Opens in a new tab

MCP4921-E/SN

12-bit single-channel voltage DAC, SPI, rail-to-rail output, 2.7-5.5V, SOIC-8, AEC-Q100

2849

Effective Inventory

Image for reference only

Manufacturer Part:

MCP4921-E/SN

Package:

SOIC-8 (4.9 x 3.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MCP4921-E/SN from Microchip Technology is a 12-Bit Single Output Voltage DAC with SPI interface in an 8-pin SOIC package. It features rail-to-rail output, external voltage reference, and selectable unity or 2x gain output, operating from 2.7V to 5.5V with very low power consumption.

Key Specifications

Resolution 12 Bit
Channels 1
Output Type Voltage, Rail-to-Rail
Settling Time 4.5 μs
INL ±2 LSB typ
DNL ±0.75 LSB max
Supply Voltage 2.7 V to 5.5 V
Operating Current 175 μA typ
Interface SPI (20 MHz)
Package SOIC-8
Temperature Range -40°C to +125°C

Features

  • 12-bit resolution with ±0.2 LSB DNL (typical)
  • Rail-to-rail output with selectable unity or 2x gain
  • SPI interface supporting 20 MHz clock
  • External voltage reference input with multiplier mode
  • Double-buffered input registers with LDAC for synchronous update
  • Very low power consumption: 175 μA typical
  • AEC-Q100 Grade 1 qualified for automotive

Applications

  • Set point or offset trimming
  • Sensor calibration and compensation
  • Motor control feedback loops
  • Portable battery-powered instruments
  • Digitally-controlled multiplier/divider
Product Introduction: MCP4921-E/SN Product Introduction

The MCP4921-E/SN is a single channel 12-bit buffered voltage output Digital-to-Analog Converter (DAC) from Microchip Technology. It uses an external voltage reference pin and SPI interface. The device provides high accuracy and low noise performance suitable for consumer and industrial applications. The resistive string architecture ensures low DNL error and fast settling time. Double-buffered input registers allow synchronous updates using the LDAC pin. The device is AEC-Q100 Grade 1 qualified, making it suitable for automotive applications.

Working Principle: MCP4921-E/SN Working Principle

The MCP4921-E/SN uses a resistive string DAC architecture where the 12-bit digital input code selects a tap point on a resistor divider chain between VREF and ground. The selected voltage is buffered by a rail-to-rail output amplifier with selectable gain of 1x or 2x. Data is written via SPI interface with a 16-bit command word containing configuration bits (gain selection, shutdown control) and the 12-bit DAC code. The LDAC pin allows double-buffered operation for synchronous output updates. An on-chip Power-On Reset (POR) circuit ensures the DAC output starts at a known state.

Pin Description: MCP4921-E/SN Pin Definition and Functions
Pin Name Type Function
1 VDD Power Positive supply voltage (2.7V to 5.5V)
2 CS Input Chip select (active low)
3 SCK Input SPI serial clock input
4 SDI Input SPI serial data input
5 LDAC Input Latch DAC input (active low, synchronous update)
6 VREF Input External voltage reference input
7 VSS Ground Ground
8 VOUT Output DAC analog voltage output
Application Scenarios: In which products and applications is MCP4921-E/SN used
  • Sensor calibration and signal compensation
  • Set point or offset trimming in control loops
  • Motor control feedback and voltage adjustment
  • Portable and battery-powered instrumentation
  • Optical communication device calibration
Alternative Models: What chips are recommended as replacements for MCP4921-E/SN
Manufacturer Part Number Package Notes
Microchip MCP4922-E/SN SOIC-14 Dual channel 12-bit DAC
Microchip MCP4911-E/SN SOIC-8 10-bit version, same footprint
Microchip MCP4821-E/SN SOIC-8 12-bit with internal 2.048V reference
Texas Instruments DAC8562 VSSOP-10 12-bit dual DAC with internal ref

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1