Opens in a new tab

MCP42100-I/SL

Dual 8-bit 100kOhm digital pot, SPI, 256-tap, shutdown, daisy-chain, SOIC-14

7600

Effective Inventory

Image for reference only

Manufacturer Part:

MCP42100-I/SL

Package:

SOIC-14 (8.65 x 3.90 x 1.27 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MCP42100-I/SL from Microchip Technology is a dual-channel 8-bit (256-tap) digital potentiometer with 100 kOhm end-to-end resistance and SPI interface in a 14-pin SOIC package. It features less than 1 uA static current, +/-1 LSB INL/DNL, and shutdown mode for maximum power savings.

Key Specifications

Resolution 8-bit (256 taps)
Channels 2 (dual)
Resistance 100 kOhm
Tolerance +/-30%
Interface SPI (Mode 0,0 and 1,1)
Bandwidth (-3dB) 145 MHz typical
Supply Voltage 2.7 V to 5.5 V
Static Supply Current 1 uA max
Operating Temperature -40°C to +85°C

Features

  • Dual independent potentiometer channels in one package
  • 256-position resolution with +/-1 LSB INL and DNL
  • Linear taper with potentiometer or rheostat configuration
  • Software shutdown disconnects A terminal and connects wiper to B
  • Hardware SHDN pin for shutdown control
  • Hardware reset (RS) pin returns wiper to mid-scale (80h)
  • Multiple devices can be daisy-chained via SO pin
  • Channel-to-channel resistance matching < 1%

Applications

  • Audio volume and tone control
  • Servo-motor control and battery charging
  • Programmable filters and gain adjustment
  • LCD contrast and brightness control
Product Introduction: MCP42100-I/SL Product Introduction

The MCP42100-I/SL from Microchip Technology is a dual-channel 8-bit digital potentiometer with 100 kOhm end-to-end resistance and an SPI serial interface in a 14-pin SOIC package. Each of the two independent channels provides 256 tap positions with linear taper, allowing the wiper position to be set with +/-1 LSB integral and differential nonlinearity. The device operates from a single 2.7 V to 5.5 V supply and consumes less than 1 uA in static operation, making it ideal for battery-powered applications. A software shutdown feature disconnects the A terminal from the resistor stack and simultaneously connects the wiper to the B terminal, while the hardware SHDN pin provides the same function externally. The RS (reset) pin returns both wipers to the mid-scale position (80h) on power-up or when asserted. The SPI interface includes both SI (serial input) and SO (serial output) pins, enabling daisy-chaining of multiple MCP42XXX devices for systems requiring more than two potentiometer channels. The channel-to-channel resistance matching is within 1%.

Working Principle: MCP42100-I/SL Working Principle

The MCP42100-I/SL operates through three functional blocks: (1) The SPI interface receives 16-bit command words (8-bit command + 8-bit data) through the SI pin. The command byte selects the channel and operation (write data, shutdown, or no operation), while the data byte sets the wiper position (00h to FFh). The SO pin shifts out data from the internal registers, enabling daisy-chaining of multiple devices where data is clocked through one device to the next. (2) Each potentiometer channel consists of a 255-element resistor string with CMOS switches connected to each tap point. The wiper register value selects which tap is connected to the PW terminal. The resistance between PA and the wiper varies linearly with the register value. In shutdown mode, the PA terminal is disconnected and the wiper is connected to PB. (3) The control logic decodes the command byte and routes the data byte to the selected channel’s wiper register. The hardware RS pin resets both wiper registers to 80h (mid-scale), and the SHDN pin forces both channels into shutdown simultaneously. Wiper position changes occur on the rising edge of CS.

Pin Description: MCP42100-I/SL Pin Definition and Functions
Pin No. Pin Name Function
1 PB0 Channel 0 terminal B
2 PA0 Channel 0 terminal A
3 VDD Supply voltage (2.7-5.5 V)
4 PW0 Channel 0 wiper
5 VSS Ground
6 CS Chip select (active low)
7 SCK Serial clock
8 SI Serial data input
9 SO Serial data output (daisy-chain)
10 RS Hardware reset (active low)
11 SHDN Hardware shutdown (active low)
12 PW1 Channel 1 wiper
13 PB1 Channel 1 terminal B
14 PA1 Channel 1 terminal A
Application Scenarios: In which products and applications is MCP42100-I/SL used
  • Audio equipment volume and tone control where dual channels provide left/right balance adjustment via SPI with less than 1% channel matching
  • Programmable filter and oscillator circuits where 145 MHz bandwidth and 256-tap resolution enable precise frequency and Q-factor tuning
  • Battery charger current and voltage regulation using the digital potentiometer to set feedback dividers under microcontroller control
  • LCD contrast and brightness control in embedded displays where the shutdown mode reduces power consumption when the display is off
Alternative Models: What chips are recommended as replacements for MCP42100-I/SL
Model Brand Channels Resistance Package
MCP42100T-I/SL Microchip 2 100 kOhm SOIC-14
MCP4251-104-E/SL Microchip 2 100 kOhm SOIC-14
AD5262BRUZ100 ADI 2 100 kOhm TSSOP-14
MAX5494ETE+T Maxim 2 100 kOhm TQFN-16
X9C103S8IZ Intersil 1 10 kOhm SOIC-8

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1