Opens in a new tab

DS1307ZN+T&R

I2C RTC, 5 V, 56B NV SRAM, auto power-fail detect, 500 nA backup, SOIC-8

7800

Effective Inventory

Image for reference only

Manufacturer Part:

DS1307ZN+T&R

Package:

SOIC-8 (4.90 x 3.91 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The DS1307ZN+T&R from Analog Devices (formerly Maxim Integrated) is a 64 x 8 serial real-time clock (RTC) with 56 bytes of battery-backed NV SRAM. It communicates via a 2-wire I2C interface, operates from a 5 V supply with a separate battery backup input, and features automatic power-fail detection and switch-over. The device is packaged in an 8-pin SOIC.

Key Specifications

Interface I2C (2-wire serial)
Supply Voltage (VCC) 4.5 V to 5.5 V
Battery Backup Voltage 2.0 V to 3.5 V
Timekeeping Current (VBAT) 500 nA typical
NV SRAM 56 bytes (battery-backed)
Clock Format BCD (24-hour or 12-hour with AM/PM)
I2C Address 0x68 (7-bit)
Operating Temperature -40°C to 85°C

Features

  • Complete real-time clock with seconds through year tracking
  • 56 bytes of battery-backed NV SRAM for data storage
  • Automatic power-fail detect and switch-over circuitry
  • 2-wire I2C serial interface for simple connection
  • Programmable square-wave output (1 Hz, 4 kHz, 8 kHz, 32 kHz)
  • 24-hour or 12-hour clock format with AM/PM indicator
  • Valid time through year 2100 with leap year compensation
  • Ultra-low 500 nA timekeeping current on battery backup

Applications

  • Embedded system timekeeping and date stamping
  • Data logging with timestamp for industrial and medical devices
  • Consumer electronics with persistent clock
  • POS terminals and billing systems
Product Introduction: DS1307ZN+T&R Product Introduction

The DS1307ZN+T&R from Analog Devices is a serial real-time clock (RTC) that provides seconds, minutes, hours, day, date, month, and year information through a simple 2-wire I2C interface. The device operates from a 5 V main supply while maintaining timekeeping from a separate backup battery when main power is lost, with automatic power-fail detection and seamless switch-over between supplies. The clock operates in either 24-hour or 12-hour format with an AM/PM indicator, and includes automatic leap year compensation valid through the year 2100. In addition to the timekeeping registers, the DS1307 provides 56 bytes of battery-backed NV SRAM that can be used to store critical system parameters that must survive power interruptions. A programmable square-wave output on the SQW/OUT pin can generate 1 Hz, 4.096 kHz, 8.192 kHz, or 32.768 kHz signals. The timekeeping current on battery backup is only 500 nA typical, ensuring years of continuous operation from a single coin cell.

Working Principle: DS1307ZN+T&R Working Principle

The DS1307ZN+T&R operates through four functional subsystems: (1) The oscillator and timekeeping block uses an external 32.768 kHz crystal connected to the X1 and X2 pins as the timebase. The internal oscillator circuit divides the crystal frequency to generate 1 Hz ticks that increment the time registers. All time and date registers are in BCD format for easy readout. (2) The power management circuit monitors VCC and VBAT voltages. When VCC falls below VBAT, the device automatically switches to battery backup, disabling all outputs and the I2C interface to minimize battery drain. When VCC returns above VBAT, the device switches back to main power and resumes normal operation. (3) The I2C interface operates as a slave device at address 0x68 (7-bit), supporting standard mode (100 kHz) communication. The master can read or write the eight time/date registers and the 56 NV SRAM bytes. (4) The square-wave output generator divides the 32.768 kHz oscillator signal to produce programmable frequency outputs on the SQW/OUT pin, which can also be controlled as a simple logic output via the control register.

Pin Description: DS1307ZN+T&R Pin Definition and Functions
Pin No. Pin Name Function
1 X1 32.768 kHz crystal input
2 X2 32.768 kHz crystal output
3 VBAT Battery backup supply (+3 V typical)
4 GND Ground
5 SDA I2C serial data (bidirectional)
6 SCL I2C serial clock input
7 SQW/OUT Square-wave output or logic output
8 VCC Main supply voltage (4.5 V to 5.5 V)
Application Scenarios: In which products and applications is DS1307ZN+T&R used
  • Embedded Linux and MCU systems requiring persistent timekeeping across power cycles with battery backup and automatic power-fail detection
  • Data logging systems in industrial and medical devices where 56 bytes of NV SRAM stores critical calibration or configuration data alongside timestamps
  • POS terminals and billing systems needing accurate date/time stamping with leap year compensation through 2100
  • Consumer electronics with always-on clock display using 500 nA backup current from a CR2032 coin cell for years of unattended operation
Alternative Models: What chips are recommended as replacements for DS1307ZN+T&R
Model Brand Interface NV RAM Backup Current
DS3231SN# ADI I2C 236 B 200 nA
MCP7940N-I/SN Microchip I2C 64 B 1.2 uA
PCF8563BS NXP I2C 0 250 nA
RV-8803-C3 Micro Crystal I2C 0 240 nA
DS1337Z+ ADI I2C 0 800 nA

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1