Opens in a new tab

MC3486DR

Quad differential line receiver, EIA-422/423, 3-state TTL outputs, 5V, SOIC-16

9589

Effective Inventory

Image for reference only

Manufacturer Part:

MC3486DR

Package:

SOIC-16 (9.9 x 6.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MC3486DR is a monolithic quadruple differential line receiver from Texas Instruments designed to meet ANSI standards EIA/TIA-422-B and EIA/TIA-423-B and ITU Recommendations V.10 and V.11. It features four independent differential-input receivers with 3-state TTL-compatible outputs, operating from a single 5V supply in a 16-pin SOIC package for commercial temperature range (0 to 70C).

Key Specifications

Number of Receivers 4
Standards EIA/TIA-422-B, EIA/TIA-423-B, ITU V.10/V.11
Supply Voltage 5V single supply
Output Type 3-state TTL-compatible
Common-Mode Range +/-7V
Input Resistance 12 kOhm typical
Package SOIC-16 (9.9 x 6.0 mm)
Operating Temperature 0C to +70C

Features

  • Meets or exceeds EIA/TIA-422-B and EIA/TIA-423-B standards
  • 3-state TTL-compatible outputs
  • Fast transition times
  • Operates from single 5V supply
  • Designed to be interchangeable with Motorola MC3486

Applications

  • Motor drive and control communication
  • Factory automation and control
  • Differential data bus receiving
  • Long-distance digital signal transmission
Product Introduction: MC3486DR Product Introduction

The MC3486DR from Texas Instruments is a monolithic quadruple differential line receiver designed to meet or exceed the requirements of ANSI standards EIA/TIA-422-B and EIA/TIA-423-B and ITU Recommendations V.10 and V.11. It provides four independent differential-input line receivers with TTL-compatible 3-state outputs. The 3-state outputs allow direct connection to bus-oriented systems. Designed to operate from a single 5V supply, the MC3486DR is optimized for use with the MC3487 quadruple differential line driver for complete differential data transmission systems.

Working Principle: MC3486DR Working Principle

The MC3486DR contains four independent differential line receivers. Each receiver compares the voltage difference between its non-inverting (A) and inverting (B) inputs. If the differential voltage exceeds the positive threshold (typically 200 mV), the output goes to a TTL high level; if below the negative threshold, the output goes low. The wide common-mode input range of +/-7V allows the device to reject common-mode noise picked up on long cable runs. Each pair of receivers shares an active-low output enable (EN) that forces the outputs to a high-impedance state when asserted, enabling bus sharing with other devices.

Pin Description: MC3486DR Pin Definition and Functions
Pin Name Type Function
1 1A Input Receiver 1 non-inverting input
2 1B Input Receiver 1 inverting input
3 EN1 Input Output enable for receivers 1 & 2 (active low)
4 1Y Output Receiver 1 output
5 2Y Output Receiver 2 output
6 2A Input Receiver 2 non-inverting input
7 2B Input Receiver 2 inverting input
8 GND Ground Ground reference
9 3A Input Receiver 3 non-inverting input
10 3B Input Receiver 3 inverting input
11 4Y Output Receiver 4 output
12 EN2 Input Output enable for receivers 3 & 4 (active low)
13 3Y Output Receiver 3 output
14 4A Input Receiver 4 non-inverting input
15 4B Input Receiver 4 inverting input
16 VCC Power 5V supply
Application Scenarios: In which products and applications is MC3486DR used
  • Motor drive and industrial control communication links
  • Factory automation differential bus receivers
  • Long-distance digital signal transmission over twisted pair
  • RS-422/RS-423 communication interface
  • Multi-drop data acquisition systems
Alternative Models: What chips are recommended as replacements for MC3486DR
Manufacturer Part Number Package Notes
TI MC3486N PDIP-16 Through-hole version
TI MC3486NSR SOP-16 Shrink SOP package
TI SN65ALS176A SOIC-8 Single RS-485 transceiver alternative
TI DS26LS32ACM SOIC-16 Quad differential receiver, enhanced
Maxim MAX3095CSE+ SOIC-16 Quad RS-485/422 receiver

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1