Opens in a new tab

LPC2148FBD64

ARM7TDMI-S MCU, 512 kB flash, 40 kB SRAM, USB 2.0 FS, dual ADC, LQFP-64

4300

Effective Inventory

Image for reference only

Manufacturer Part:

LPC2148FBD64

Package:

LQFP-64 (10.0 x 10.0 x 1.4 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LPC2148FBD64 from NXP Semiconductors is a single-chip 16-bit/32-bit microcontroller based on the ARM7TDMI-S CPU with 512 kB flash memory and 40 kB SRAM. It features USB 2.0 full-speed device controller, dual 10-bit ADCs, 10-bit DAC, PWM, and multiple serial interfaces in a compact LQFP-64 package.

Key Specifications

CPU Core ARM7TDMI-S (32-bit/16-bit)
Max CPU Clock 60 MHz
Flash Memory 512 kB
SRAM 32 kB + 8 kB (USB DMA)
USB 2.0 Full-speed device
ADC 2 x 10-bit, 14 channels, 2.44 us/channel
DAC 10-bit, 1 channel
Operating Voltage 3.0 V to 3.6 V (5 V tolerant I/O)
Operating Temperature -40°C to 85°C

Features

  • ARM7TDMI-S core with 128-bit wide memory accelerator
  • 512 kB on-chip flash with ISP/IAP programming
  • USB 2.0 full-speed device controller with 2 kB endpoint RAM
  • Dual 10-bit ADCs with 14 analog inputs total
  • 10-bit DAC for analog output
  • Multiple serial interfaces: 2x UART, 2x I2C, SPI, SSP
  • Two 32-bit timers with capture and compare channels
  • 45 fast GPIO pins with 5 V tolerant I/O

Applications

  • Communication gateways and protocol converters
  • USB peripheral devices (HID, mass storage, audio)
  • Industrial control and medical systems
  • Access control and point-of-sale terminals
Product Introduction: LPC2148FBD64 Product Introduction

The LPC2148FBD64 from NXP Semiconductors is a versatile 16-bit/32-bit microcontroller built around the ARM7TDMI-S CPU core, featuring 512 kB of on-chip flash memory and 40 kB of SRAM (32 kB general purpose + 8 kB shared with USB DMA). A 128-bit wide memory interface and unique accelerator architecture enable 32-bit code execution at the maximum 60 MHz clock rate, while the 16-bit Thumb mode reduces code size by over 30% with minimal performance penalty. The device includes a USB 2.0 full-speed device controller with dedicated endpoint RAM, making it well-suited for USB peripheral applications. Dual 10-bit ADCs provide 14 analog input channels with conversion times as low as 2.44 us per channel, and a 10-bit DAC enables analog output generation. Multiple serial interfaces including two UARTs, two I2C buses, SPI, and SSP support diverse communication requirements. The 45 GPIO pins are 5 V tolerant, providing flexibility in mixed-voltage system designs.

Working Principle: LPC2148FBD64 Working Principle

The LPC2148FBD64 operates through several integrated subsystems: (1) The ARM7TDMI-S CPU core executes 32-bit ARM or 16-bit Thumb instructions, with the memory accelerator providing zero-wait-state access to flash memory at up to 60 MHz using a 128-bit prefetch buffer. The Vectored Interrupt Controller (VIC) manages interrupt priorities with programmable vector addresses. (2) The memory subsystem includes 512 kB flash with ISP/IAP capability for in-field firmware updates, 32 kB general-purpose SRAM, and 8 kB USB DMA SRAM. The boot loader supports ISP via UART for initial programming. (3) The peripheral subsystem includes dual 10-bit successive-approximation ADCs with input multiplexing, a 10-bit resistor-string DAC, six-channel PWM unit, two 32-bit timers, watchdog timer, and real-time clock with independent power domain. (4) The USB 2.0 full-speed device controller manages endpoint buffers and DMA transfers, supporting standard USB device classes. (5) The clock and power management includes an on-chip PLL for generating 60 MHz from lower-frequency crystals, and idle/power-down modes for energy conservation.

Pin Description: LPC2148FBD64 Pin Definition and Functions
Pin Group Function Count Description
P0[0]-P0[31] GPIO / Peripheral 32 Port 0: shared with UART, I2C, SPI, SSP, PWM, ADC, DAC, USB
P1[0]-P1[31] GPIO / Peripheral 13 Port 1: available GPIO pins (13 used, others reserved)
VDD (3.3 V) Power 4 Core and I/O supply (3.0 V to 3.6 V)
VSS Ground 4 Ground connections
VBAT RTC Power 1 RTC backup power supply
RESET System 1 External reset input (active low)
XTAL1/XTAL2 Clock 2 External crystal oscillator (1-25 MHz)
Application Scenarios: In which products and applications is LPC2148FBD64 used
  • USB peripheral devices (custom HID controllers, mass storage devices, audio class devices) leveraging the integrated USB 2.0 full-speed controller
  • Industrial control systems using dual ADCs for multi-channel sensor acquisition and DAC for analog control outputs
  • Communication gateways and protocol converters utilizing multiple UART, I2C, and SPI interfaces simultaneously
  • Access control and point-of-sale terminals where the compact LQFP-64 package and 5 V tolerant I/O simplify system design
Alternative Models: What chips are recommended as replacements for LPC2148FBD64
Model Brand Core Flash USB
LPC2146FBD64 NXP ARM7TDMI-S 256 kB 2.0 FS
LPC2144FBD64 NXP ARM7TDMI-S 128 kB 2.0 FS
LPC1768FBD100 NXP Cortex-M3 512 kB 2.0 FS/OTG
AT91SAM7X256 Microchip ARM7TDMI 256 kB 2.0 FS
STR711FR2T6 ST ARM7TDMI 256 kB No

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1