Opens in a new tab

BQ24192IRGER

I2C 4.5A 1-cell Li-ion charger, NVDC power path, USB OTG, VQFN-24

4182

Effective Inventory

Image for reference only

Manufacturer Part:

BQ24192IRGER

Package:

VQFN-24 (4.0 x 4.0 x 0.75 mm, with thermal pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The BQ24192IRGER from Texas Instruments is an I2C controlled 4.5A single-cell switch-mode battery charger with Narrow VDC (NVDC) power path management and USB OTG boost capability. Designed for Li-Ion/Li-Polymer batteries, it integrates synchronous MOSFETs, current sensing, and supports input voltages from 3.9V to 17V in a 24-pin VQFN package.

Key Specifications

Charge Current (max) 4.5 A
Cell Configuration 1-cell Li-Ion/Li-Polymer
Input Voltage Range 3.9V to 17V
Interface I2C
Switching Frequency 1.5 MHz
Battery Discharge MOSFET RDS(on) 12 mOhm typical
Charge Accuracy +/-0.5% voltage, +/-7% current
USB OTG Boost 5V at 1.3 A (93% efficiency at 1A)
Package VQFN-24 (4.0 x 4.0 mm)
Operating Temperature -40C to +85C

Features

  • Narrow VDC power path: instant-on with no/depleted battery
  • High efficiency: 92% at 2A, 90% at 4A charge current
  • I2C interface with full register control
  • USB BC1.2 compliant input detection
  • USB OTG boost: 5V/1.3A synchronous boost converter
  • Comprehensive safety: thermal regulation, OVP, OCP, NTC monitoring

Applications

  • Tablets and smartphones
  • Portable media players and speakers
  • Industrial handheld devices
  • 4G LTE routers and IoT gateways
Product Introduction: BQ24192IRGER Product Introduction

The BQ24192IRGER from Texas Instruments is a highly integrated I2C-controlled 4.5A switch-mode battery charger for single-cell Li-Ion and Li-Polymer batteries. It features Narrow VDC (NVDC) power path management that allows the system to power on instantly even without a battery or with a deeply discharged battery. The device integrates synchronous buck MOSFETs, current sensing, bootstrap diode, and internal loop compensation for a compact solution. The USB OTG boost converter can deliver 5V at up to 1.3A from the battery, supporting USB peripheral functionality. Charge voltage accuracy of +/-0.5% and current accuracy of +/-7% ensure safe and reliable battery charging.

Working Principle: BQ24192IRGER Working Principle

The BQ24192IRGER operates as a synchronous buck converter for charging and a synchronous boost converter for OTG mode. In charging mode, it steps down the input voltage to the battery voltage using integrated N-channel MOSFETs at 1.5 MHz switching frequency. The NVDC power path regulates the system voltage slightly above the battery voltage but not below a programmable minimum (3.5V), ensuring system operation even with a depleted battery. If the system load exceeds the input source capability, the battery supplements power through the low RDS(on) discharge MOSFET (12 mOhm). Charging follows three phases: pre-conditioning (for deeply discharged cells), constant current (CC), and constant voltage (CV) with automatic termination. The I2C interface provides control over charge voltage, charge current, input current limit, and OTG boost settings.

Pin Description: BQ24192IRGER Pin Definition and Functions
Pin Name Type Function
1 VBUS Power Input supply from USB or adapter
2,3 PMID Power Power mid-point (buck/boost switch node)
4,5 SW Power Switching node (to inductor)
6 BTST Power Bootstrap capacitor connection
7 REGN Power Internal 6V LDO output
8,9,10 CS/SR/SGND Analog Current sense resistor connections
11 SDA I/O I2C data
12 SCL Input I2C clock
13 OTG I/O OTG mode enable/boost output
14 INT Output Interrupt output (active low)
15 STAT Output Charge status output
16 PG Output Power good indicator
17 CE Input Charge enable (active low)
18 TS Analog NTC thermistor input
Application Scenarios: In which products and applications is BQ24192IRGER used
  • Tablet PC and smartphone battery charging systems
  • Portable audio speakers and media players
  • 4G LTE routers and Wi-Fi hotspot devices
  • Industrial handheld instruments with USB power
  • Power bank and portable charger designs
Alternative Models: What chips are recommended as replacements for BQ24192IRGER
Manufacturer Part Number Package Notes
TI BQ24190RGER VQFN-24 With D+/D- USB detection
TI BQ24192IRGER VQFN-24 Industrial temp variant
TI BQ24195RGER VQFN-24 Higher boost current (2.1A)
TI BQ25895RGER VQFN-24 Newer generation, 5A, USB PD
TI BQ25890RGER VQFN-24 5A charger, no boost

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1