Opens in a new tab

TPA0211DGNR

2W mono Class-AB audio amp, BTL/SE, 2.5-5.5V, HVSSOP-8 PowerPAD

9105

Effective Inventory

Image for reference only

Manufacturer Part:

TPA0211DGNR

Package:

HVSSOP-8 (DGN) with PowerPAD (4.9 x 3.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPA0211DGNR is a 2-W mono bridge-tied-load (BTL) Class-AB audio power amplifier from Texas Instruments. Capable of delivering 2W into a 4-Ohm speaker from a 5V supply, it features both BTL and single-ended (SE) modes, shutdown control, and a compact HVSSOP-8 (PowerPAD) package for thermally enhanced operation.

Key Specifications

Output Power (5V, 4 Ohm, BTL) 2 W
Output Power (3V, 4 Ohm, BTL) 0.6 W
Supply Voltage Range 2.5V to 5.5V
Quiescent Current 4 mA typical
Shutdown Current 1 uA typical
SNR 93 dB
THD+N at 1 kHz 0.2%
Package HVSSOP-8 (DGN) with PowerPAD

Features

  • 2W into 4 Ohm from 5V supply
  • BTL and SE mode operation
  • Wide supply voltage: 2.5V to 5.5V
  • TTL-compatible shutdown pin
  • Thermally-enhanced MSOP-PowerPAD package

Applications

  • Wireless communicators and PDAs
  • Notebook PC speakers
  • Portable audio devices
  • Consumer electronics
Product Introduction: TPA0211DGNR Product Introduction

The TPA0211DGNR from Texas Instruments is a 2-W mono bridge-tied-load (BTL) Class-AB audio power amplifier designed to drive speakers with as low as 4-Ohm impedance. It operates from a 2.5V to 5.5V supply, delivering 2W into 4 Ohm at 5V or 0.6W at 3V. The amplifier supports both BTL mode for speaker driving and single-ended mode for headphone output, making it ideal for portable devices requiring both speaker and earphone capability. The integrated depop circuit eliminates audible clicks during power transitions.

Working Principle: TPA0211DGNR Working Principle

The TPA0211 consists of an input stage with user-configurable gain and a power output stage. The gain is set by an external input resistor and an internal 50 kOhm feedback resistor. The power stage is internally configured with a gain of -1.25 V/V in SE mode and -2.5 V/V in BTL mode. In BTL mode, two amplifiers drive the speaker differentially, doubling the voltage swing across the load and providing four times the output power compared to SE mode. The shutdown pin disables the amplifier for power savings with only 1 uA quiescent current.

Pin Description: TPA0211DGNR Pin Definition and Functions
Pin Name Type Function
1 VO+ (BTL+) Output Positive speaker output (BTL mode)
2 GND Ground Ground reference
3 SHUTDOWN Input Shutdown control (active high, TTL)
4 BYPASS Passive Internal mid-supply bypass (connect cap)
5 IN Input Audio input (high-impedance CMOS)
6 SE/BTL Input Mode select (high=SE, low=BTL)
7 VDD Power Supply voltage 2.5-5.5V
8 VO- (BTL-) Output Negative speaker output (BTL mode)
Application Scenarios: In which products and applications is TPA0211DGNR used
  • Wireless communicator and PDA audio
  • Notebook and laptop PC speaker drivers
  • Portable consumer audio devices
  • Small embedded system audio output
  • Hands-free communication devices
Alternative Models: What chips are recommended as replacements for TPA0211DGNR
Manufacturer Part Number Package Notes
TI TPA0211DGNG4 HVSSOP-8 Tube packaging variant
TI TPA6211A1DGNR HVSSOP-8 Pin-compatible upgrade
TI TPA4860D SOIC-8 Higher SE output power
NXP TPA2000D2 QFN-24 Class-D alternative, higher efficiency
Maxim MAX98306ETD+ QFN-14 Dual Class-D, filterless

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1