Opens in a new tab

FT232RL

USB-UART bridge IC, 12Mbps, 3Mbaud, 1024-bit EEPROM, integrated clock, SSOP-28

6700

Effective Inventory

Image for reference only

Manufacturer Part:

FT232RL

Package:

SSOP-28 (10.2 x 5.3 x 1.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The FT232RL from FTDI Chip is a USB to serial UART interface IC in a 28-pin SSOP package. It handles the entire USB protocol on-chip with no USB firmware programming required, supporting data rates from 300 baud to 3 Mbaud, integrated EEPROM, and multiple interface modes including UART, bit-bang, and FIFO.

Key Specifications

USB Standard USB 2.0 Full Speed (12 Mbps)
UART Data Rate 300 baud to 3 Mbaud (TTL)
TX Buffer Size 256 bytes
RX Buffer Size 128 bytes
Internal EEPROM 1024 bits (VID, PID, serial, strings)
Supply Voltage 3.3 V to 5.25 V (single supply)
CBUS I/O Pins 4 (configurable)
I/O Voltage 1.8 V to 5 V (via VCCIO)
Operating Temperature -40°C to +85°C

Features

  • Entire USB protocol handled on-chip, no firmware programming
  • Integrated 1024-bit EEPROM for device descriptors and CBUS configuration
  • Integrated USB termination resistors and clock generation
  • Configurable CBUS I/O pins (TXLED, RXLED, TXDEN, PWREN, SLEEP)
  • Synchronous and asynchronous bit-bang interface options
  • UART with 7/8 data bits, 1/2 stop bits, and full parity options
  • Integrated level converter for 1.8 V to 5 V logic interfacing
  • FTDIChip-ID unique security dongle feature
  • 48/24/12/6 MHz clock output options

Applications

  • USB to RS232/RS422/RS485 converters
  • Legacy peripheral USB upgrade
  • MCU/FPGA programming and debug interfaces
  • USB instrumentation and industrial control
Product Introduction: FT232RL Product Introduction

The FT232RL from FTDI Chip is one of the most widely-used USB to serial UART interface ICs in the embedded industry, offering a complete single-chip solution for adding USB connectivity to UART-based systems. The device handles the entire USB protocol on-chip, including enumeration, data transfer, and suspend/resume, eliminating the need for USB firmware development. It integrates a 1024-bit EEPROM for storing USB Vendor ID (VID), Product ID (PID), serial number, product description strings, and CBUS pin configuration, all programmable in-circuit over USB using the FTDI MPROG utility. The UART supports data rates from 300 baud to 3 Mbaud with 256-byte transmit and 128-byte receive buffers that use smoothing technology for high throughput. The VCCIO pin allows the UART and CBUS I/O voltages to be set independently from 1.8 V to 5 V, enabling direct interfacing with a wide range of logic families. Beyond basic UART mode, the FT232RL supports synchronous and asynchronous bit-bang modes for direct I/O control, and a CBUS bit-bang mode for simple digital I/O without UART involvement.

Working Principle: FT232RL Working Principle

The FT232RL operates through five functional blocks: (1) The USB transceiver and SIE (Serial Interface Engine) handle all USB 2.0 full-speed physical layer and protocol layer operations, including NRZI encoding/decoding, CRC generation/checking, and packet formatting. Integrated 1.5 kOhm pull-up on D+ signals full-speed capability. (2) The USB protocol processor manages device enumeration, endpoint configuration, and data transfer between the USB host and the internal buffers. It implements both CDC (Virtual COM Port) and D2XX (direct driver) data paths. (3) The UART engine converts between parallel buffer data and serial UART format with programmable baud rate, data format, and flow control (hardware RTS/CTS or software XON/XOFF). The baud rate is generated from the internal clock with fine resolution. (4) The EEPROM controller reads the 1024-bit configuration EEPROM at power-up to load device descriptors and CBUS settings. The EEPROM can be reprogrammed over USB at any time. (5) The level converter adjusts the UART and CBUS I/O voltages based on the VCCIO pin, enabling 1.8 V to 5 V logic compatibility regardless of the core VCC supply.

Pin Description: FT232RL Pin Definition and Functions
Pin No. Pin Name Function
1 TXD UART transmit data output
2 DTR# Data terminal ready (output)
3 RTS# Request to send (output)
4 VCCIO I/O voltage reference (1.8-5 V)
5 RXD UART receive data input
6-10 Mixed RI#, DCD#, DSR#, CTS#, CBUS0-4
15 USBDP USB D+ (with integrated 1.5k pull-up)
16 USBDM USB D-
17 3V3OUT 3.3 V LDO output (50 mA max)
20 VCC Core supply (4.0-5.25 V)
Application Scenarios: In which products and applications is FT232RL used
  • USB-to-RS232 converter cables and dongles where the integrated USB resistors, clock, and EEPROM eliminate all external active components for a minimal BOM design
  • MCU and FPGA programming interfaces where the 3 Mbaud UART and bit-bang modes support high-speed firmware download and JTAG-like debug communication
  • USB instrumentation and industrial control using the D2XX direct driver for low-latency, high-throughput data acquisition with 256-byte TX and 128-byte RX buffers
  • Security dongle applications leveraging the unique FTDIChip-ID burned into each device during manufacture for software copy protection
Alternative Models: What chips are recommended as replacements for FT232RL
Model Brand Max Baud EEPROM Package
FT232RQ FTDI 3 Mbaud 1024 bit QFN-32
MCP2200-I/SO Microchip 1 Mbaud 256 bytes SOIC-20
CP2102N-A02-GQFN24 Silicon Labs 2 Mbaud 576 bytes QFN-24
CH340G WCH 2 Mbaud – SOIC-16
CH9350 WCH 1 Mbaud – SSOP-20

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1