Opens in a new tab

SN65HVD232QDRQ1

3.3V CAN transceiver, 1Mbps, AEC-Q100, +-36V fault protection, 8-SOIC

7800

Effective Inventory

Image for reference only

Manufacturer Part:

SN65HVD232QDRQ1

Package:

8-SOIC (5.0 x 4.0 x 1.5mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SN65HVD232QDRQ1 from Texas Instruments is an AEC-Q100 qualified CAN bus transceiver with 1Mbps data rate, 3.3V supply, bus-fault protection to +-36V, and low-power standby mode. It provides the physical layer interface between the CAN protocol controller and the bus in an 8-pin SOIC package.

Key Specifications

Manufacturer Texas Instruments
Type CAN Bus Transceiver
Signaling Rate Up to 1Mbps
Supply Voltage 3.3V
Common-Mode Range -12V to +12V
Bus Fault Protection +-36V
Qualification AEC-Q100 Grade 1
Standby Current 200uA typical
Loop Delay 180ns typical
Package 8-SOIC (5.0 x 4.0mm)
Operating Temperature -40C to +125C

Features

  • AEC-Q100 Grade 1 qualified for automotive
  • 3.3V single supply operation
  • 1Mbps CAN data rate
  • +-36V bus fault protection
  • Low-power standby mode
  • ISO 11898 compliant
  • Unpowered node does not disturb the bus
  • Cross-wire, overvoltage, and ground loss protection
  • Common-mode range: -12V to +12V
  • Hot-plug capable

Applications

  • Automotive CAN bus networks
  • Industrial CAN networks
  • Motor vehicle body electronics
  • Building automation CAN systems
Product Introduction: SN65HVD232QDRQ1 Product Introduction

The Texas Instruments SN65HVD232QDRQ1 is an AEC-Q100 Grade 1 qualified CAN bus transceiver designed for use with the Controller Area Network (CAN) serial communication protocol. Operating from a single 3.3V supply, it provides the physical layer interface between the CAN protocol controller and the differential bus. The device supports data rates up to 1Mbps and provides +-36V bus fault protection, meeting the requirements of ISO 11898. The low-power standby mode reduces current consumption to 200uA typical for battery-saving applications. The transceiver is designed for harsh automotive environments with cross-wire, overvoltage, and ground loss protection. An unpowered node presents a high-impedance state that does not disturb the bus, supporting hot-plug applications.

Working Principle: SN65HVD232QDRQ1 Working Principle

The SN65HVD232QDRQ1 operates as a CAN physical layer transceiver: 1) Transmit Path: When the CAN controller drives the TXD pin low (dominant), the transceiver drives the CANH line high and CANL line low, creating a differential voltage of approximately 2V on the bus. When TXD is high (recessive), both bus lines are biased to 2.5V (0V differential). 2) Receive Path: The differential receiver continuously monitors the bus voltage. When CANH-CANL exceeds the dominant threshold (0.9V), the RXD output goes low. When below the recessive threshold (0.5V), RXD goes high. 3) Protection: The bus pins can withstand +-36V DC fault conditions. During common-mode events (e.g., ground shift), the -12V to +12V common-mode range ensures reliable reception. 4) Standby Mode: The RS (Rate Select / Standby) pin enables a low-power standby mode where the driver is disabled and the receiver operates at reduced bandwidth for wake-up detection.

Pin Description: SN65HVD232QDRQ1 Pin Definition and Functions
Pin Name Type Function
1 D Input Transmit data input (from CAN controller)
2 GND Ground Ground
3 VCC Power 3.3V supply
4 R Output Receive data output (to CAN controller)
5 NC – No connection
6 CANL I/O CAN bus low line
7 CANH I/O CAN bus high line
8 RS Input Rate select / standby mode control
Application Scenarios: In which products and applications is SN65HVD232QDRQ1 used
  • Automotive CAN bus body electronics with AEC-Q100 qualification
  • 3.3V microcontroller CAN interface in industrial systems
  • Building automation CAN network nodes
Alternative Models: What chips are recommended as replacements for SN65HVD232QDRQ1
Manufacturer Part Number Package Notes
TI SN65HVD230QDRQ1 8-SOIC 3.3V, without standby
TI SN65HVD231QDRQ1 8-SOIC 3.3V, with standby only
NXP TJA1042T/3/1J 8-SOIC 5V, with standby and VIO
Infineon TLE6250GV33XUMA1 8-SOIC 3.3V CAN transceiver

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NCP302045MNTWG

45V 5A programmable overcurrent protection switch, 50mΩ Ron, -60V reverse polarity, DFN-8

Brand: ON

Package: DFN-8 (3x3mm, 0.65mm pitch)

IN STOCK: 4759pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1