Opens in a new tab

MPX5100DP

Differential pressure sensor, 0-100kPa, 0.2-4.7V output, on-chip conditioned, 5V supply, dual port

8488

Effective Inventory

Image for reference only

Manufacturer Part:

MPX5100DP

Package:

SENSOR4F (17.78 x 29.48 x 10.67 mm, dual side ports)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MPX5100DP from NXP Semiconductors is an integrated silicon differential pressure sensor with on-chip signal conditioning and temperature compensation. It measures differential pressure from 0 to 100 kPa and provides a 0.2 V to 4.7 V analog output at 5 V supply. The sensor features dual side ports and is calibrated over the -40°C to +125°C temperature range.

Key Specifications

Pressure Range 0 to 100 kPa
Pressure Type Differential
Supply Voltage 4.75 V to 5.25 V (5.0 V typ)
Supply Current 7.0 mA (typ)
Full Scale Span 4.0 V (typ)
Sensitivity 40 mV/kPa
Accuracy ±5.0% VFSS (0 to 85°C)
Response Time 1.0 ms (typ)
Operating Temperature -40°C to +125°C
Package SENSOR4F (dual side port)

Features

  • On-chip signal conditioning and amplification
  • Temperature compensated over -40°C to +125°C
  • Patented silicon shear stress strain gauge
  • Durable epoxy unibody construction
  • Ratiometric output to supply voltage
  • Direct microcontroller interface

Applications

  • Industrial process control
  • HVAC systems
  • Medical respiratory monitoring
  • Altitude and barometric pressure
  • Pneumatic control systems
Product Introduction: MPX5100DP Product Introduction

The MPX5100DP is a piezoresistive differential pressure transducer from NXP with fully integrated signal conditioning, temperature compensation, and calibration. Part of the MPX5xxx series, it measures differential pressure up to 100 kPa and provides a high-level analog output directly compatible with microcontroller ADC inputs. The device uses NXP’s patented silicon shear stress strain gauge technology combined with thin-film metallization and bipolar processing for accurate and stable pressure measurement. The dual side port configuration allows measurement of the pressure difference between two independently connected media sources.

Working Principle: MPX5100DP Working Principle

The MPX5100DP uses a silicon diaphragm with implanted piezoresistive elements arranged in a Wheatstone bridge. When differential pressure is applied across the two ports, the diaphragm deflects, creating strain that changes the resistance of the piezoresistors. The resulting bridge imbalance voltage is amplified by the on-chip signal conditioning circuitry, which includes temperature compensation networks that correct for zero offset and span variations across the operating temperature range. The output is a ratiometric voltage proportional to the supply voltage, spanning from approximately 0.2 V at zero pressure to 4.7 V at full scale (100 kPa). This allows direct connection to an ADC with 5 V reference.

Pin Description: MPX5100DP Pin Definition and Functions
Pin Name Type Function
1 VOUT Output Analog voltage output
2 GND Power Ground
3 VS Power 5V supply voltage
4 NC – No connect
Application Scenarios: In which products and applications is MPX5100DP used
  • Industrial process differential pressure monitoring
  • HVAC filter status and air flow measurement
  • Medical CPAP and ventilator systems
  • Barometric altitude measurement Pneumatic actuator position feedback
Alternative Models: What chips are recommended as replacements for MPX5100DP
Manufacturer Part Number Package Notes
NXP MPX5100GP SENSOR4F Gauge pressure version
NXP MPXV5100DP SMT Surface-mount version
NXP MPX5700DP SENSOR4F 0-700 kPa range
Honeywell ASDX100D44R PDIP Digital I2C alternative

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1