Opens in a new tab

MPX5010GP

Gauge pressure sensor, 0-10kPa, 0.2-4.7V output, high sensitivity 450mV/kPa, 5V supply, single port

2620

Effective Inventory

Image for reference only

Manufacturer Part:

MPX5010GP

Package:

SENSOR4F (17.78 x 29.48 x 10.67 mm, single side port)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MPX5010GP from NXP Semiconductors is a low-range gauge pressure sensor measuring 0 to 10 kPa with on-chip signal conditioning and temperature compensation. It provides a 0.2 V to 4.7 V analog output at 5 V supply. The single side port configuration measures pressure relative to atmospheric pressure, ideal for low-pressure sensing in HVAC and medical applications.

Key Specifications

Pressure Range 0 to 10 kPa
Pressure Type Gauge
Supply Voltage 4.75 V to 5.25 V
Full Scale Span 4.5 V (typ)
Sensitivity 450 mV/kPa
Accuracy ±5.0% VFSS (0 to 85°C)
Response Time 1.0 ms (typ)
Operating Temperature -40°C to +125°C
Package SENSOR4F (single side port)

Features

  • Low-range gauge pressure 0-10 kPa
  • On-chip signal conditioning and amplification
  • Temperature compensated over -40°C to +125°C
  • High sensitivity: 450 mV/kPa
  • Ratiometric output to supply voltage
  • Direct microcontroller ADC interface

Applications

  • HVAC air flow measurement
  • Medical respiratory monitoring
  • Building automation
  • Industrial low-pressure sensing
  • Appliance pressure control
Product Introduction: MPX5010GP Product Introduction

The MPX5010GP is the gauge pressure version of NXP’s MPX5010 series, measuring pressure from 0 to 10 kPa (approximately 40 inches of water column) relative to atmospheric pressure. With its high sensitivity of 450 mV/kPa and fully integrated signal conditioning, it is optimized for low-pressure sensing applications where even small pressure changes must be detected. The on-chip temperature compensation ensures ±5% accuracy over 0°C to 85°C, and the ratiometric output allows direct connection to a microcontroller ADC without external amplification. The single side port and atmospheric backside reference make it ideal for duct pressure and air flow measurement.

Working Principle: MPX5010GP Working Principle

The MPX5010GP uses a silicon diaphragm with piezoresistive elements in a Wheatstone bridge configuration. The measured pressure is applied to the top of the diaphragm via the side port, while the backside is vented to atmospheric pressure for gauge reference. Even small pressure differentials (down to fractions of a kPa) deflect the diaphragm and change the piezoresistor values. The resulting bridge output is amplified by the on-chip conditioning circuitry with temperature compensation, producing a ratiometric output voltage. At full scale (10 kPa), the output reaches approximately 4.7 V. The high sensitivity of 450 mV/kPa provides excellent resolution for low-pressure measurements such as HVAC air flow and medical respiratory monitoring.

Pin Description: MPX5010GP Pin Definition and Functions
Pin Name Type Function
1 VOUT Output Analog voltage output
2 GND Power Ground
3 VS Power 5V supply voltage
4 NC – No connect
Application Scenarios: In which products and applications is MPX5010GP used
  • HVAC variable air volume (VAV) duct pressure
  • Medical CPAP and BiPAP pressure monitoring
  • Clean room positive/negative pressure control
  • Industrial fume hood exhaust monitoring
  • Smart building air quality systems
Alternative Models: What chips are recommended as replacements for MPX5010GP
Manufacturer Part Number Package Notes
NXP MPX5010DP SENSOR4F Differential version
NXP MPX5100GP SENSOR4F 0-100 kPa higher range
NXP MPXV5010GP SMT Surface-mount gauge version
Sensirion SDP810-500PA SMD Digital I2C differential pressure

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1