Opens in a new tab

AD5231BRUZ10-REEL7

1024-position nonvolatile digital potentiometer, 10kΩ, SPI, EEMEM, 16-TSSOP, REEL7 packaging

9739

Effective Inventory

Image for reference only

Manufacturer Part:

AD5231BRUZ10-REEL7

Package:

16-TSSOP (5.0×4.4mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The AD5231BRUZ10-REEL7 from Analog Devices is a nonvolatile memory, 1024-position digital potentiometer with 10kΩ terminal resistance. Featuring an SPI-compatible interface, EEMEM for wiper setting storage, and versatile programming with 16 modes of operation, it is housed in a 16-lead TSSOP package and operates over -40°C to +85°C.

Key Specifications

Category Digital Potentiometer
Resolution 1024 positions (10-bit)
Terminal Resistance 10 kΩ
Number of Circuits 1
Memory Type Nonvolatile (EEMEM)
Interface SPI (3-wire compatible)
Supply Voltage 2.7V ~ 5.5V (single) or ±2.25V ~ 2.75V (dual)
EEMEM Restore Time 140 μs (typical)
Data Retention 100 years (typical)
Temperature Coefficient 600 ppm/°C (typical)
Operating Temperature -40°C ~ 85°C
Package 16-TSSOP
Packaging Tape & Reel (REEL7)
Part Status Production

Features

  • 1024-position resolution for precise adjustment
  • Nonvolatile EEMEM maintains wiper setting at power-on
  • EEMEM restore time: 140μs typical
  • Full monotonic operation guaranteed
  • 16 modes of operation via SPI including scratchpad, increment/decrement
  • ±6 dB/step log taper increment/decrement commands
  • Wiper setting readback capability
  • 28 bytes extra EEMEM for user-defined data
  • Permanent memory write protection
  • Linear and logarithmic adjustment modes

Applications

  • Mechanical potentiometer replacement
  • Instrumentation gain and offset adjustment
  • Programmable filters, delays, and time constants
  • Programmable power supplies
  • Sensor calibration and trimming
Product Introduction: AD5231BRUZ10-REEL7 Product Introduction

The AD5231BRUZ10-REEL7 from Analog Devices is a nonvolatile memory, digitally controlled potentiometer (DCP) with 1024-step resolution and 10kΩ terminal resistance. It performs the same electronic adjustment function as a mechanical potentiometer with enhanced resolution, solid-state reliability, and remote controllability. The AD5231 features versatile programming using a standard 3-wire SPI-compatible serial interface supporting 16 modes of operation, including scratchpad programming, EEMEM storing and restoring, linear increment/decrement, ±6 dB/step log taper adjustment, and wiper setting readback. The EEMEM stores the wiper setting and automatically transfers it to the RDAC register at power-on in 140μs. An additional 28 bytes of EEMEM are available for user-defined data such as look-up tables or system identification. The REEL7 suffix indicates Tape & Reel packaging.

Working Principle: AD5231BRUZ10-REEL7 Working Principle

The AD5231 operates as a digitally controlled resistor with three terminals: A, B, and W (wiper). The 1024-position RDAC register controls the wiper position, dividing the total resistance (10kΩ) between W-A and W-B. The SPI interface receives 24-bit command words consisting of an instruction byte and a data byte. The scratchpad register allows direct wiper position programming without affecting EEMEM. The EEMEM stores the desired wiper position permanently and restores it automatically at power-on. Increment/decrement commands move the wiper one step at a time without requiring full SPI data transfers. The ±6 dB commands double or halve the wiper setting for logarithmic adjustment. Write protection (WP) prevents accidental EEMEM modification, while the PR pin allows hardware EEMEM restore.

Pin Description: AD5231BRUZ10-REEL7 Pin Definition and Functions
Pin Name Type Description
1 VDD PWR Positive supply (2.7V-5.5V)
2 GND GND Ground
3 VSS PWR Negative supply (dual supply mode)
4 A Analog Terminal A of resistor
5 W Analog Wiper terminal
6 B Analog Terminal B of resistor
7 RDY O Ready output (EEMEM operation status)
8 WP I Write protect (protects EEMEM)
9 PR I Program restore (hardware EEMEM recall)
10 CS I Chip select (active low)
11 SDI I SPI data input
12 SDO O SPI data output (wiper readback)
13 CLK I SPI clock
14 NC – No connect
15 NC – No connect
16 NC – No connect
Application Scenarios: In which products and applications is AD5231BRUZ10-REEL7 used
  • Gain Adjustment: Remote gain control of op-amp circuits in instrumentation and audio
  • Sensor Calibration: Trim offset and span of sensor signal chains at production or in-field
  • Power Supply: Programmable output voltage adjustment in lab and bench supplies
  • Filter Tuning: Adjustable RC time constants for programmable filters and oscillators
  • LCD Contrast: Nonvolatile contrast adjustment for LCD modules
Alternative Models: What chips are recommended as replacements for AD5231BRUZ10-REEL7
Model Manufacturer Key Difference
AD5231BRUZ50 Analog Devices 50kΩ resistance option
AD5231BRUZ100 Analog Devices 100kΩ resistance option
AD5235BRUZ10 Analog Devices Dual channel, 1024-position, 10kΩ
MCP4161-103E/SN Microchip 7-bit (129 pos), 10kΩ, SPI, 8-SOIC
AD8400ARZ10 Analog Devices 256-position, volatile, 10kΩ, simpler

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1