Opens in a new tab

TPS92692QPWPRQ1

Automotive LED controller, 4.5-65 V, spread spectrum, analog/PWM dimming, AEC-Q100, HTSSOP-20

7350

Effective Inventory

Image for reference only

Manufacturer Part:

TPS92692QPWPRQ1

Package:

HTSSOP-20 (5.10 x 6.60 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS92692QPWPRQ1 from Texas Instruments is an automotive AEC-Q100 Grade 1 qualified high-accuracy LED controller with spread spectrum frequency modulation. It supports step-up/down LED driver topologies with an input voltage range of 4.5 V to 65 V, featuring both analog and PWM dimming with internal PWM generator. The device is packaged in a 20-pin HTSSOP.

Key Specifications

Input Voltage Range 4.5 V to 65 V
LED Current Accuracy Better than +/-4%
Switching Frequency 80 kHz to 800 kHz
Dimming Range (PWM) >1000:1
Analog Dimming Range >15:1
Topology Boost, Buck-Boost
Qualification AEC-Q100 Grade 1
Operating Temperature -40°C to 125°C

Features

  • Wide input voltage range: 4.5 V to 65 V
  • Better than +/-4% LED current accuracy over -40°C to 150°C junction temperature
  • Spread spectrum frequency modulation for improved EMI
  • Internal analog voltage to PWM duty cycle generator
  • Direct PWM input with over 1000:1 dimming range
  • Analog LED current adjust (IADJ) with over 15:1 contrast ratio
  • Integrated P-channel driver for series FET dimming
  • Current monitor output and open-drain fault flag

Applications

  • Automotive exterior lighting (headlights, DRL, fog lights)
  • Driver monitoring systems (DMS)
  • LED general lighting and exit signs
  • Emergency and architectural lighting
Product Introduction: TPS92692QPWPRQ1 Product Introduction

The TPS92692QPWPRQ1 is a high-accuracy peak current-mode LED controller from Texas Instruments, qualified to AEC-Q100 Grade 1 for automotive applications. It supports boost and buck-boost LED driver topologies with a wide input voltage range of 4.5 V to 65 V, making it suitable for automotive battery-powered lighting systems. The device incorporates a rail-to-rail current sense amplifier for precise LED current measurement with better than +/-4% accuracy across the full junction temperature range of -40°C to 150°C. Spread spectrum frequency modulation reduces EMI, simplifying filter design. The controller offers dual dimming capability: analog dimming via the IADJ input with over 15:1 contrast ratio, and PWM dimming through the DIM/PWM pin with over 1000:1 range. An internal PWM generator converts a DC voltage at the DIM/PWM pin to a corresponding duty cycle, enabling standalone dimming without an external PWM source.

Working Principle: TPS92692QPWPRQ1 Working Principle

The TPS92692QPWPRQ1 operates through five key subsystems: (1) The oscillator and spread spectrum block generates the switching frequency (adjustable 80-800 kHz) with frequency dithering to spread EMI energy and reduce peak emissions. (2) The peak current-mode control loop uses a transconductance error amplifier and current sense comparator to regulate the LED current. The COMP pin allows external compensation for loop stability. (3) The dimming subsystem supports two modes: analog dimming via the IADJ pin which scales the current reference, and PWM dimming via the DIM/PWM pin which chops the LED current at the desired duty cycle. The internal PWM generator creates a PWM signal from a DC voltage. (4) The PDRV gate driver output controls an external P-channel series MOSFET for fast LED current on/off during PWM dimming, improving dimming linearity at low duty cycles. (5) The protection and monitoring block includes output overvoltage protection, output short-circuit protection with hiccup mode, thermal shutdown, and a current monitor (IMON) output with fault flag (FLT) indicator.

Pin Description: TPS92692QPWPRQ1 Pin Definition and Functions
Pin No. Pin Name Function
1 VIN Input supply voltage
2 VREF Internal reference voltage output
3 IADJ Analog LED current adjust input
4 SS Soft-start capacitor connection
5 DM Dither modulation frequency set resistor
6 RT Switching frequency set resistor
7 DIM/PWM PWM dimming input / internal PWM generator
8 COMP Error amplifier output for compensation
9 IS Current sense amplifier inverting input
10 PDRV P-channel MOSFET gate driver output
11 RAMP Slope compensation capacitor
12 GATE Main N-channel MOSFET gate driver output
13 CSN Current sense negative input (switch current)
14 CSP Current sense positive input (LED current)
15 OV Output overvoltage protection input
16 SLOPE Slope compensation resistor
17 GND Device ground
18 IMON Current monitor output
19 FLT Fault flag output (open drain)
20-21 NC/PAD Not connected / Thermal pad
Application Scenarios: In which products and applications is TPS92692QPWPRQ1 used
  • Automotive front lighting (LED headlights, DRL) requiring AEC-Q100 Grade 1 qualification with analog and PWM dimming
  • Driver monitoring system (DMS) infrared LED drivers needing precise current control over wide temperature range
  • Industrial LED lighting with buck-boost topology for battery-powered applications from 12 V to 48 V
  • Emergency vehicle lighting systems requiring spread spectrum for EMI compliance in RF-sensitive environments
Alternative Models: What chips are recommended as replacements for TPS92692QPWPRQ1
Model Brand Vin Range Dimming Qualification
TPS92692PWPR TI 4.5-65 V Analog + PWM Catalog
LM3492QMH TI 6-65 V PWM AEC-Q100
AL8862Q Diodes Inc 4.5-40 V PWM/Analog AEC-Q100
BD18347EFV-M Rohm 4.5-36 V PWM AEC-Q100
MAX20078ATC/VY+ ADI 5-65 V Analog + PWM AEC-Q100

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1