Opens in a new tab

INA333AIDGKR

Zero-drift instrumentation amp, 25μV Vos, 50μA Iq, 1.8-5.5V, VSSOP-8

10935

Effective Inventory

Image for reference only

Manufacturer Part:

INA333AIDGKR

Package:

VSSOP-8 / DGK-8 (3.0 x 4.9 x 1.15mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The INA333AIDGKR from Texas Instruments is a micro-power (50μA), zero-drift, rail-to-rail output instrumentation amplifier in a VSSOP-8 (DGK) package. With offset voltage of 25μV max, drift of 0.1μV/°C, and gain set by a single external resistor from 1 to 1000, it is ideal for precision measurement in battery-powered and portable applications.

Key Specifications

Input Offset Voltage 25μV max (G≥100)
Offset Drift 0.1μV/°C (G≥100)
Noise Density 50nV/√Hz (G≥100)
CMRR 100dB min (G≥10)
Input Bias Current 200pA max
Supply Voltage 1.8V to 5.5V
Quiescent Current 50μA
Bandwidth 150kHz (G=1)
Gain Range 1 to 1000 (external resistor)
Package VSSOP-8 (3.0 x 4.9mm)
Operating Temperature -40°C to +125°C

Features

  • Zero-drift: 0.1μV/°C offset drift
  • Ultralow offset: 25μV max (G≥100)
  • Low noise: 50nV/√Hz (G≥100)
  • High CMRR: 100dB min (G≥10)
  • Low bias current: 200pA max
  • Rail-to-rail output
  • Single resistor gain setting: G = 1 + (100kΩ/RG)
  • RFI filtered inputs
  • Micro-power: 50μA quiescent current

Applications

  • Bridge amplifier circuits
  • ECG and medical instrumentation
  • Pressure and load cell sensors
  • Thermocouple amplifiers
  • RTD sensor amplifiers
Product Introduction: INA333AIDGKR Product Introduction

The INA333AIDGKR from Texas Instruments is a low-power, precision instrumentation amplifier offering excellent accuracy with zero-drift technology. It provides very low offset voltage (25μV max at G≥100), excellent offset voltage drift (0.1μV/°C), and high CMRR (100dB at G≥10). Operating from 1.8V to 5.5V with only 50μA quiescent current, it is ideal for battery-operated systems. Gain is set by a single external resistor from 1 to 1000 using the standard equation G = 1 + (100kΩ/RG).

Working Principle: INA333AIDGKR Working Principle

The INA333 uses a three-op-amp instrumentation amplifier topology with auto-calibration (chopper stabilization) to achieve zero-drift performance. The input stage consists of two auto-zeroed amplifiers that continuously correct their own offset, providing ultra-low 25μV offset and 0.1μV/°C drift. The differential input signal is amplified by the gain stage, with gain determined by a single external resistor RG using G = 1 + (100kΩ/RG). The output stage provides rail-to-rail output swing. RFI filtered inputs prevent high-frequency interference from aliasing into the baseband signal.

Pin Description: INA333AIDGKR Pin Definition and Functions
Pin Name Type Function
1 RG Passive Gain resistor connection
2 VIN- Input Inverting input
3 VIN+ Input Non-inverting input
4 V- Power Negative supply
5 REF Input Reference input (connect to GND)
6 VOUT Output Amplifier output
7 V+ Power Positive supply
8 RG Passive Gain resistor connection
Application Scenarios: In which products and applications is INA333AIDGKR used
  • Wheatstone bridge amplifiers for strain gauges and load cells
  • ECG and biopotential measurement front-ends
  • Precision pressure sensor signal conditioning
  • Thermocouple cold-junction compensated amplifiers
  • RTD temperature sensor 3-wire/4-wire interfaces
Alternative Models: What chips are recommended as replacements for INA333AIDGKR
Manufacturer Part Number Package Notes
TI INA333AIDRGR WSON-8 Same die, WSON package
TI INA3221AIRSVR UQFN-16 3-channel, 1.8V instrumentation amp
ADI AD8237ARMZ MSOP-8 Zero-drift, rail-to-rail in-amp
Maxim MAX4238AUT SOT-23-6 Zero-drift op-amp alternative
Microchip MCP6N11-010E/SN SOIC-8 Zero-drift instrumentation amp

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NCP302045MNTWG

45V 5A programmable overcurrent protection switch, 50mΩ Ron, -60V reverse polarity, DFN-8

Brand: ON

Package: DFN-8 (3x3mm, 0.65mm pitch)

IN STOCK: 4759pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1