Opens in a new tab

AP2171SG-13

Load switch, 1.2-5.5V, 40mOhm, adj current limit 0.15-2A, reverse block, SOT-23-5

9800

Effective Inventory

Image for reference only

Manufacturer Part:

AP2171SG-13

Package:

SOT-23-5 (2.90 x 1.60 x 1.10 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The AP2171SG-13 from Diodes Incorporated is a single-channel load switch with adjustable current limit in a SOT-23-5 package. It features an input voltage range of 1.2 V to 5.5 V, a low 40 mOhm on-resistance, and programmable current limiting from 0.15 A to 2.0 A for USB and hot-swap power rail protection.

Key Specifications

Input Voltage Range 1.2 V to 5.5 V
On-Resistance 40 mOhm typical
Current Limit Range 0.15 A to 2.0 A (adjustable)
Quiescent Current 1 uA typical (off state)
Reverse Current Blocking Yes
Output Discharge Integrated
Enable Input Active high
Fault Flag Output Open-drain
Operating Temperature -40°C to +85°C

Features

  • Low RDS(on) of 40 mOhm for minimal voltage drop
  • Adjustable current limit via external resistor
  • Reverse current blocking prevents backfeed
  • Integrated output discharge for rapid power-down
  • Thermal shutdown protection
  • Open-drain fault flag indicates overcurrent or thermal events
  • Controlled turn-on slew rate limits inrush current
  • Compact SOT-23-5 package

Applications

  • USB port power switching and protection
  • Hot-swap power rail management
  • Portable device power distribution
  • SSD and storage device power sequencing
Product Introduction: AP2171SG-13 Product Introduction

The AP2171SG-13 from Diodes Incorporated is a single-channel integrated load switch designed for power rail switching and protection in portable electronics and USB-powered systems. It integrates a 40 mOhm N-channel MOSFET with adjustable current limiting, reverse current blocking, and controlled turn-on slew rate in a compact SOT-23-5 package. The current limit is programmable from 0.15 A to 2.0 A via a single external resistor, allowing designers to tailor the protection level for different load requirements. Reverse current blocking prevents backfeed from the output to the input when the switch is off, protecting upstream circuitry. The integrated output discharge resistor rapidly discharges the output capacitance when the switch is turned off, ensuring a clean power-down sequence. An open-drain fault flag (FLG) signals overcurrent, short-circuit, or thermal shutdown conditions to the system controller. The controlled turn-on slew rate limits inrush current during hot-plug events, preventing voltage droops on the input supply.

Working Principle: AP2171SG-13 Working Principle

The AP2171SG-13 operates through four functional blocks: (1) The power switch is an N-channel MOSFET with 40 mOhm on-resistance, controlled by the EN (enable) input. When EN is driven high, the gate driver applies a controlled ramp to the MOSFET gate, producing a slew-rate-limited turn-on that limits inrush current into the output capacitance. When EN is driven low, the MOSFET turns off rapidly. (2) The current limit circuit monitors the MOSFET current and compares it against the threshold set by the external resistor on the ILIM pin. When the current exceeds the limit, the MOSFET gate voltage is reduced to regulate the current at the set value. If the overcurrent persists, the thermal shutdown activates. (3) The reverse current blocking circuit uses a comparator to detect when VOUT exceeds VIN, disabling the MOSFET to prevent current flow from output to input. (4) The fault flag (FLG) is an open-drain output that asserts low during overcurrent, short-circuit, or thermal shutdown events, providing real-time status to the host controller.

Pin Description: AP2171SG-13 Pin Definition and Functions
Pin No. Pin Name Function
1 VIN Input voltage (1.2-5.5 V)
2 GND Ground
3 EN Enable input (active high)
4 ILIM Current limit set resistor (to GND)
5 VOUT Output voltage (to load)
Application Scenarios: In which products and applications is AP2171SG-13 used
  • USB port power switching where the adjustable current limit protects the USB host controller from overcurrent faults and the reverse blocking prevents backfeed from peripheral devices
  • Hot-swap power rail management in server and telecom cards where controlled turn-on slew rate limits inrush current during card insertion
  • Portable device power distribution using multiple AP2171 devices to independently enable and protect individual power domains with fault reporting
  • SSD power sequencing where the integrated output discharge ensures rapid and clean power-down during hot-unplug events
Alternative Models: What chips are recommended as replacements for AP2171SG-13
Model Brand Ron Ilim Package
AP2172SG-13 Diodes 40 mOhm Fixed SOT-23-5
TPS22916DBVR TI 50 mOhm – SOT-23-5
NCP380LSN05AAT1G onsemi 50 mOhm Adj TSOT-23-6
FDC6324L onsemi Discrete – SOT-23-6
SIP32431DR3-T1-GE3 Vishay 44 mOhm – TSOT-23-5

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1