Opens in a new tab

BD41030FJ-CGE2

Automotive LIN transceiver, LIN 2.2A, 20kbps, 3μA sleep, AEC-Q100, SOP-J8

10840

Effective Inventory

Image for reference only

Manufacturer Part:

BD41030FJ-CGE2

Package:

SOP-J8 (4.9 x 6.0 x 1.65mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The BD41030FJ-CGE2 from ROHM Semiconductor is an AEC-Q100 qualified LIN (Local Interconnect Network) transceiver in a SOP-J8 package. Supporting LIN 2.0/2.1/2.2/2.2A specifications at data rates up to 20kbps, it features extremely low 3μA sleep mode current, built-in ESD protection, thermal shutdown, and overcurrent protection for automotive body electronics networking.

Key Specifications

Protocol LIN 2.0/2.1/2.2/2.2A
Data Rate Up to 20kbps
Supply Voltage (VBAT) 5V to 27V
Supply Current (Sleep) 3μA typ. / 8μA max
Supply Current (Standby) 400μA typ.
Supply Current (Normal) 1mA typ.
LIN Pin Abs. Max -27V to +40V
TXD/RXD Logic 3.3V / 5.0V compatible
Built-in LIN Slave Terminator Yes
Thermal Shutdown Yes (170°C typ.)
Package SOP-J8 (4.9 x 6.0 x 1.65mm)
Operating Temperature -40°C to +125°C
AEC-Q100 Grade Grade 1

Features

  • LIN 2.0/2.1/2.2/2.2A compliant
  • AEC-Q100 Grade 1 qualified
  • Ultra-low sleep current: 3μA typ.
  • LIN pin absolute max: -27V to +40V
  • Built-in LIN slave terminator
  • 3.3V/5.0V logic interface (RXD/TXD)
  • TXD dominant time-out function
  • Resistant to LIN-BAT/GND short-circuit
  • Built-in thermal shutdown (TSD)
  • High EMI immunity, low EME

Applications

  • Automotive body electronics LIN networks
  • Door modules and seat controllers
  • Lighting control LIN interfaces
  • Climate control LIN communication
  • Motor control LIN bus transceivers
Product Introduction: BD41030FJ-CGE2 Product Introduction

The BD41030FJ-CGE2 from ROHM Semiconductor is an AEC-Q100 Grade 1 qualified LIN transceiver designed for in-vehicle Local Interconnect Network applications. Supporting LIN 2.0/2.1/2.2/2.2A specifications at data rates up to 20kbps, it features extremely low 3μA sleep mode current, built-in LIN slave terminator, 3.3V/5.0V compatible logic interface, TXD dominant time-out, and resistance to LIN-BAT/GND short-circuits. The -CGE2 suffix indicates automotive-grade (-40 to +125°C) green/halogen-free tape and reel packaging.

Working Principle: BD41030FJ-CGE2 Working Principle

The BD41030FJ operates as a LIN bus transceiver converting between the MCU UART TXD/RXD signals and the single-wire LIN bus signal. In transmit mode, the TXD input drives the LIN bus pin low (dominant) when TXD is low, and the bus is pulled high (recessive) via an external pull-up resistor when TXD is high. In receive mode, the LIN bus voltage level is compared against thresholds to generate the RXD output. The built-in LIN slave terminator eliminates the need for an external series diode and resistor for slave nodes. Sleep mode powers down most internal circuitry while maintaining the ability to wake on LIN bus activity, reducing current to just 3μA.

Pin Description: BD41030FJ-CGE2 Pin Definition and Functions
Pin Name Type Function
1 TXD Input Transmit data input from MCU
2 RXD Output Receive data output to MCU (open-drain)
3 VBAT Power Battery supply (5V to 27V)
4 NWAKE Input Local wake-up input
5 GND Power Ground
6 LIN I/O LIN bus connection
7 NSLP Input Sleep mode control (active low)
8 VCC Power Logic supply (3.3V or 5V)
Application Scenarios: In which products and applications is BD41030FJ-CGE2 used
  • Automotive door module LIN network nodes
  • Seat adjustment controller LIN interfaces
  • Interior and exterior lighting control LIN communication
  • HVAC climate control LIN bus transceivers
  • Window lift motor controller LIN connectivity
Alternative Models: What chips are recommended as replacements for BD41030FJ-CGE2
Manufacturer Part Number Package Notes
NXP TJA1021T SO-8 LIN 2.2 transceiver, AEC-Q100
TI TLIN1021DRQ1 SOIC-8 LIN 2.2, AEC-Q100 qualified
Infineon TLE7259-3GE TSSOP-8 LIN 2.2 transceiver, automotive
onsemi NCV7321D12R2G SOIC-8 LIN 2.2, AEC-Q100
Microchip MCP2003A-E/SN SOIC-8 LIN 2.2 transceiver, 20kbps

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NCP302045MNTWG

45V 5A programmable overcurrent protection switch, 50mΩ Ron, -60V reverse polarity, DFN-8

Brand: ON

Package: DFN-8 (3x3mm, 0.65mm pitch)

IN STOCK: 4759pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1