Opens in a new tab

SI8663ED-B-ISR

6-ch digital isolator, 5kVrms, 150Mbps, 35kV/us CMTI, 3/3 FWD/REV, 16-SOIC-W

5162

Effective Inventory

Image for reference only

Manufacturer Part:

SI8663ED-B-ISR

Package:

16-SOIC Wide (10.3 x 7.5 x 2.35mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SI8663ED-B-ISR from Silicon Labs (Skyworks) is a 6-channel general-purpose digital isolator with 5000Vrms isolation, 150Mbps data rate, 35kV/us CMTI, and 3/3 forward/reverse channel configuration. It operates from 2.5V to 5.5V in a 16-SOIC wide-body package.

Key Specifications

Manufacturer Silicon Labs / Skyworks
Type General Purpose Digital Isolator
Number of Channels 6 (3 forward, 3 reverse)
Isolation Voltage 5000Vrms
Data Rate 150Mbps
Common Mode Transient Immunity 35kV/us min
Propagation Delay 13ns max
Pulse Width Distortion 4.5ns max
Supply Voltage 2.5V to 5.5V
Supply Current 9.1mA max per side
Technology Capacitive Coupling
Package 16-SOIC Wide (10.3 x 7.5mm)
Operating Temperature -40C to +125C

Features

  • 6-channel isolation with 3 forward and 3 reverse channels
  • 5000Vrms isolation rating with reinforced insulation
  • High CMTI: 35kV/us minimum
  • 150Mbps data rate support
  • Low propagation delay: 13ns max
  • Capacitive coupling technology
  • Schmitt trigger inputs for noise immunity
  • Ultra-low power consumption
  • Selectable fail-safe mode
  • UL, CSA, VDE, and CQC safety certifications
  • AEC-Q100 qualified

Applications

  • Industrial automation and control
  • Isolated ADC and DAC interfaces
  • Motor drive and inverter isolation
  • Power supply isolation
  • Medical electronics
Product Introduction: SI8663ED-B-ISR Product Introduction

The Silicon Labs SI8663ED-B-ISR is an ultra-low-power 6-channel digital isolator using capacitive coupling technology. It offers substantial advantages over legacy optocoupler-based isolation in data rate, propagation delay, power consumption, size, reliability, and external BOM. The device supports data rates up to 150Mbps with less than 13ns propagation delay and 4.5ns pulse width distortion. The 5000Vrms isolation rating with reinforced insulation meets IEC 61010-1 and IEC 60950-1 safety requirements. The 3/3 channel configuration (3 forward, 3 reverse) is ideal for bidirectional communication interfaces like SPI and UART. Schmitt trigger inputs provide high noise immunity, and the selectable fail-safe mode controls output state during power loss.

Working Principle: SI8663ED-B-ISR Working Principle

The SI8663ED-B-ISR operates through capacitive coupling isolation: 1) Signal Transmission: High-speed digital signals are modulated and transmitted across on-chip silicon dioxide capacitors that provide the galvanic isolation barrier. The capacitors block DC and low-frequency common-mode voltages while passing the high-frequency modulated signal. 2) Demodulation: The receiving side demodulates the signal and reconstructs the original digital waveform with minimal propagation delay (10ns typ) and pulse width distortion (1.5ns typ). 3) Common-Mode Rejection: The capacitive coupling architecture provides inherent common-mode transient immunity of 35kV/us minimum, making the device suitable for noisy industrial environments. 4) Fail-Safe: When input power is lost, the outputs assume a predefined state (high or low, selected by ordering option) preventing undefined system behavior.

Pin Description: SI8663ED-B-ISR Pin Definition and Functions
Pin Name Type Function
1 VDD1 Power Side 1 supply (2.5V to 5.5V)
2 INA Input Channel A input (forward)
3 INB Input Channel B input (forward)
4 INC Input Channel C input (forward)
5-6 OUTD/OUTE Output Channels D,E output (reverse)
7 OUTF Output Channel F output (reverse)
8 GND1 Ground Side 1 ground
9 GND2 Ground Side 2 ground
10 INF Input Channel F input (reverse)
11-12 INE/IND Input Channels E,D input (reverse)
13 OUTC Output Channel C output (forward)
14 OUTB Output Channel B output (forward)
15 OUTA Output Channel A output (forward)
16 VDD2 Power Side 2 supply (2.5V to 5.5V)
Application Scenarios: In which products and applications is SI8663ED-B-ISR used
  • Isolated SPI communication between MCU and high-voltage ADC
  • Motor drive gate driver isolation with bidirectional fault signaling
  • Industrial PLC digital I/O channel isolation
Alternative Models: What chips are recommended as replacements for SI8663ED-B-ISR
Manufacturer Part Number Package Notes
Skyworks SI8663BD-B-ISR 16-SOIC-W 3.75kV version
TI ISO7763FDWR 16-SOIC-W 6-ch, 5kV, 100Mbps
ADI ADuM7643CRQZ 16-QSOP 6-ch, 5kV, 150Mbps
Renesas ISOW7843DFMR 16-SOIC-W 4-ch with integrated DC-DC

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NCP302045MNTWG

45V 5A programmable overcurrent protection switch, 50mΩ Ron, -60V reverse polarity, DFN-8

Brand: ON

Package: DFN-8 (3x3mm, 0.65mm pitch)

IN STOCK: 4759pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1