Opens in a new tab

MCP16311T-E/MS

30V/1A sync buck, PFM/PWM auto-mode, 95% eff, 500kHz, MSOP-8, T&R

9100

Effective Inventory

Image for reference only

Manufacturer Part:

MCP16311T-E/MS

Package:

MSOP-8 (3.0 x 3.0 x 1.10 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MCP16311T-E/MS from Microchip Technology is a 30 V, 1 A synchronous buck regulator in an 8-pin MSOP package. It features automatic PFM/PWM mode operation for high efficiency across the entire load range, peak current mode control, and internal compensation, requiring minimal external components.

Key Specifications

Input Voltage Range 4.4 V to 30 V
Output Voltage Range 2.0 V to 24 V (adjustable)
Output Current 1 A
Switching Frequency 500 kHz
Reference Voltage 0.8 V
High-Side RDS(on) 300 mOhm
Low-Side RDS(on) 170 mOhm
Efficiency Up to 95%
Operating Temperature -40°C to +125°C (TJ)

Features

  • Automatic PFM/PWM mode for high efficiency at light and heavy loads
  • Integrated high-side and low-side MOSFET switches
  • Internal soft-start: 300 us turn-on time
  • Peak current mode control with internal compensation
  • Low 3 uA shutdown current and 44 uA quiescent current in PFM mode
  • Cycle-by-cycle peak current limit protection
  • Undervoltage lockout at 3.6 V typical with 0.5 V hysteresis
  • Thermal shutdown at 150°C with 25°C hysteresis

Applications

  • Industrial and automotive distributed power systems
  • Battery-powered devices and portable instruments
  • Set-top boxes and consumer electronics
  • USB-powered and wall adapter applications
Product Introduction: MCP16311T-E/MS Product Introduction

The MCP16311T-E/MS from Microchip Technology is a compact, high-efficiency, fixed-frequency synchronous step-down DC-DC converter that operates from input voltages up to 30 V. It integrates both high-side (300 mOhm) and low-side (170 mOhm) N-channel MOSFET switches in an 8-pin MSOP package, providing up to 1 A output current with adjustable output voltage from 2.0 V to 24 V. The device employs peak current mode control with internal compensation, simplifying the design by eliminating external compensation components. A key feature is the automatic PFM/PWM mode switching: the device operates in PWM mode at heavier loads for low output ripple, and automatically transitions to PFM mode at light loads to maintain high efficiency. The quiescent current in PFM mode is only 44 uA, and the shutdown current is a mere 3 uA, making the device ideal for battery-powered applications. The internal 300 us soft-start limits inrush current, while cycle-by-cycle current limiting and thermal shutdown provide robust protection.

Working Principle: MCP16311T-E/MS Working Principle

The MCP16311T-E/MS operates through four key subsystems: (1) The control loop uses peak current mode control where the output voltage is sensed via the FB pin and compared to the 0.8 V internal reference. The error amplifier output controls the peak inductor current on a cycle-by-cycle basis. Internal compensation eliminates the need for external RC networks. (2) The power stage consists of integrated high-side and low-side N-channel MOSFETs driven by the BOOST capacitor circuit. The high-side switch connects the input to the inductor during the on-time, while the low-side switch provides a synchronous freewheeling path during the off-time, achieving up to 95% efficiency. (3) The mode controller automatically switches between PWM and PFM based on load current. In PWM mode at 500 kHz, the device maintains constant frequency operation. Below a load threshold, it enters PFM mode where switching pulses are skipped to reduce gate drive and switching losses, maintaining efficiency above 80% even at 1 mA load. (4) Protection circuits include UVLO at 3.6 V, cycle-by-cycle current limit, and thermal shutdown at 150°C.

Pin Description: MCP16311T-E/MS Pin Definition and Functions
Pin No. Pin Name Function
1 VIN Input voltage supply (4.4-30 V)
2 VCC Internal 5 V LDO output, bypass with 1 uF
3 EN Enable input (active high, internal pull-up)
4 VFB Voltage feedback input (0.8 V reference)
5 GND Power ground
6 SW Switching node (inductor connection)
7 BOOST Bootstrapped supply for high-side driver
8 GND Signal ground
Application Scenarios: In which products and applications is MCP16311T-E/MS used
  • Industrial distributed power architectures converting 12 V or 24 V bus to 3.3 V or 5 V point-of-load rails at up to 1 A
  • Battery-powered portable instruments requiring high efficiency across the full load range with PFM/PWM auto-switching
  • USB-powered devices converting 5 V bus to 3.3 V or 1.8 V logic rails with minimal external components
  • Automotive auxiliary power supplies operating from 12 V battery with cold-crank immunity down to 4.4 V input
Alternative Models: What chips are recommended as replacements for MCP16311T-E/MS
Model Brand Vin Max Iout Package
MCP16312T-E/MS Microchip 30 V 1 A MSOP-8
TPS560200DBVR TI 17 V 500 mA SOT-23-5
LMR16006YQDDCRQ1 TI 40 V 600 mA SOT-23-6
AP63200WU-7 Diodes 32 V 2 A TSOT-26
MP1584EN-LF-Z MPS 28 V 3 A SOIC-8

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1