Opens in a new tab

TLV3201AIDBVR

40ns single push-pull comparator, 40μA Iq, RR input, 2.7-5.5V, SOT-23-5

14066

Effective Inventory

Image for reference only

Manufacturer Part:

TLV3201AIDBVR

Package:

SOT-23-5 / DBV (2.9 x 2.8 x 1.45mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TLV3201AIDBVR from Texas Instruments is a 40ns high-speed single push-pull comparator in a SOT-23-5 package. It combines 40ns propagation delay with only 40μA supply current, featuring rail-to-rail input range extending 200mV beyond rails, 1mV typ. offset voltage, and operation from 2.7V to 5.5V over the -40°C to +125°C industrial temperature range.

Key Specifications

Number of Channels 1 (Single)
Propagation Delay 40ns typ.
Supply Voltage Range 2.7V to 5.5V
Quiescent Current 40μA typ. per channel
Input Offset Voltage 1mV typ. / 5mV max
Input Bias Current 0.05nA typ. / 50nA max
Input CM Range -0.2V to 5.7V (extends 200mV beyond rails)
Output Type Push-Pull (rail-to-rail)
Output Drive Current ±30mA typ.
Features Internal hysteresis
Package SOT-23-5 (2.9 x 2.8mm)
Operating Temperature -40°C to +125°C

Features

  • Ultra-fast 40ns propagation delay
  • Low 40μA supply current per channel
  • Rail-to-rail input extends 200mV beyond either rail
  • Low offset voltage: 1mV typ.
  • Push-pull output (no pull-up resistor needed)
  • 2.7V to 5.5V supply range
  • Internal hysteresis for clean switching
  • Power-on-reset prevents output glitches during power-up
  • Industrial temperature range: -40°C to +125°C
  • Small SOT-23-5 and SC70-5 packages

Applications

  • High-speed overcurrent detection
  • Zero-cross detection for power conversion
  • PWM output monitoring and fault detection
  • Battery-powered portable threshold detection
  • IR receiver and sensor signal detection
Product Introduction: TLV3201AIDBVR Product Introduction

The TLV3201AIDBVR from Texas Instruments is a single-channel high-speed push-pull comparator that achieves an optimal balance of 40ns propagation delay and only 40μA supply current. The rail-to-rail input stage extends 200mV beyond both supply rails, enabling sensing at ground or supply level without additional level shifting. The push-pull output eliminates the need for an external pull-up resistor. Internal hysteresis ensures clean switching in noisy environments. The device operates from 2.7V to 5.5V across the -40°C to +125°C industrial temperature range, with a power-on-reset circuit that prevents false output transitions during power-up.

Working Principle: TLV3201AIDBVR Working Principle

The TLV3201 uses a CMOS input stage that provides rail-to-rail common-mode range extending 200mV beyond either supply rail. The differential input pair feeds a high-gain comparator core that resolves small voltage differences within 40ns. Internal hysteresis (typically 3-5mV) prevents output chatter when the input signal crosses the threshold slowly or is noisy. The push-pull CMOS output stage actively drives both high and low levels without requiring an external pull-up resistor, providing faster transitions than open-drain comparators. The power-on-reset circuit holds the output low during initial power-up until the supply voltage reaches a valid level, preventing glitching.

Pin Description: TLV3201AIDBVR Pin Definition and Functions
Pin Name Type Function
1 IN+ Input Non-inverting input
2 GND Power Ground / Negative supply
3 IN- Input Inverting input
4 OUT Output Push-pull output
5 VCC Power Positive supply (2.7V to 5.5V)
Application Scenarios: In which products and applications is TLV3201AIDBVR used
  • High-speed overcurrent detection for DC-DC converter protection
  • Zero-cross detection for AC mains monitoring and TRIAC control
  • PWM output monitoring and fault detection in motor drives
  • Battery-powered threshold detection in portable medical devices
  • IR receiver and photodiode signal conditioning
Alternative Models: What chips are recommended as replacements for TLV3201AIDBVR
Manufacturer Part Number Package Notes
TI TLV3202AIDR SOIC-8 Dual version, same performance
TI TLV3201AIDBVT SOT-23-5 Cut tape version
TI TLV3501AIDBVR SOT-23-5 4.5ns ultra-fast comparator
ADI LTC1540CS8-1#PBF SOIC-8 Nanopower 1.3μA comparator
Maxim MAX9015AKA+T SOT-23-5 40ns, 1μA shutdown comparator

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1