Opens in a new tab

UC3846N

Dual-ended 500kHz current mode PWM controller, 500mA totem-pole outputs, 50% max duty cycle

8103

Effective Inventory

Image for reference only

Manufacturer Part:

UC3846N

Package:

PDIP-16 (19.3 x 6.35 x 4.57 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The UC3846N from Texas Instruments is a dual-ended current mode PWM controller operating at up to 500 kHz. Housed in a 16-pin PDIP package, it provides all necessary features for fixed-frequency current-mode control schemes with minimal external components. The device features dual totem-pole outputs capable of 500 mA peak, making it suitable for Boost, Flyback, Forward, Half-Bridge, and Push-Pull topologies.

Key Specifications

Topology Boost, Flyback, Forward, Half-Bridge, Push-Pull
Switching Frequency Up to 500 kHz
Max Duty Cycle 50%
Output Peak Current 500 mA (totem-pole)
Supply Voltage Range 7.7 V to 40 V
Reference Voltage 5.1 V (±1%)
Quiescent Current 17 mA
Operating Temperature 0°C to 70°C
Package 16-Pin PDIP

Features

  • Automatic feedforward compensation
  • Programmable pulse-by-pulse current limiting
  • Automatic symmetry correction in push-pull configuration
  • Differential current sense amplifier with wide common mode range
  • Double-pulse suppression
  • Undervoltage lockout (UVLO)
  • Soft-start capability
  • Shutdown terminal with latch-off option

Applications

  • Switch-mode power supplies (SMPS)
  • Push-pull and half-bridge converters
  • Battery charger circuits
  • DC-DC converter modules
  • Industrial power systems
Product Introduction: UC3846N Product Introduction

The UC3846N is a member of the UC1846/7 family of current mode PWM controllers from Texas Instruments. Designed for dual-ended power converter topologies, it integrates a differential current sense amplifier, an error amplifier, an oscillator with synchronization capability, and dual totem-pole output stages. The current mode control architecture provides improved line regulation, enhanced load response, and a simpler control loop design compared to voltage mode control. The device is optimized for push-pull, half-bridge, and bridge converter applications where automatic symmetry correction and pulse-by-pulse current limiting are critical for reliable operation.

Working Principle: UC3846N Working Principle

The UC3846N operates using current mode control where the output inductor current is sensed and used as the feedback variable. The oscillator generates a clock signal that sets the switching frequency (up to 500 kHz). The error amplifier compares a scaled version of the output voltage with the internal 5.1 V reference, producing a control voltage. The current sense amplifier measures the inductor current through a differential input. The PWM comparator compares the current sense signal against the error amplifier output to determine the pulse width. Dual totem-pole outputs alternate based on a flip-flop, driving external power switches in push-pull or bridge configurations. Built-in UVLO ensures the device only operates when the supply voltage exceeds 7.7 V.

Pin Description: UC3846N Pin Definition and Functions
Pin Name Type Function
1 C/S+ Input Current sense non-inverting input
2 C/S- Input Current sense inverting input
3 COMP I/O Error amplifier output / PWM comparator input
4 VREF Output 5.1V reference output
5 RT I/O Oscillator timing resistor
6 CT I/O Oscillator timing capacitor
7 SYNC I/O Oscillator synchronization
8 A OUT Output Output A (totem-pole)
9 GND Power Ground
10 B OUT Output Output B (totem-pole)
11 VC Power Output stage supply voltage
12 VIN Power Input supply voltage
13 SHUTDOWN Input Shutdown control
14 E/A+ Input Error amplifier non-inverting input
15 E/A- Input Error amplifier inverting input
16 SOFT START I/O Soft-start capacitor connection
Application Scenarios: In which products and applications is UC3846N used
  • Push-pull DC-DC converters for telecom power supplies
  • Half-bridge converters for industrial power systems
  • Battery chargers with current limiting requirements
  • Modular power supply systems requiring parallel operation
  • Offline flyback converters with current mode control
Alternative Models: What chips are recommended as replacements for UC3846N
Manufacturer Part Number Package Notes
Texas Instruments UC3846DW SOIC-16 SMD version of UC3846N
Texas Instruments UC3847N PDIP-16 High outputs in OFF state variant
onsemi UC3846N PDIP-16 Pin-compatible equivalent
Texas Instruments UC2846N PDIP-16 Extended temp range (-40 to 85°C)

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1