Opens in a new tab

OPA2376AIDGKR

Dual precision CMOS op-amp, 25μV Vos, 7.5nV/√Hz, 5.5MHz GBW, RRIO, VSSOP-8

14149

Effective Inventory

Image for reference only

Manufacturer Part:

OPA2376AIDGKR

Package:

VSSOP-8 / DGK (3.0 x 4.9 x 0.97mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The OPA2376AIDGKR from Texas Instruments is a dual-channel, low-noise, low-quiescent-current precision CMOS operational amplifier in a VSSOP-8 package. Using TI’s e-trim technology, it achieves 25μV max offset voltage, 0.32μV/°C drift, 7.5nV/√Hz noise, and 5.5MHz GBW with rail-to-rail input/output, operating from 2.2V to 5.5V supply.

Key Specifications

Number of Channels 2 (Dual)
Supply Voltage Range 2.2V to 5.5V
Gain Bandwidth Product 5.5MHz
Slew Rate 2V/μs
Input Offset Voltage 25μV max (5μV typ.)
Offset Drift 0.32μV/°C typ.
Input Bias Current 10pA max
Voltage Noise (1kHz) 7.5nV/√Hz typ.
0.1Hz-10Hz Noise 0.8μVpp typ.
Quiescent Current 760μA typ. / 950μA max per channel
CMRR 90dB typ. / 76dB min
Output Current 30mA typ.
THD+N (1kHz) 0.00027% typ.
Rail-to-Rail Input and Output
Package VSSOP-8 (3 x 4.9mm)
Operating Temperature -40°C to +125°C

Features

  • Low noise: 7.5nV/√Hz at 1kHz; 0.8μVpp 0.1-10Hz
  • Low offset voltage: 5μV typ., 25μV max (e-trim)
  • Ultra-low offset drift: 0.32μV/°C typ.
  • Low input bias current: 10pA max (CMOS input)
  • 5.5MHz GBW with 760μA quiescent current per channel
  • Rail-to-rail input and output
  • 2.2V to 5.5V single-supply operation
  • EMI-hardened input stage
  • Available in space-saving VSSOP-8, SOIC-8, DSBGA-8
  • e-trim technology for precision without chopper artifacts

Applications

  • Precision sensor signal conditioning
  • Low-noise audio preamplifiers
  • Medical instrumentation front-ends
  • Battery-powered portable instruments
  • Transimpedance amplifiers for photodiodes
Product Introduction: OPA2376AIDGKR Product Introduction

The OPA2376AIDGKR from Texas Instruments is a dual-channel precision CMOS operational amplifier using TI’s proprietary e-trim technology to achieve outstanding DC precision without chopper artifacts. It offers 25μV max input offset voltage, 0.32μV/°C drift, 7.5nV/√Hz voltage noise at 1kHz, and 5.5MHz gain bandwidth product, all from just 760μA per channel. The rail-to-rail input and output stages operate from a 2.2V to 5.5V single supply, making it ideal for precision portable and battery-powered applications. The EMI-hardened input stage reduces susceptibility to RF interference.

Working Principle: OPA2376AIDGKR Working Principle

The OPA2376 uses a CMOS input stage with TI’s e-trim technology, which performs precision trimming of the input offset voltage during final wafer test, achieving 25μV max offset without the switching artifacts associated with chopper-stabilized amplifiers. The rail-to-rail input stage uses complementary PMOS and NMOS differential pairs that cover the entire supply range. The output stage is a rail-to-rail class AB CMOS push-pull capable of swinging within 10mV of either rail. Internal frequency compensation ensures stability in unity-gain configurations. The 5.5MHz GBW and 2V/μs slew rate provide adequate bandwidth and settling for precision signal conditioning.

Pin Description: OPA2376AIDGKR Pin Definition and Functions
Pin Name Type Function
1 OUT A Output Amplifier A output
2 IN- A Input Amplifier A inverting input
3 IN+ A Input Amplifier A non-inverting input
4 V- Power Negative supply / Ground
5 IN+ B Input Amplifier B non-inverting input
6 IN- B Input Amplifier B inverting input
7 OUT B Output Amplifier B output
8 V+ Power Positive supply (2.2V to 5.5V)
Application Scenarios: In which products and applications is OPA2376AIDGKR used
  • Precision bridge sensor signal conditioning with low drift
  • Low-noise audio preamplifiers in portable recording equipment
  • Medical ECG/EEG front-end amplifiers requiring low bias current
  • Photodiode transimpedance amplifiers with 10pA input bias
  • Battery-powered instrumentation with 2.2V minimum supply
Alternative Models: What chips are recommended as replacements for OPA2376AIDGKR
Manufacturer Part Number Package Notes
TI OPA2376AIDR SOIC-8 Same specs, SOIC package
TI OPA2376AIDGKT VSSOP-8 Cut tape version
ADI ADA4522-2ARMZ MSOP-8 Zero-drift dual, 5.5V
ST TSV7392IQ2T DFN-8 Dual precision, 2.5V-5.5V
Microchip MCP6V92-E/SN SOIC-8 Zero-drift dual, 1.8-6V

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NCP302045MNTWG

45V 5A programmable overcurrent protection switch, 50mΩ Ron, -60V reverse polarity, DFN-8

Brand: ON

Package: DFN-8 (3x3mm, 0.65mm pitch)

IN STOCK: 4759pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1