Opens in a new tab

LM74700QDBVRQ1

Automotive ideal diode controller, 65V, 26mV drop, AEC-Q100, SOT-23-6

7890

Effective Inventory

Image for reference only

Manufacturer Part:

LM74700QDBVRQ1

Package:

SOT-23-6 (2.9 x 1.6 x 1.1 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM74700QDBVRQ1 from Texas Instruments is an automotive-qualified ideal diode controller that drives an external N-channel MOSFET to emulate a near-ideal Schottky diode. In a SOT-23-6 package, it provides reverse polarity protection and power supply ORing with only 26mV forward voltage drop.

Key Specifications

Operating Voltage 3V ~ 65V
Forward Voltage Drop 26mV (regulated)
Reverse Current 3uA max
Gate Drive Voltage 12V above ANODE
Quiescent Current 155uA (operating)
Qualification AEC-Q100 Grade 1
Operating Temperature -40°C ~ 125°C
Package SOT-23-6

Features

  • AEC-Q100 Grade 1 automotive qualified
  • 65V maximum operating voltage
  • 26mV regulated forward voltage drop
  • 3uA max reverse leakage current
  • 12V gate drive for standard N-channel MOSFETs
  • Fast reverse current protection (0.5us)

Applications

  • Automotive battery reverse polarity protection
  • Power supply ORing and redundancy
  • Battery backup switchover systems
  • Industrial 24V bus protection
  • LED lighting power protection
Product Introduction: LM74700QDBVRQ1 Product Introduction

The LM74700QDBVRQ1 is an automotive-qualified ideal diode controller from Texas Instruments that drives an external N-channel MOSFET to emulate an ideal diode with just 26mV forward voltage drop. AEC-Q100 Grade 1 qualified, it operates from 3V to 65V, covering the full automotive battery voltage range including load dump transients. The controller regulates the MOSFET gate to maintain 26mV across the MOSFET during forward conduction, automatically turning off the MOSFET within 0.5us when reverse current is detected. This eliminates the power dissipation and voltage drop of conventional Schottky diodes.

Working Principle: LM74700QDBVRQ1 Working Principle

The LM74700 monitors the voltage across the external N-channel MOSFET between the ANODE and CATHODE pins. When forward current flows (ANODE > CATHODE), the controller drives the GATE pin 12V above ANODE to fully enhance the MOSFET, achieving near-zero voltage drop. A regulation loop maintains 26mV across the MOSFET for smooth current handling. When reverse current is detected (CATHODE > ANODE), the gate is pulled low within 0.5us, blocking reverse current. An integrated charge pump provides the gate drive voltage above the anode supply rail without external components.

Pin Description: LM74700QDBVRQ1 Pin Definition and Functions
Pin Name Type Function
1 GATE Output MOSFET gate drive
2 CATHODE Input Sense output / MOSFET drain
3 EN Input Enable (active high)
4 GND Power Ground
5 VIN Input Supply input (3-65V)
6 ANODE Input Sense input / MOSFET source
Application Scenarios: In which products and applications is LM74700QDBVRQ1 used
  • Automotive 12V/24V battery reverse polarity protection
  • Redundant power supply ORing in ADAS systems
  • Industrial 24V bus reverse current blocking
  • Battery backup hot-swap protection
  • LED driver supply polarity protection
Alternative Models: What chips are recommended as replacements for LM74700QDBVRQ1
Manufacturer Part Number Package Notes
TI LM74701QDBVRQ1 SOT-23-6 Higher gate drive, 65V
Analog Devices LTC4359IMS8#PBF 8-MSOP Ideal diode controller, 80V
Maxim MAX16141 6-TDFN Ideal diode, 5.5V-60V
Infineon BTS50015-1TAE TO-252 Smart high-side switch alternative

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NCP302045MNTWG

45V 5A programmable overcurrent protection switch, 50mΩ Ron, -60V reverse polarity, DFN-8

Brand: ON

Package: DFN-8 (3x3mm, 0.65mm pitch)

IN STOCK: 4759pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1