Opens in a new tab

TL084CDT

Quad JFET-input op amp, 4MHz GBP, 16V/µs slew rate, 200pA bias current, SOIC-14

9834

Effective Inventory

Image for reference only

Manufacturer Part:

TL084CDT

Package:

SOIC-14 (8.75 x 4 x 1.65 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TL084CDT from STMicroelectronics is a quad JFET-input operational amplifier in a 14-pin SOIC package. It features a 4 MHz gain bandwidth product, 16 V/µs slew rate, and low input bias current of 200 pA. The device operates from dual supplies of ±3 V to ±18 V or single supply of 6 V to 36 V, making it suitable for a wide range of general-purpose amplification applications.

Key Specifications

Number of Channels 4
Gain Bandwidth Product 4 MHz
Slew Rate 16 V/µs
Input Offset Voltage 10 mV (max)
Input Bias Current 200 pA
Supply Voltage Range 6 V to 36 V (±3 V to ±18 V)
Supply Current 2.5 mA (total)
Output Current 40 mA per channel
CMRR 86 dB
Operating Temperature 0°C to 70°C
Package SOIC-14

Features

  • High-impedance JFET input stage
  • Low input bias and offset currents
  • Wide common-mode voltage range (up to VCC+)
  • Internal frequency compensation
  • Output short-circuit protection
  • Latch-up free operation
  • High slew rate: 16 V/µs typical

Applications

  • Signal conditioning and filtering
  • Audio preamplifiers and mixers
  • Active filter circuits
  • Instrumentation amplifiers
  • Data acquisition systems
Product Introduction: TL084CDT Product Introduction

The TL084CDT is a high-speed JFET-input quad operational amplifier from STMicroelectronics, fabricated using BiFET technology that combines matched high-voltage JFET and bipolar transistors on a single monolithic chip. Each of the four independent amplifiers features low input bias and offset currents, high input impedance, and a high slew rate of 16 V/µs. The JFET input stage allows the common-mode voltage range to extend up to the positive supply rail, enabling use in single-supply applications. The device is internally frequency compensated for unity-gain stability and includes output short-circuit protection.

Working Principle: TL084CDT Working Principle

Each amplifier channel in the TL084CDT consists of a JFET differential input pair that provides high input impedance and low bias current. The input stage feeds a bipolar gain stage that achieves the 4 MHz gain-bandwidth product. Internal Miller compensation capacitors ensure unity-gain stability without external components. The output stage is a class AB push-pull configuration capable of sourcing or sinking 40 mA with built-in short-circuit current limiting. The four amplifiers share common supply rails but operate independently, allowing each channel to be configured for different functions such as inverting amplification, non-inverting buffering, or active filtering.

Pin Description: TL084CDT Pin Definition and Functions
Pin Name Type Function
1 OUT1 Output Amplifier 1 output
2 IN1- Input Amplifier 1 inverting input
3 IN1+ Input Amplifier 1 non-inverting input
4 VCC+ Power Positive supply voltage
5 IN2+ Input Amplifier 2 non-inverting input
6 IN2- Input Amplifier 2 inverting input
7 OUT2 Output Amplifier 2 output
8 OUT3 Output Amplifier 3 output
9 IN3- Input Amplifier 3 inverting input
10 IN3+ Input Amplifier 3 non-inverting input
11 VCC- Power Negative supply voltage
12 IN4+ Input Amplifier 4 non-inverting input
13 IN4- Input Amplifier 4 inverting input
14 OUT4 Output Amplifier 4 output
Application Scenarios: In which products and applications is TL084CDT used
  • Audio signal processing and active filters
  • Industrial instrumentation and data acquisition
  • Medical monitoring equipment
  • Transducer signal conditioning
  • Analog computation and waveform generation
Alternative Models: What chips are recommended as replacements for TL084CDT
Manufacturer Part Number Package Notes
Texas Instruments TL084CDR SOIC-14 Pin-compatible equivalent
STMicroelectronics TL084CN PDIP-14 Through-hole version
onsemi MC34074D SOIC-14 Similar quad JFET op amp
Texas Instruments TL074CDR SOIC-14 Lower noise JFET quad op amp

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1