Opens in a new tab

FT232RQ-REEL

USB to UART Bridge IC, 3MBaud, integrated EEPROM/clock, QFN-32

2716

Effective Inventory

Image for reference only

Manufacturer Part:

FT232RQ-REEL

Package:

QFN-32 (5.0 x 5.0 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The FT232RQ-REEL from FTDI Chip is a USB to serial UART bridge interface IC in a QFN-32 package. It integrates an entire USB protocol engine, EEPROM, clock generation circuitry, and USB termination resistors in a single chip. The device supports data transfer rates up to 3MBaud with 256-byte TX and 128-byte RX FIFO buffers, and provides multi-protocol serial interface options including RS232, RS422, and RS485.

Key Specifications

USB Standard USB 2.0 Full Speed (12Mbps)
Max Data Rate 3MBaud
TX FIFO 256 bytes
RX FIFO 128 bytes
IO Voltage 1.8V to 5.25V
Supply Current 15mA typical
Suspend Current 70uA typical
CBUS Pins 5 configurable I/O
Operating Temperature -40C to +85C
Package QFN-32 (5x5mm)
Status EOL (replaced by FT232RNQ)

Features

  • Single-chip USB to UART bridge solution
  • Integrated EEPROM for USB VID/PID/serial number
  • Integrated USB termination resistors
  • Integrated clock generation (no external crystal needed)
  • Multi-protocol support (RS232, RS422, RS485, TTL)
  • 5 configurable CBUS pins for status and control
  • Adjustable IO voltage from 1.8V to 5.25V
  • Supports bus-powered and self-powered configurations
  • FIFO receive and transmit buffers for smooth data flow

Applications

  • USB to RS232/RS485/RS422 adapter cables
  • Embedded system debug and programming interfaces
  • Industrial equipment USB connectivity
  • Legacy serial device USB upgrade
  • Arduino and maker board USB interface
Product Introduction: FT232RQ-REEL Product Introduction

The FT232RQ-REEL from FTDI Chip is a complete USB to serial UART bridge interface in a compact QFN-32 package. It integrates all necessary USB functionality including protocol handling, EEPROM for configuration storage, clock generation, and USB termination resistors, requiring no external components beyond a bypass capacitor. Supporting data rates up to 3MBaud with 256/128-byte TX/RX FIFOs, it provides reliable USB connectivity for embedded systems. The device supports multi-protocol serial communication including RS232, RS422, and RS485 through external transceivers. Note: this device is EOL and being replaced by the FT232RNQ.

Working Principle: FT232RQ-REEL Working Principle

The FT232RQ-REEL functions as a bridge between the USB bus and a UART serial port. On the USB side, the internal USB protocol engine handles enumeration, data packet formatting, and all USB 2.0 Full Speed protocol requirements. The integrated EEPROM stores USB descriptors including VID, PID, and serial number. On the UART side, data from the USB host is written to the TX FIFO buffer and transmitted serially at the configured baud rate. Incoming serial data is captured into the RX FIFO and sent to the USB host. The 5 CBUS pins can be configured for various functions including TX/RX LED indicators, power enable, and wake-up signals. The adjustable VCCIO pin sets the IO voltage independently from the USB supply.

Pin Description: FT232RQ-REEL Pin Definition and Functions
Pin Name Type Function
1 VCC Power 3.3V internal regulator output (bypass only)
2 3V3OUT Power 3.3V regulated output
3 USBDP I/O USB data positive (D+)
4 USBDM I/O USB data negative (D-)
5 GND Power Ground
6 RESET Control Reset (active low, internal pull-up)
7 VCCIO Power IO voltage reference (1.8-5.25V)
8 TXD Output UART transmit data
9 RXD Input UART receive data
10 RTS Output Request to send (active low)
11 CTS Input Clear to send (active low)
12 DTR Output Data terminal ready (active low)
13 DSR Input Data set ready (active low)
14 DCD Input Data carrier detect (active low)
15 RI Input Ring indicator (active low)
16-20 CBUS0-4 I/O Configurable I/O pins
21 EECS Control EEPROM chip select
22 EECLK Control EEPROM clock
23 EEDATA I/O EEPROM data
24 TEST Test Test pin (connect to GND)
25-28 VDD/GND Power Supply and ground
Application Scenarios: In which products and applications is FT232RQ-REEL used
  • USB to RS232/RS485 serial adapter cables and dongles
  • Embedded MCU debug and programming interfaces
  • Industrial equipment USB communication ports
  • Legacy serial device USB connectivity upgrade
  • Maker and development board USB serial interface
Alternative Models: What chips are recommended as replacements for FT232RQ-REEL
Manufacturer Part Number Package Notes
FTDI FT232RNQ QFN-32 Direct replacement (RoHS compliant)
FTDI FT232RL SSOP-28 Through-hole friendly version
Silicon Labs CP2102N-A02-GQFN24 QFN-24 Smaller footprint USB-UART bridge
WCH CH340G SOP-16 Low-cost USB-UART alternative

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NCP302045MNTWG

45V 5A programmable overcurrent protection switch, 50mΩ Ron, -60V reverse polarity, DFN-8

Brand: ON

Package: DFN-8 (3x3mm, 0.65mm pitch)

IN STOCK: 4759pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1