Opens in a new tab

AD202JN

Transformer-coupled isolation amplifier, 750Vrms isolation, 2kHz bandwidth, 10-DIP, with integrated isolated power

14100

Effective Inventory

Image for reference only

Manufacturer Part:

AD202JN

Package:

10-Pin DIP

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The AD202JN from Analog Devices is a general-purpose, two-port, transformer-coupled isolation amplifier designed for applications requiring galvanic isolation between input and output stages. It provides 750Vrms continuous isolation voltage, integrated isolated power outputs, and an uncommitted input amplifier. With a bandwidth of 2kHz and gain non-linearity of ±0.05%, it is housed in a 10-pin DIP package and operates over 0°C to 70°C.

Key Specifications

Category Isolation Amplifier
Isolation Voltage 750 Vrms
Max Common-Mode Voltage 1000V
Number of Amplifiers 1
Bandwidth 2 kHz
Gain Non-Linearity ±0.05%
IMRR 105 dB at 60Hz
Supply Voltage 13.5V to 16.5V
Isolation Type Galvanic, Magnetic (Transformer)
Package 10-Pin DIP
Operating Temperature 0°C ~ 70°C
Part Status Obsolete

Features

  • Transformer-coupled isolation eliminates need for external DC-DC converter
  • Integrated isolated power outputs for input side circuitry
  • Uncommitted input amplifier for flexible gain configuration
  • 105dB isolation-mode rejection ratio at 60Hz
  • 1000V maximum common-mode voltage rating
  • ±0.05% gain non-linearity for precision measurement
  • Through-hole DIP package for easy prototyping

Applications

  • Multichannel data acquisition systems
  • Current shunt measurements
  • Motor control and drive systems
  • Process signal isolation in industrial environments
  • High-voltage instrumentation amplifiers
Product Introduction: AD202JN Product Introduction

The AD202JN is a general-purpose, two-port, transformer-coupled isolation amplifier from Analog Devices. It provides total galvanic isolation between the input and output stages through internal transformer coupling, eliminating the need for an external DC-to-DC converter. This reduces circuit overhead and overall design cost. The device features an uncommitted input amplifier that allows flexible gain configuration, and integrated isolated power outputs that can drive external circuitry on the isolated input side. With an isolation voltage rating of 750Vrms continuous and a maximum common-mode voltage of 1000V, the AD202JN is suitable for demanding industrial and medical applications where patient safety or equipment protection is critical. The device achieves an isolation-mode rejection ratio (IMRR) of 105dB at 60Hz, ensuring excellent rejection of common-mode noise.

Working Principle: AD202JN Working Principle

The AD202JN uses transformer coupling to achieve galvanic isolation between input and output stages. The input signal is amplified by the uncommitted input amplifier and then modulated onto a carrier signal. This modulated signal passes through the isolation transformer to the output stage, where it is demodulated to reconstruct the original signal. An internal oscillator drives the transformer, which also generates isolated power for the input side circuitry, eliminating the need for an external isolated power supply. The transformer barrier provides the galvanic isolation, with the IMRR determined by the transformer’s capacitive coupling between primary and secondary windings.

Pin Description: AD202JN Pin Definition and Functions
Pin Name Type Description
1 +VISO PWR Isolated +7.5V output (input side)
2 -VISO PWR Isolated -7.5V output (input side)
3 HI I Input amplifier non-inverting input
4 LO I Input amplifier inverting input / feedback
5 COM IN GND Input common (isolated)
6 COM OUT GND Output common (non-isolated)
7 VOUT LO O Output low (feedback)
8 VOUT HI O Output high (signal output)
9 +VCC PWR Positive supply (+15V)
10 -VCC PWR Negative supply (-15V)
Application Scenarios: In which products and applications is AD202JN used
  • Medical Instrumentation: ECG/EEG front-end isolation for patient safety
  • Industrial Process Control: 4-20mA loop isolation and sensor signal conditioning
  • Motor Drives: Current sensing via shunt resistor with high-voltage isolation
  • Data Acquisition: Multichannel analog input isolation in test systems
  • Power Monitoring: High-voltage measurement with galvanic isolation
Alternative Models: What chips are recommended as replacements for AD202JN
Model Manufacturer Key Difference
AD202AY Analog Devices Wider temp range, SIP package
AD204JN Analog Devices Higher bandwidth, similar isolation
ISO124P Texas Instruments Capacitive isolation, 60kHz bandwidth
HCPL-7800 Broadcom Optical isolation, 100kHz bandwidth
AMC1301 Texas Instruments Reinforced isolation, capacitive, modern replacement

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1