Opens in a new tab

MFRC63003HN

NFC frontend IC, ISO 14443A/MIFARE/NTAG, 848kbit/s, SPI/I2C/UART, HVQFN-32, 2.5-5.5V

5650

Effective Inventory

Image for reference only

Manufacturer Part:

MFRC63003HN

Package:

HVQFN-32 (5x5x0.85mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MFRC63003HN from NXP Semiconductors is a high-performance multi-protocol NFC frontend IC for MIFARE and NTAG products. Supporting ISO/IEC 14443A, MIFARE Classic, and NTAG at up to 848kbit/s, it features SPI, I2C, and UART host interfaces, 512-byte FIFO, and low-power card detection. Housed in HVQFN-32 (5x5mm), it operates from 2.5V to 5.5V across -40°C to +105°C.

Key Specifications

Category NFC/RFID Reader IC
Supported Protocols ISO/IEC 14443A, MIFARE Classic, NTAG
Data Rate Up to 848 kbit/s
Operating Frequency 13.56 MHz
Supply Voltage (VDD) 2.5V ~ 5.5V
Supply Current 17 mA (typical)
Power-Down Current 8 nA (typical)
Host Interfaces SPI (up to 10Mbit/s), I2C (up to 1000kbit/s), UART
FIFO Buffer 512 bytes
SAM Connection Dedicated I2C interface
Operating Temperature -40°C ~ +105°C
Package HVQFN-32 (5x5x0.85mm)
Part Status Active (Recommended for new designs)

Features

  • Multi-protocol NFC frontend supporting ISO/IEC 14443A and MIFARE products
  • Up to 848kbit/s bidirectional data rate
  • Low-power card detection (LPCD) with flexible configuration
  • Multiple host interfaces: SPI, I2C (fast+), UART
  • Dedicated I2C for Secure Access Module (SAM) connection
  • 512-byte FIFO for high-throughput data transfer
  • Integrated PLL from 27.12MHz crystal
  • Up to 8 programmable general-purpose I/O pins
  • Enhanced LPCD_OPTIONS register and Load Protocol settings (vs MFRC63002)
  • NXP recommendation for new designs over MFRC63002

Applications

  • Access control and security systems
  • Payment terminals and POS readers
  • Industrial automation and tracking
  • Gaming and vending machines
  • Public transportation ticketing
Product Introduction: MFRC63003HN Product Introduction

The MFRC63003HN from NXP Semiconductors is the recommended version of the MFRC630 family for new designs. It is a high-performance multi-protocol NFC frontend IC that supports ISO/IEC 14443A, MIFARE Classic (1K/4K), MIFARE Ultralight, MIFARE Plus, MIFARE DESFire, and NTAG products at data rates up to 848kbit/s. Compared to the MFRC63002, the MFRC63003 offers a more flexible Low-Power Card Detection (LPCD) configuration via the new LPCD_OPTIONS register and additional Load Protocol settings optimized for smaller antennas. The internal transmitter can drive the reader antenna directly without additional active circuitry. The device supports SPI (up to 10Mbit/s), I2C (up to 1000kbit/s in HS mode), and UART host interfaces, plus a dedicated I2C for SAM connection.

Working Principle: MFRC63003HN Working Principle

The MFRC63003HN operates as a 13.56MHz NFC/RFID reader frontend. The internal transmitter generates the RF carrier at 13.56MHz from a 27.12MHz crystal oscillator via an integrated PLL, and modulates it according to the selected protocol for card communication. The antenna signal is transmitted through the TX1/TX2 output pins. On the receive side, the RXP/RXN differential inputs capture the card’s load-modulated response, which is processed by the analog interface and the contactless UART for protocol handling, CRC generation/verification, and framing. The 512-byte FIFO buffer enables high-throughput data transfer between the host and the contactless UART. The LPCD feature periodically wakes the device from power-down mode to check for card presence, consuming only nanoamps between checks.

Pin Description: MFRC63003HN Pin Definition and Functions
Pin Name Type Description
1 TDO/OUT0 O JTAG test data out / GPIO 0
2 TDI/OUT1 I JTAG test data in / GPIO 1
3 TMS/OUT2 I JTAG TMS / GPIO 2
4 TCK/OUT3 I JTAG TCK / GPIO 3
5 SIGIN/OUT7 I/O Contactless interface / GPIO 7
6 SIGOUT O Contactless communication output
7 DVDD PWR Digital supply buffer (decoupling cap)
8 VDD PWR Main power supply (2.5V-5.5V)
9 AVDD PWR Analog supply buffer
10-11 AUX1/2 O Auxiliary analog test outputs
12-13 RXP/RXN I Receiver differential inputs
14 VMID PWR Internal reference voltage (decoupling cap)
15 TX2 O Transmitter output 2
16 TVSS GND Transmitter ground
17 TX1 O Transmitter output 1
18 TVDD PWR Transmitter supply (2.5V-5.5V)
19-20 XTAL1/2 I/O 27.12MHz crystal oscillator
21 PDOWN I Power down control
22 CLKOUT O Clock output
23-24 SCL/SDA I/O SAM I2C bus
25 PVDD PWR Pad power supply
26-27 IFSEL0/1 I Host interface selection
28-31 IF0-IF3 I/O Host interface pins (SPI/I2C/UART)
32 IRQ O Interrupt request output
33 VSS GND Ground and heatsink
Application Scenarios: In which products and applications is MFRC63003HN used
  • Access Control: Contactless card readers for building and vehicle entry systems
  • Payment Terminals: NFC-enabled POS readers for contactless payment
  • Public Transit: Ticketing readers for buses, trains, and metro systems
  • Industrial Tracking: Asset and inventory management using NFC tags
  • Gaming Machines: NFC card authentication for gaming and vending
Alternative Models: What chips are recommended as replacements for MFRC63003HN
Model Manufacturer Key Difference
MFRC63002HN NXP Previous version, 3V-5.5V only, less LPCD flexibility
MFRC63003HNE NXP Wettable flanks version for automotive
MFRC52202HN NXP Older generation, lower performance
PN5180A0XXC/C01 NXP High-power NFC frontend with dynamic power control
AS3955 AMS/ams-OSRAM NFC Forum Tag type, different architecture

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1