Opens in a new tab

LM75BDP

I2C digital temp sensor, 11-bit 0.125°C, ±2°C accuracy, OS output, TSSOP-8

6168

Effective Inventory

Image for reference only

Manufacturer Part:

LM75BDP

Package:

TSSOP-8 (4.9 x 3.0 x 1.1mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM75BDP from NXP Semiconductors is a digital temperature sensor and thermal watchdog with I2C/SMBus interface in a TSSOP-8 package. It provides 11-bit (0.125°C) resolution temperature-to-digital conversion from -55°C to +125°C, with programmable overtemperature shutdown and hysteresis outputs.

Key Specifications

Temperature Range -55°C to +125°C
Resolution 11-bit (0.125°C)
Accuracy ±2°C (-25°C to +100°C)
Interface I2C / SMBus (up to 400kHz)
Supply Voltage 2.8V to 5.5V
Supply Current (Active) 1mA typ.
Supply Current (Shutdown) 3.5μA typ.
Conversion Time 100ms typ.
OS Output Type Open-drain (active low)
I2C Addresses 8 selectable (via A0-A2 pins)
Package TSSOP-8
Operating Temperature -55°C to +125°C

Features

  • 11-bit temperature resolution (0.125°C)
  • ±2°C accuracy from -25°C to +100°C
  • I2C/SMBus compatible interface (up to 400kHz)
  • Programmable overtemperature shutdown (OS) output
  • Programmable hysteresis threshold
  • 8 selectable I2C addresses (A0-A2 pins)
  • Shutdown mode for power conservation (3.5μA)
  • One-shot conversion mode
  • Drop-in compatible with industry-standard LM75

Applications

  • System temperature monitoring
  • PC and server thermal management
  • Industrial temperature sensing
  • Battery temperature monitoring
  • Hard disk drive temperature protection
Product Introduction: LM75BDP Product Introduction

The LM75BDP from NXP Semiconductors is a temperature-to-digital converter using an on-chip bandgap temperature sensor and sigma-delta ADC with 11-bit resolution (0.125°C). The device provides an overtemperature shutdown (OS) output with programmable threshold and hysteresis, making it ideal as a thermal watchdog. The I2C/SMBus compatible interface supports up to 400kHz clock speed, and up to 8 devices can share the same bus via the A0-A2 address select pins. A shutdown mode reduces current consumption to 3.5μA for power-sensitive applications. Pin-for-pin compatible with the industry standard LM75 and LM75A.

Working Principle: LM75BDP Working Principle

The LM75BDP uses a bandgap temperature sensor whose output voltage is proportional to absolute temperature (PTAT). This analog voltage is digitized by an internal sigma-delta ADC to produce an 11-bit two’s complement temperature value. The temperature register is continuously updated at a default rate of one conversion every 100ms. The OS output compares the measured temperature against two programmable thresholds: Tos (overtemperature shutdown) and Thyst (hysteresis). When temperature exceeds Tos, the OS pin activates (active low, open-drain). The OS pin deactivates only when the temperature drops below Thyst, providing a stable thermostat behavior without oscillation.

Pin Description: LM75BDP Pin Definition and Functions
Pin Name Type Function
1 SDA I/O I2C serial data (bidirectional)
2 SCL Input I2C serial clock
3 OS Output Overtemperature shutdown output (open-drain)
4 GND Power Ground
5 A2 Input I2C address select bit 2
6 A1 Input I2C address select bit 1
7 A0 Input I2C address select bit 0
8 VCC Power Supply voltage (2.8V to 5.5V)
Application Scenarios: In which products and applications is LM75BDP used
  • PC and server motherboard thermal monitoring and fan control
  • Industrial equipment overtemperature alarm and protection
  • Battery pack temperature monitoring in EV and UPS
  • Hard disk drive thermal protection
  • Multi-zone temperature sensing with up to 8 sensors on one bus
Alternative Models: What chips are recommended as replacements for LM75BDP
Manufacturer Part Number Package Notes
TI LM75BDP/NOPB TSSOP-8 Pin-compatible, same function
ADI ADT75BRZ SOIC-8 12-bit, 0.0625°C resolution
Microchip AT30TS750A-MA8M-T SOIC-8 12-bit, programmable alert
ST STDS75 SOIC-8 12-bit, 0.0625°C, pin-compatible
Maxim DS75S+ SOIC-8 12-bit, 0.0625°C, auto-conversion

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NCP302045MNTWG

45V 5A programmable overcurrent protection switch, 50mΩ Ron, -60V reverse polarity, DFN-8

Brand: ON

Package: DFN-8 (3x3mm, 0.65mm pitch)

IN STOCK: 4759pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1