator adjusts the switch duty cycle to maintain 315mV at the FB pin, setting the LED current to ILED = 315mV/RSET. 3) Protection: Cycle-by-cycle current limiting protects the switch during overload. Over-voltage protection activates if the output exceeds the safe range. Thermal shutdown disables the device at excessive junction temperatures.

Pin Description: FAN5333BSX Pin Definition and Functions
Pin Name Type Function
1 SW Output Switch pin (connect to inductor and Schottky)
2 GND Ground Ground
3 SHDN Input Shutdown control (active high to enable)
4 FB Input Current feedback (315mV reference)
5 VIN Power Input supply (1.8V to 5.5V)
Application Scenarios: In which products and applications is FAN5333BSX used
  • Serial flash LED driver in cell phone camera modules
  • LED backlight boost supply for handheld displays
  • Display bias voltage generation in portable devices
Alternative Models: What chips are recommended as replacements for FAN5333BSX
Manufacturer Part Number Package Notes
onsemi FAN5333ASX SOT-23-5 110mV feedback version
TI TPS61041DBVR SOT-23-5 28V, 500mA LED driver
Diodes Inc AL8805WS-7 SOT-25 30V, 1A LED driver
onsemi CAT4139TD-T3 SOT-23-5 25V, 750mA boost LED driver

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NCP302045MNTWG

45V 5A programmable overcurrent protection switch, 50mΩ Ron, -60V reverse polarity, DFN-8

Brand: ON

Package: DFN-8 (3x3mm, 0.65mm pitch)

IN STOCK: 4759pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1