Opens in a new tab

NCP1253BSN100T1G

100 kHz current-mode PWM controller for offline flyback converters with auto-recovery OCP, TSOP-6

8240

Effective Inventory

Image for reference only

Manufacturer Part:

NCP1253BSN100T1G

Package:

TSOP-6 (SOT-23-6 Thin, 2.9 x 1.6 x 1.1 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The NCP1253BSN100T1G from onsemi is a highly integrated current-mode PWM controller designed for offline power supply applications. Housed in a compact TSOP-6 package, it operates with a fixed 100 kHz switching frequency and features auto-recovery short-circuit protection. The controller supports a supply voltage range up to 28 V and includes frequency foldback down to 26 kHz for improved light-load efficiency.

Key Specifications

Switching Frequency 100 kHz
Supply Voltage (VCC) 8.8 V to 28 V
Topology Flyback (Current Mode)
OCP Type Auto-Recovery
Soft Start 4 ms (Internal)
Max Duty Cycle 80%
Operating Temperature -40°C to 125°C (TJ)

Features

  • Fixed-frequency 100 kHz current-mode control operation
  • Frequency foldback down to 26 kHz and skip-cycle in light load
  • Adjustable ramp compensation via external resistor
  • Timer-based auto-recovery short-circuit protection
  • Latched over-voltage protection on VCC pin
  • Frequency jittering for reduced EMI
  • Internally fixed 4 ms soft-start
  • Extremely low no-load standby power

Applications

  • AC-DC converters for TVs, set-top boxes, and printers
  • Offline adapters for notebooks and netbooks
  • Auxiliary power supplies in server and industrial systems
  • Battery charger power stages
Product Introduction: NCP1253BSN100T1G Product Introduction

The NCP1253BSN100T1G is a peak current-mode PWM controller from onsemi, specifically designed for offline flyback converter topologies. Operating at a fixed switching frequency of 100 kHz, this device integrates all essential control functions in a tiny TSOP-6 package. It features frequency foldback that reduces the switching frequency to 26 kHz under light-load conditions and enters skip-cycle mode for extremely low standby power consumption. The controller includes adjustable slope compensation via an external resistor on the current sense pin, preventing sub-harmonic oscillation in continuous conduction mode. A timer-based auto-recovery short-circuit protection mechanism safeguards the converter during fault conditions, while a latched over-voltage protection on the VCC pin protects against optocoupler failure or open-loop operation. The internal 4 ms soft-start ensures controlled startup without output overshoot. Frequency jittering in both normal and foldback modes reduces EMI filter requirements.

Working Principle: NCP1253BSN100T1G Working Principle

The NCP1253BSN100T1G operates as a peak current-mode controller with three key subsystems: (1) The oscillator and jitter block generates the 100 kHz clock with low-frequency modulation for EMI reduction. The frequency foldback circuit reduces the switching frequency to 26 kHz when the FB pin voltage drops below a threshold, and further enters skip-cycle mode at very light loads to minimize standby power. (2) The current sense and slope compensation subsystem monitors the primary peak current through the CS pin. An external resistor in series with the sense resistor introduces slope compensation to prevent sub-harmonic oscillation in CCM operation. The leading edge blanking (LEB) suppresses turn-on spikes. (3) The protection subsystem includes a timer-based OCP that counts fault events and auto-recovers after a cool-down period, and a VCC OVP comparator that latches the converter off when VCC exceeds the threshold, protecting against output overvoltage due to optocoupler destruction.

Pin Description: NCP1253BSN100T1G Pin Definition and Functions
Pin No. Pin Name Function
1 GND Controller ground reference
2 FB Feedback input; connect optocoupler collector for regulation
3 NC Not connected; may be grounded if needed
4 CS Current sense input with ramp compensation; monitors primary peak current
5 VCC IC supply voltage; OVP comparator monitors this pin
6 DRV Gate driver output for external MOSFET
Application Scenarios: In which products and applications is NCP1253BSN100T1G used
  • AC-DC flyback converters for consumer electronics (TVs, set-top boxes, printers) requiring compact design with 100 kHz switching
  • Offline power adapters for notebooks with auto-recovery protection and low standby power under 100 mW
  • Industrial auxiliary power supplies needing robust OVP and OCP protection in a 6-pin footprint
  • Battery charger front-end stages where frequency jittering simplifies EMI compliance
Alternative Models: What chips are recommended as replacements for NCP1253BSN100T1G
Model Brand Frequency OCP Type Package
NCP1253ASN100T1G onsemi 100 kHz Latched TSOP-6
NCP1253BSN65T1G onsemi 65 kHz Auto-Recovery TSOP-6
NCP12510BSN100T1G onsemi 100 kHz Auto-Recovery TSOP-6
NCP1234BD65R2G onsemi 65 kHz Latched SOIC-7
UC3843B Texas Instruments Up to 500 kHz Cycle-by-Cycle DIP-8/SOIC-8

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1