Opens in a new tab

LMD18200T

3A 55V H-bridge motor driver, DMOS, thermal flag, current sense, TO-220-11

5180

Effective Inventory

Image for reference only

Manufacturer Part:

LMD18200T

Package:

TO-220-11 (20.0 x 4.5 x 10.7mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LMD18200T from Texas Instruments is a 3A, 55V H-bridge motor driver built with BiCMOS and DMOS technology. It features TTL/CMOS compatible inputs, thermal warning at 145C, thermal shutdown at 170C, internal clamp diodes, and current sense output in an 11-pin TO-220 package.

Key Specifications

Manufacturer Texas Instruments
Type Full H-Bridge Motor Driver
Supply Voltage 12V to 55V
Continuous Output Current 3A
Peak Output Current 6A (200ms)
RDS(ON) per Switch 0.33Ohm typ @ 3A
Control Mode PWM
Control Interface Hardware (GPIO)
Thermal Warning 145C flag output
Thermal Shutdown 170C (outputs off)
Current Sense Output 377uA/A typical
Package TO-220-11 (20.0 x 4.5mm)
Operating Temperature -40C to +125C

Features

  • 3A continuous, 6A peak output current
  • Operates at supply voltages up to 55V
  • Low RDS(ON): 0.33Ohm per switch typical
  • TTL and CMOS compatible inputs
  • No shoot-through current
  • Thermal warning flag at 145C
  • Thermal shutdown at 170C
  • Internal clamp diodes for inductive loads
  • Shorted load protection
  • Internal charge pump with external bootstrap
  • Current sense output for monitoring

Applications

  • DC and stepper motor driving
  • Industrial motion control
  • Robotics and automation
  • Building automation actuators
Product Introduction: LMD18200T Product Introduction

The Texas Instruments LMD18200T is a 3A H-bridge designed for motion control applications, built using a multi-technology process combining bipolar and CMOS control circuitry with DMOS power devices on the same monolithic structure. It is ideal for driving DC and stepper motors, accommodating peak output currents up to 6A. An innovative circuit facilitates low-loss sensing of the output current at 377uA/A typical. The device includes internal clamp diodes for driving inductive loads, a charge pump with external bootstrap capability, and comprehensive thermal management with a warning flag at 145C and shutdown at 170C. The TTL/CMOS compatible direction, brake, and PWM inputs simplify microcontroller interfacing.

Working Principle: LMD18200T Working Principle

The LMD18200T operates as a full H-bridge motor driver with four key subsystems: 1) H-Bridge Power Stage: Four DMOS switches (two sourcing, two sinking) form the H-bridge. The low RDS(ON) of 0.33Ohm per switch minimizes conduction losses. Anti-shoot-through circuitry prevents both switches on the same half-bridge from conducting simultaneously. 2) Control Logic: Three logic inputs (Direction, Brake, PWM) control the bridge state. Direction sets current flow, Brake shorts the motor terminals for rapid deceleration, and PWM controls speed through duty-cycle modulation. 3) Current Sense: A dedicated output provides a current proportional to the motor current (377uA/A), enabling external current monitoring and closed-loop control without a sense resistor in the motor path. 4) Protection: Thermal warning flag at 145C alerts the system, thermal shutdown at 170C disables outputs, and internal clamp diodes protect against inductive kickback.

Pin Description: LMD18200T Pin Definition and Functions
Pin Name Type Function
1 BOOT1 Capacitor Bootstrap capacitor 1
2 OUTPUT 1 Output H-bridge output 1
3 DIRECTION Input Direction control (TTL/CMOS)
4 BRAKE Input Brake control (TTL/CMOS)
5 PWM Input PWM speed control (TTL/CMOS)
6 VS Power Motor supply (12V-55V)
7 GND Ground Ground (connected to tab)
8 CURRENT SENSE Output Current sense output (377uA/A)
9 THERMAL FLAG Output Thermal warning (active low at 145C)
10 OUTPUT 2 Output H-bridge output 2
11 BOOT2 Capacitor Bootstrap capacitor 2
Application Scenarios: In which products and applications is LMD18200T used
  • DC motor bidirectional speed and position control
  • Stepper motor drive in CNC and 3D printers
  • Industrial actuator control with current monitoring
Alternative Models: What chips are recommended as replacements for LMD18200T
Manufacturer Part Number Package Notes
TI LMD18201T/NOPB TO-220-11 Similar, with different logic options
TI DRV8801EVM HTSSOP Newer 2.8A H-bridge driver
Allegro A3959SLBTR-T 16-SOIC 3A H-bridge with internal sense
ST VNH5019ATR-E MultiPowerSO-30 30A automotive H-bridge

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NCP302045MNTWG

45V 5A programmable overcurrent protection switch, 50mΩ Ron, -60V reverse polarity, DFN-8

Brand: ON

Package: DFN-8 (3x3mm, 0.65mm pitch)

IN STOCK: 4759pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1