Opens in a new tab

TSAL6100

940 nm high-power IR LED, 130 mW/sr, +/-10 deg, T-1 3/4 through-hole, GaAlAs/GaAs

6200

Effective Inventory

Image for reference only

Manufacturer Part:

TSAL6100

Package:

T-1 3/4 (5 mm, Radial, Through-Hole)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TSAL6100 from Vishay Semiconductors is a high power infrared emitting diode in GaAlAs/GaAs technology with a peak wavelength of 940 nm. Packaged in a T-1 3/4 (5 mm) through-hole package, it delivers high radiant intensity of 130 mW/sr typical at 100 mA with a narrow +/-10 degree half-angle for directed IR transmission.

Key Specifications

Peak Wavelength 940 nm
Radiant Intensity 130 mW/sr typical @ 100 mA
Radiant Power 35 mW typical @ 100 mA
Forward Voltage 1.35 V typical, 1.6 V max @ 100 mA
Half Intensity Angle +/-10 degrees
Max Forward Current 100 mA (continuous)
Rise/Fall Time 800 ns
Operating Temperature -40°C to 85°C

Features

  • High radiant power and radiant intensity for extended range
  • Peak wavelength 940 nm for minimal visible glow
  • Narrow +/-10 degree emission angle for directed transmission
  • Low forward voltage (1.35 V typical)
  • Suitable for high pulse current operation (up to 1.5 A surge)
  • Good spectral matching with Si photodetectors
  • Halogen-free per IEC 61249-2-21
  • RoHS compliant

Applications

  • IR remote controls for high power requirements
  • Free air transmission systems and light barriers
  • Optical counters and card readers
  • IR source for smoke detectors
Product Introduction: TSAL6100 Product Introduction

The TSAL6100 is a high-power infrared emitting diode from Vishay Semiconductors, fabricated in GaAlAs/GaAs multi-quantum-well (MQW) technology. It emits at a peak wavelength of 940 nm, which is nearly invisible to the human eye, making it ideal for remote control and free-space optical communication applications. The device delivers a typical radiant intensity of 130 mW/sr at 100 mA forward current, with a total radiant power of 35 mW. The narrow emission angle of +/-10 degrees concentrates the infrared energy for extended-range directed transmission. The T-1 3/4 (5 mm diameter) through-hole package provides reliable mechanical mounting and excellent optical characteristics. The low forward voltage of 1.35 V at 100 mA enables efficient operation from low-voltage supplies. The TSAL6100 also supports high pulse current operation up to 1.5 A for short durations, making it suitable for high-power burst-mode IR transmission protocols.

Working Principle: TSAL6100 Working Principle

The TSAL6100 operates as a forward-biased pn junction in GaAlAs/GaAs semiconductor material: (1) When current flows through the junction in the forward direction, electrons recombine with holes in the active region. In GaAlAs/GaAs MQW structures, this recombination releases energy as photons at a wavelength determined by the bandgap of the active layer, which is 940 nm for this device. (2) The photon emission is isotropic from the junction, but the molded lens of the T-1 3/4 package focuses the emission into a narrow beam with a half-intensity angle of +/-10 degrees, concentrating the radiant intensity to 130 mW/sr. (3) The radiant power is proportional to the forward current, allowing the device to be modulated by varying the drive current. At high pulse currents (up to 1.5 A), the radiant intensity increases to approximately 650 mW/sr, enabling long-range transmission. The rise and fall times of 800 ns support modulation frequencies up to several hundred kHz for standard IR remote control protocols.

Pin Description: TSAL6100 Pin Definition and Functions
Pin No. Pin Name Function
1 Anode Positive terminal; connect to supply through current-limiting resistor
2 Cathode Negative terminal; connect to ground or driver transistor collector
Application Scenarios: In which products and applications is TSAL6100 used
  • IR remote control units for consumer electronics (TVs, air conditioners) requiring extended operating range with narrow beam
  • Free-space optical transmission systems and IR light barriers for object detection and counting
  • Smoke detector IR sources where high radiant power and 940 nm wavelength ensure reliable particle detection
  • Optical card readers and encoders using directed IR beams for position sensing
Alternative Models: What chips are recommended as replacements for TSAL6100
Model Brand Wavelength Intensity Angle
TSAL6400 Vishay 940 nm 40 mW/sr +/-30 deg
TSHF6410 Vishay 870 nm 80 mW/sr +/-20 deg
SFH 4550 ams-OSRAM 860 nm 700 mW/sr +/-3 deg
VSLB3940 Vishay 940 nm 50 mW/sr +/-20 deg
TSAL6200 Vishay 940 nm 35 mW/sr +/-17 deg

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1