Opens in a new tab

STM32F302VDT6

ARM Cortex-M4F MCU, 72MHz, 384KB Flash, 64KB SRAM, dual ADC, 4 comparators, 2 op amps, LQFP-100

12274

Effective Inventory

Image for reference only

Manufacturer Part:

STM32F302VDT6

Package:

LQFP-100 (14 x 14 x 1.4 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The STM32F302VDT6 from STMicroelectronics is an ARM Cortex-M4 microcontroller with FPU operating at 72 MHz. It features 384 KB Flash, 64 KB SRAM, and an LQFP-100 package. The device includes two 5 MSPS 12-bit ADCs, four comparators, two op amps, a 12-bit DAC, and a 144 MHz motor control timer, making it a highly integrated mixed-signal MCU.

Key Specifications

Core ARM Cortex-M4 with FPU
Max Frequency 72 MHz
Flash Memory 384 KB
SRAM 64 KB
GPIOs 86
ADC 2x 12-bit, 5 MSPS (17 channels)
DAC 1x 12-bit
Comparators 4 (25 ns response)
Op Amps 2 (internal, programmable gain)
Supply Voltage 2.0 V to 3.6 V
Operating Temperature -40°C to 85°C
Package LQFP-100 (14 x 14 mm)

Features

  • Single-precision FPU and DSP instructions
  • Four ultra-fast comparators (25 ns)
  • Two internal op amps with programmable gain
  • 144 MHz motor control timer (resolution < 7 ns)
  • FSMC for external memory expansion
  • USB 2.0 full-speed device
  • CAN 2.0B interface
  • Up to 4 SPI and 3 I2C interfaces

Applications

  • Motor control and drive systems
  • Industrial sensor conditioning
  • Power conversion and inverters
  • Consumer appliance controllers
  • Battery management systems
Product Introduction: STM32F302VDT6 Product Introduction

The STM32F302VDT6 is a mixed-signal microcontroller from STMicroelectronics’ STM32F3 series, combining an ARM Cortex-M4 core with FPU and DSP instructions running at 72 MHz with a rich set of integrated analog peripherals. The device includes two 5 MSPS 12-bit ADCs, four fast comparators (25 ns), two internal operational amplifiers with programmable gain, and a 12-bit DAC. This high level of analog integration reduces external component count and simplifies PCB design for mixed-signal applications. The 144 MHz motor control timer provides sub-7 ns resolution for precise PWM generation in motor drive applications.

Working Principle: STM32F302VDT6 Working Principle

The STM32F302VDT6 is built around an ARM Cortex-M4 core with single-precision FPU running at 72 MHz. The internal bus architecture uses a multi-AHB matrix connecting the CPU, DMA, and peripherals. The two ADCs can operate in dual mode for simultaneous sampling or interleaved mode for increased throughput. The four comparators can trigger interrupts or ADC conversions with 25 ns response time. The two internal op amps can be configured with programmable gain (1x to 16x) and routed to GPIO pins, replacing external signal conditioning circuitry. The HRTIM (High Resolution Timer) runs at 144 MHz with sub-7 ns resolution, enabling precise motor control PWM. The FSMC allows connection to external SRAM, NOR, or NAND memories for address space expansion.

Pin Description: STM32F302VDT6 Pin Definition and Functions
Pin Group Function Description
VDD (4 pins) Power 2.0-3.6V digital supply
VSS (4 pins) Ground Digital ground
VDDA Analog Power Analog supply for ADC/DAC/OpAmp
VBAT Backup Power RTC backup domain
PA0-PA15 GPIO/AF Port A – ADC, OpAmp, TIM, USART
PB0-PB15 GPIO/AF Port B – ADC, Comp, SPI, I2C, CAN
PC0-PC15 GPIO/AF Port C – ADC, TIM, FSMC, USART
PD0-PD15 GPIO/AF Port D – FSMC, USART, TIM
PE0-PE15 GPIO/AF Port E – FSMC, TIM, SPI
PH0-PH1 OSC HSE oscillator
Application Scenarios: In which products and applications is STM32F302VDT6 used
  • Three-phase motor drive with sensorless FOC
  • Industrial sensor conditioning with on-chip op amps
  • Power inverter control with HRTIM
  • Battery management with analog front-end
  • Home appliance controllers with CAN connectivity
Alternative Models: What chips are recommended as replacements for STM32F302VDT6
Manufacturer Part Number Package Notes
STMicroelectronics STM32F302VCT6 LQFP-100 256KB Flash version
STMicroelectronics STM32F303VCT6 LQFP-100 More ADCs, 72MHz, 4 op amps
GigaDevice GD32F302VDT6 LQFP-100 Pin-compatible alternative
STMicroelectronics STM32F302VET6 LQFP-100 512KB Flash version

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1