Opens in a new tab

PM4351-RGI

E1/T1 Line Interface Unit, 8.192Mbps, short/long haul, integrated CDR, 80-MQFP, 3.3V

14099

Effective Inventory

Image for reference only

Manufacturer Part:

PM4351-RGI

Package:

80-MQFP (14x14mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The PM4351-RGI from Microchip Technology is a Line Interface Unit (LIU) for E1/T1 telecommunications applications, supporting data rates up to 8.192Mbps. It features short-haul and long-haul operation, integrated clock and data recovery (CDR), and parallel or serial interface. Operating from a 3.3V supply, it is housed in an 80-pin MQFP (14x14mm) package.

Key Specifications

Category Telecom Line Interface Unit
Standards E1 / T1
Max Data Rate 8.192 Mbps
Channels per Chip 1
Haul Type Short / Long Haul
Interface Type Parallel / Serial
Integrated CDR Yes
Internal Matching Impedance Yes
Supply Voltage 3.135V ~ 3.465V (3.3V typical)
Operating Temperature -40°C ~ 85°C
Package 80-MQFP (14x14mm)
Part Status Obsolete

Features

  • Single-channel E1/T1 line interface unit
  • Short-haul and long-haul operation support
  • Integrated clock and data recovery (CDR)
  • Internal impedance matching
  • Parallel and serial microprocessor interface
  • 0.35μm process technology
  • 3.3V single supply operation
  • Standard E1 (2.048Mbps) and T1 (1.544Mbps) framing
  • Diagnostic and performance monitoring features

Applications

  • E1/T1 telecommunications equipment
  • Digital cross-connect systems
  • Channel banks and multiplexers
  • Router and switch line cards
  • Legacy telecom infrastructure
Product Introduction: PM4351-RGI Product Introduction

The PM4351-RGI from Microchip Technology is a single-channel E1/T1 Line Interface Unit (LIU) designed for telecommunications equipment. It supports both short-haul and long-haul operation with integrated clock and data recovery (CDR), eliminating the need for external clock recovery components. The device features internal impedance matching for both E1 (75Ω coaxial / 120Ω twisted pair) and T1 (100Ω twisted pair) line interfaces. The PM4351 provides both parallel and serial microprocessor interface options for flexible system integration. Built on 0.35μm process technology, it operates from a single 3.3V supply and supports data rates up to 8.192Mbps, covering E1 (2.048Mbps), T1 (1.544Mbps), and higher-rate clear-channel applications.

Working Principle: PM4351-RGI Working Principle

The PM4351-RGI interfaces between the digital system backplane and the E1/T1 transmission line. On the receive side, the line receiver amplifier accepts the incoming signal from the line transformer, applies internal impedance matching, and passes it to the CDR circuit which extracts the clock and retimes the data. The framer processes the recovered data according to E1 or T1 framing standards, performing bit and frame alignment, CRC checking, and performance monitoring. On the transmit side, the framer generates the proper framing pattern, and the line driver amplifies the signal to the appropriate level for the line interface. The device supports both short-haul (CSU/DSU) and long-haul (span) configurations with programmable line build-out settings.

Pin Description: PM4351-RGI Pin Definition and Functions
Pin Group Count Description
Line Interface 8 TTIP, TRING, RTIP, RRING (E1/T1 line pairs)
Parallel Data Bus 16 D0-D15 bidirectional data bus
Address/Control 8 A0-A5, RD, WR, CS
Serial Interface 4 SDI, SDO, SCLK, SCS (SPI-like)
System Interface 8 RCLK, TCLK, RFS, TFS, RDATA, TDATA, etc.
Power/Ground 12 VDD (3.3V) and GND
Control/Misc 24 Interrupt, reset, mode select, test pins
Application Scenarios: In which products and applications is PM4351-RGI used
  • Telco Line Cards: E1/T1 interface on router and switch line cards
  • Digital Cross-Connect: Channelized E1/T1 switching in DACS systems
  • Channel Banks: T1-to-analog conversion in PBX interfaces
  • Multiplexers: E1/T1 aggregation in telecom transmission equipment
  • Legacy Infrastructure: Maintenance and replacement of existing E1/T1 systems
Alternative Models: What chips are recommended as replacements for PM4351-RGI
Model Manufacturer Key Difference
PM4352-RGI Microchip Dual-channel version
PM4354-RGI Microchip Quad-channel LIU
DS26528 Maxim/Analog 8-channel LIU, more integrated
XRT82L33 MaxLinear Single E1/T1 LIU, 3.3V
LXT384 Intel/Microchip Quad T1/E1 LIU, older generation

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1