Opens in a new tab

SN65HVD10DR

3.3V RS-485/RS-422 half-duplex transceiver, 10Mbps, 1/8 unit load (256 nodes), 8-SOIC

13705

Effective Inventory

Image for reference only

Manufacturer Part:

SN65HVD10DR

Package:

8-SOIC (3.9×4.9mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SN65HVD10DR from Texas Instruments is an RS-485/RS-422 transceiver designed for half-duplex communication over balanced transmission lines. With a 1/8 unit load, it supports up to 256 nodes on a single bus. The device operates from a single 3.3V supply, supports data rates up to 10Mbps, and provides robust ESD protection. It is housed in an 8-pin SOIC package.

Key Specifications

Category RS-485/RS-422 Transceiver
Operating Mode Half-Duplex
Supply Voltage 3.3V
Data Rate Up to 10 Mbps
Unit Load 1/8 (256 nodes per bus)
Common-Mode Range -7V ~ 12V
ESD Protection ±16kV HBM on bus pins
Operating Temperature -40°C ~ 85°C
Package 8-SOIC
Part Status Active

Features

  • 3.3V single supply operation
  • 1/8 unit load allows up to 256 nodes on the bus
  • Data rates up to 10Mbps for high-speed applications
  • Extended common-mode range: -7V to 12V
  • ±16kV HBM ESD protection on bus pins
  • Driver and receiver enable pins for flexible control
  • Thermal shutdown and current limiting protection
  • Fail-safe receiver for open-circuit conditions

Applications

  • Industrial automation and process control
  • Building automation and HVAC systems
  • Motor drive and inverter communication
  • Utility metering and smart grid
  • Security and access control systems
Product Introduction: SN65HVD10DR Product Introduction

The SN65HVD10DR is a 3.3V-powered RS-485/RS-422 half-duplex transceiver from Texas Instruments designed for balanced data transmission over long cables. With its 1/8 unit load rating, up to 256 devices can share a single RS-485 bus without exceeding the 32-unit-load limit. The device supports data rates up to 10Mbps, making it suitable for high-speed industrial communication protocols. The extended common-mode range of -7V to 12V provides excellent noise immunity in electrically harsh environments. The driver features thermal shutdown and current-limiting protection against short circuits. The receiver includes a fail-safe feature that ensures a logic-high output when the inputs are open or shorted.

Working Principle: SN65HVD10DR Working Principle

The SN65HVD10DR converts single-ended TTL/CMOS logic signals to differential RS-485/RS-422 signals for noise-immune transmission over balanced twisted-pair cables. The driver takes a single-ended input (D) and produces complementary outputs (A, B) with controlled slew rate. The ¯RE pin enables the receiver, which senses the differential voltage between A and B and outputs the corresponding logic level on R. The DE pin enables the driver. In half-duplex mode, only one device drives the bus at a time. The 1/8 unit load design reduces bus loading, allowing more nodes on the same network. The differential signaling rejects common-mode noise, enabling reliable communication over long cable runs.

Pin Description: SN65HVD10DR Pin Definition and Functions
Pin Name Type Description
1 R O Receiver output
2 ¯RE I Receiver enable (active low)
3 DE I Driver enable (active high)
4 D I Driver input
5 GND GND Ground
6 A I/O Bus non-inverting I/O
7 B I/O Bus inverting I/O
8 VCC PWR Supply voltage (3.3V)
Application Scenarios: In which products and applications is SN65HVD10DR used
  • Modbus RTU: RS-485 transceiver for industrial Modbus communication at up to 10Mbps
  • Motor Control: Inverter-to-encoder communication in servo and stepper drives
  • Smart Metering: Utility meter data collection via RS-485 bus with 256-node capacity
  • Building HVAC: BACnet MS/TP communication for HVAC controllers and sensors
  • Security Systems: Access control and surveillance camera PTZ control over long cable runs
Alternative Models: What chips are recommended as replacements for SN65HVD10DR
Model Manufacturer Key Difference
SN65HVD11DR Texas Instruments Full-duplex version, 14-SOIC
SP3485EN Sipex/Exar 3.3V, half-duplex, 10Mbps, pin-compatible
MAX3485ECSA Analog Devices 3.3V RS-485, 12Mbps, 8-SOIC
THVD1500DR Texas Instruments 5V version, enhanced ESD, pin-compatible
ADM3485EARZ Analog Devices 3.3V, 12Mbps, 8-SOIC, similar specs

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1