Opens in a new tab

MAX7219

8-digit serial LED display driver, BCD decoder, 10MHz SPI, common-cathode, 24-DIP/SOIC

7250

Effective Inventory

Image for reference only

Manufacturer Part:

MAX7219

Package:

24-PDIP / 24-SOIC Wide (0.3in)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MAX7219 from Analog Devices (Maxim Integrated) is a serially interfaced 8-digit LED display driver that interfaces microprocessors to 7-segment numeric LED displays. It includes BCD code-B decoder, multiplex scan circuitry, segment and digit drivers, and 8×8 static RAM in 24-pin DIP and SO packages.

Key Specifications

Manufacturer Analog Devices (Maxim)
Type 8-Digit LED Display Driver
Display Type Common-Cathode
Number of Digits 8
Serial Interface Speed 10MHz
Operating Voltage 4.0V to 5.5V
Segment Drive Current -40mA typ (set by RSET)
Digit Drive Current 320mA sink
Shutdown Current 150uA
Display Scan Rate 800Hz (8 digits)
Operating Temperature 0C to +70C (C grade), -40C to +85C (E grade)
Package 24-DIP, 24-SOIC

Features

  • 10MHz serial interface
  • Independent LED segment control
  • Decode/no-decode digit selection
  • 150uA low-power shutdown (data retained)
  • Digital and analog brightness control
  • Display blanked on power-up
  • Drive common-cathode LED displays
  • Only one external resistor sets segment current
  • Individual digit addressing without rewriting entire display
  • 24-pin DIP and SO packages

Applications

  • 7-segment LED numeric displays
  • Bar-graph displays
  • LED matrix displays
  • Industrial panel meters
  • Point-of-sale terminals
Product Introduction: MAX7219 Product Introduction

The Analog Devices MAX7219 is a compact serial input/output common-cathode display driver that interfaces microprocessors to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs. On-chip features include a BCD code-B decoder, multiplex scan circuitry, segment and digit drivers, and an 8×8 static RAM that stores each digit. Only one external resistor is required to set the segment current for all LEDs. A convenient 4-wire serial interface connects to all common microprocessors. Individual digits may be addressed and updated without rewriting the entire display. The device includes 150uA low-power shutdown mode, analog and digital brightness control, and a scan-limit register for 1 to 8 digit display.

Working Principle: MAX7219 Working Principle

The MAX7219 operates as a serially controlled LED display driver with four key subsystems: 1) Serial Interface: Data is clocked in via DIN on CLK rising edges as 16-bit words (8-bit address, 8-bit data). LOAD/CS latches the data on its rising edge. Multiple devices can be daisy-chained through DOUT. 2) Decode Logic: The decode-mode register selects BCD code-B decoding or no-decode for each digit. BCD mode automatically maps numeric values to 7-segment patterns including hex characters. 3) Multiplex Scan: An internal oscillator drives the scanning of up to 8 digits at 800Hz, turning on one digit at a time while the corresponding segment data drives the anodes. The 8×8 static RAM maintains display data without processor intervention. 4) Brightness Control: An external RSET resistor sets maximum segment current. Digital brightness control uses a 16-step PWM duty cycle (1/32 to 31/32) for fine adjustment.

Pin Description: MAX7219 Pin Definition and Functions
Pin Name Type Function
1 DIN Input Serial data input
2-3,5-8,10-11 DIG0-DIG7 Output Digit drive lines (active low sink)
4,9 GND Ground Ground (both pins must be connected)
12 LOAD Input Load/latch data (rising edge)
13 CLK Input Serial clock (max 10MHz)
14-17,20-23 SEG A-G, DP Output Segment drive outputs (source)
18 ISET Input Current set (connect RSET to V+)
19 V+ Power Supply voltage (4.0-5.5V)
24 DOUT Output Serial data output (for daisy-chain)
Application Scenarios: In which products and applications is MAX7219 used
  • 7-segment LED panel meter displays in industrial equipment
  • 8×8 LED matrix displays for signage
  • Multi-digit counter and timer displays
Alternative Models: What chips are recommended as replacements for MAX7219
Manufacturer Part Number Package Notes
ADI/Maxim MAX7221 24-DIP/SOIC SPI compatible, slew-rate limited
ADI/Maxim MAX6951 16-QSOP 3V, with segment blinking
TI TLC59282DBQR 24-SOIC 16-channel LED driver
ADI/Maxim MAX6950 16-QSOP 8-digit, SPI, with blinking

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NCP302045MNTWG

45V 5A programmable overcurrent protection switch, 50mΩ Ron, -60V reverse polarity, DFN-8

Brand: ON

Package: DFN-8 (3x3mm, 0.65mm pitch)

IN STOCK: 4759pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1