Opens in a new tab

Home » Integrated Circuits ICs, Sensors » LT4363IMS-2#TRPBF

LT4363IMS-2#TRPBF

High-voltage surge stopper, 4-80 V, current limit, auto-retry (-2), MSOP-12

3200

Effective Inventory

Image for reference only

Manufacturer Part:

LT4363IMS-2#TRPBF

Package:

MSOP-12 (4.04 x 3.00 mm, with exposed pad)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LT4363IMS-2#TRPBF from Analog Devices (formerly Linear Technology) is a high voltage surge stopper with current limit that protects loads from high voltage transients. It regulates the output during overvoltage events by controlling an external N-channel MOSFET, with an operating range of 4 V to 80 V. The -2 variant features automatic retry after cool-down, in a 12-lead MSOP package.

Key Specifications

Operating Voltage Range 4 V to 80 V
Reverse Input Protection -60 V
Overcurrent Response < 5 us
Current Sense Voltage 50 mV
Shutdown Current 7 uA
Fault Timer Adjustable (external capacitor)
UV/OV Thresholds 1.275 V (adjustable via divider)
Operating Temperature -40°C to 85°C

Features

  • Withstands surges over 80 V with VCC clamp
  • Adjustable output clamp voltage
  • Fast overcurrent limit: less than 5 us
  • Reverse input protection to -60 V
  • Adjustable UV/OV comparator thresholds
  • Low 7 uA shutdown current
  • Adjustable fault timer with FLT warning output
  • LT4363-2 auto-retry with <1% duty cycle during faults

Applications

  • Automotive/avionic/industrial surge protection
  • Hot swap and live insertion
  • High-side switch for battery systems
  • Intrinsic safety applications
Product Introduction: LT4363IMS-2#TRPBF Product Introduction

The LT4363IMS-2#TRPBF from Analog Devices is a high-voltage surge stopper that protects sensitive loads from voltage transients such as automotive load dump events. It operates by controlling the gate of an external N-channel MOSFET to regulate the output voltage during overvoltage conditions, allowing loads to continue functioning at a safe, clamped voltage level. The device also provides overcurrent protection by monitoring the voltage drop across a sense resistor between the SNS and OUT pins, limiting the sense voltage to 50 mV. When a fault condition is detected, an adjustable timer starts; the FLT pin pulls low to warn of an impending shutdown, and if the condition persists, the MOSFET is turned off. The LT4363-2 variant automatically retries after a cool-down period with less than 1% retry duty cycle, making it suitable for applications requiring autonomous recovery. Two precision comparators monitor for undervoltage (UV) and overvoltage (OV) conditions on the input supply.

Working Principle: LT4363IMS-2#TRPBF Working Principle

The LT4363IMS-2#TRPBF operates through four functional subsystems: (1) The gate driver uses an internal charge pump to drive the external N-channel MOSFET gate approximately 13 V above the OUT pin, with a 14 V protection clamp. During normal operation, the MOSFET is fully enhanced. (2) The overvoltage clamp monitors the output voltage through the FB pin. When the voltage at FB exceeds 1.275 V, the gate voltage is reduced to regulate the output at the clamp level, protecting downstream loads while keeping them operational. (3) The overcurrent protection limits the voltage across the sense resistor (SNS to OUT) to 50 mV by reducing the MOSFET gate drive. Under severe faults (OUT below 2 V), the limit reduces to 25 mV. The fault timer at the TMR pin charges proportionally to MOSFET stress. (4) The fault management system provides a FLT warning output when TMR reaches 1.275 V, and turns off the MOSFET at 1.375 V. The LT4363-2 then auto-retries after a cool-down period with <1% duty cycle, minimizing MOSFET stress during persistent faults.

Pin Description: LT4363IMS-2#TRPBF Pin Definition and Functions
Pin No. Pin Name Function
1 VCC Positive supply input (4 V to 80 V)
2 UV Undervoltage comparator input (1.275 V threshold)
3 OV Overvoltage comparator input (1.275 V threshold)
4 SHDN Shutdown control (pull below 0.4 V to shutdown)
5 FLT Fault output (open collector, pulls low before shutdown)
6 TMR Fault timer capacitor connection
7 SNS Current sense input (high side of sense resistor)
8 OUT Output voltage sense (MOSFET source)
9 GATE N-channel MOSFET gate drive output
10 FB Voltage regulator feedback input (1.275 V threshold)
11 ENOUT Enable output (open collector, high-Z when MOSFET fully on)
12 GND Device ground
Application Scenarios: In which products and applications is LT4363IMS-2#TRPBF used
  • Automotive front-end protection against load dump and ISO 7637 surge transients, clamping output to safe voltage for downstream electronics
  • Hot swap controllers for server and telecom line cards where inrush current limiting and overvoltage protection are required
  • Industrial 24 V/48 V bus protection with reverse battery protection using back-to-back MOSFETs
  • Intrinsic safety barrier circuits where the auto-retry feature with <1% duty cycle meets spark energy limits
Alternative Models: What chips are recommended as replacements for LT4363IMS-2#TRPBF
Model Brand Vin Range Fault Mode Package
LT4363IMS-1#TRPBF ADI 4-80 V Latch-off MSOP-12
LT4363CDE-2#TRPBF ADI 4-80 V Auto-retry DFN-12
LTC4366ITS8#TRPBF ADI 9-500 V Latch-off TSOT-23-8
TIDA-01273 TI 4-65 V Auto-retry Reference design
MAX16141 ADI 5.5-65 V Auto-retry TSSOP-16

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1