Opens in a new tab

AT24C512C-SSHD-T

512-Kbit I2C EEPROM, 1 MHz, 128B page, 1M cycles, 100yr retention, SOIC-8

8600

Effective Inventory

Image for reference only

Manufacturer Part:

AT24C512C-SSHD-T

Package:

SOIC-8 (3.91 x 4.90 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The AT24C512C-SSHD-T from Microchip Technology is a 512-Kbit (64K x 8) I2C-compatible serial EEPROM in an 8-pin SOIC package. It supports 1 MHz clock frequency, 128-byte page write mode, and features 1 million write cycle endurance with 100-year data retention. The device operates from 2.5 V to 5.5 V over the industrial temperature range.

Key Specifications

Memory Density 512 Kbit (64K x 8)
Interface I2C (2-wire serial)
Max Clock Frequency 1 MHz (2.5 V to 5.5 V)
Page Size 128 bytes
Write Cycle Time 5 ms max (self-timed)
Write Endurance 1,000,000 cycles
Data Retention 100 years
Supply Voltage 2.5 V to 5.5 V
Operating Temperature -40°C to 85°C

Features

  • 512 Kbit organized as 65,536 x 8 bytes
  • Standard and Fast-mode Plus I2C (1 MHz)
  • 128-byte page write with partial page write support
  • Hardware write-protect pin for full array protection
  • Schmitt trigger filtered inputs for noise suppression
  • Cascadable: up to 8 devices on a single I2C bus
  • Self-timed write cycle (5 ms max)
  • Ultra-low standby current: 6 uA max

Applications

  • Industrial and consumer nonvolatile parameter storage
  • Calibration data and configuration tables
  • System identification and serial number storage
  • Data logging in battery-powered devices
Product Introduction: AT24C512C-SSHD-T Product Introduction

The AT24C512C-SSHD-T from Microchip Technology is a 512-Kbit serial EEPROM that provides 65,536 bytes of nonvolatile storage using a standard I2C two-wire interface. The device supports Fast-mode Plus I2C at up to 1 MHz clock frequency when operating from 2.5 V to 5.5 V, enabling rapid data transfers in high-performance systems. The 128-byte page write mode allows efficient bulk programming, with partial page writes supported for flexible data storage. Schmitt trigger inputs with noise filtering ensure reliable communication in electrically noisy industrial environments. The hardware write-protect (WP) pin provides a physical mechanism to protect the entire memory array from accidental writes during system operation. With an endurance specification of 1 million write cycles and 100-year data retention, the AT24C512C-SSHD-T provides exceptional reliability for critical parameter and calibration data storage. The cascadable address scheme allows up to eight devices to share a single I2C bus, providing up to 4 Mbit total nonvolatile storage.

Working Principle: AT24C512C-SSHD-T Working Principle

The AT24C512C-SSHD-T operates through four functional subsystems: (1) The I2C interface handles all communication with the host controller via SDA and SCL lines. The device responds to the standard AT24C EEPROM address format: a 1010 device type identifier followed by three address bits (A2, A1, A0) that select one of up to eight devices on the bus, and a read/write bit. Schmitt trigger inputs with filtering suppress noise on the bus lines. (2) The address decoder receives the 16-bit memory address sent after the device address byte and selects the corresponding location in the 65,536-byte array. The two-byte address supports the full 512 Kbit density. (3) The memory array consists of 512 pages of 128 bytes each. During a page write operation, up to 128 bytes are loaded into an internal page buffer and then programmed to the nonvolatile array in a self-timed 5 ms cycle. Partial page writes are supported, and bytes within the same page can be written individually. (4) The write-protect logic monitors the WP pin. When WP is tied high, all write operations to the entire array are blocked, providing hardware-level data protection against accidental corruption.

Pin Description: AT24C512C-SSHD-T Pin Definition and Functions
Pin No. Pin Name Function
1 A0 Address input 0; sets device I2C slave address bit
2 A1 Address input 1; sets device I2C slave address bit
3 A2 Address input 2; sets device I2C slave address bit
4 GND Ground
5 SDA Serial data (bidirectional, open-drain)
6 SCL Serial clock input
7 WP Write-protect input; tie high to protect entire array
8 VCC Supply voltage (2.5 V to 5.5 V)
Application Scenarios: In which products and applications is AT24C512C-SSHD-T used
  • Industrial control systems storing calibration coefficients and configuration parameters that must survive power cycles with 100-year data retention and 1M write cycle endurance
  • Multi-sensor data logging applications where 64 KB of nonvolatile storage accommodates extensive event records and the 1 MHz I2C bus enables rapid data retrieval
  • System identification modules storing serial numbers, manufacturing data, and device certificates with hardware write-protect preventing unauthorized modification
  • Consumer electronics with cascaded I2C buses where multiple AT24C512C devices provide scalable nonvolatile storage up to 4 Mbit on a single bus
Alternative Models: What chips are recommended as replacements for AT24C512C-SSHD-T
Model Brand Density Max Freq Page Size
AT24C256C-SSHL-T Microchip 256 Kbit 1 MHz 64 B
AT24CM01-SSHL-T Microchip 1 Mbit 1 MHz 256 B
24LC512-I/SN Microchip 512 Kbit 400 kHz 128 B
BR24G512FJ-3AGE2 Rohm 512 Kbit 1 MHz 128 B
M24M01-RMN6TP ST 1 Mbit 1 MHz 256 B

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1