Opens in a new tab

TPS78233DDCR

150mA ultra-low Iq (1.3uA) LDO, 3.3V fixed output, 250mV dropout, SOT-23-5 Thin

2409

Effective Inventory

Image for reference only

Manufacturer Part:

TPS78233DDCR

Package:

SOT-23-5 Thin / TSOT-23-5 (2.9 x 1.6 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS78233DDCR from Texas Instruments is an ultra-low quiescent current, low-dropout (LDO) linear regulator providing a fixed 3.3V output at up to 150mA. With a quiescent current of just 1.3uA (typical), it is optimized for battery-powered and always-on applications. The device features a 250mV maximum dropout at full load, enable pin for power sequencing, and integrated active output pull-down for rapid discharge. It is housed in a thin SOT-23-5 package suitable for space-constrained designs.

Key Specifications

Output Voltage 3.3V (Fixed)
Output Current 150mA
Input Voltage Range 2.7V to 5.5V
Dropout Voltage 250mV max @ 150mA
Quiescent Current (Iq) 1.3uA (typical)
PSRR 40dB to 15dB (10Hz to 1kHz)
Enable Pin Active High
Protection Over-current, Over-temperature, Reverse Polarity
Operating Temperature -40 to 125°C
Package SOT-23-5 Thin (TSOT-23-5)

Features

  • Ultra-low quiescent current of 1.3uA extends battery life
  • 500nA shutdown current for near-zero power in standby
  • Active output pull-down for controlled discharge
  • Stable with no output load (zero-load capability)
  • Enable pin with CMOS-compatible logic levels
  • Over-current, over-temperature, and reverse polarity protection
  • Small SOT-23-5 thin package for compact designs

Applications

  • Battery-powered IoT and wearable devices
  • Always-on power rails in portable electronics
  • Sensor power supply and signal conditioning
  • Low-power microcontroller voltage regulation
  • Portable medical instruments
Product Introduction: TPS78233DDCR Product Introduction

The TPS78233DDCR is a member of Texas Instruments’ TPS782 family of ultra-low quiescent current LDO regulators. Designed specifically for battery-operated and always-on systems, this device delivers a fixed 3.3V output at up to 150mA while drawing only 1.3uA of quiescent current. The innovative internal circuit maintains excellent output voltage regulation even under zero-load conditions, addressing a common limitation of traditional PMOS LDOs. The integrated active pull-down rapidly discharges the output when the device is disabled, ensuring predictable power-down behavior. Housed in a thin SOT-23-5 package, the TPS78233DDCR is ideal for space-constrained portable applications.

Working Principle: TPS78233DDCR Working Principle

The TPS78233DDCR uses a PMOS pass transistor to achieve low dropout voltage regulation. The error amplifier compares a fraction of the output voltage (via an internal resistor divider set for 3.3V) with an internal bandgap reference, and adjusts the PMOS gate drive to maintain regulation. The ultra-low quiescent current is achieved through a specialized bias circuit that minimizes operating current while preserving loop stability. An innovative light-load circuit maintains loop gain at zero-load conditions, ensuring regulation without a minimum load requirement. The enable pin (EN) is active-high and compatible with standard CMOS logic. When disabled, an active pull-down circuit discharges the output capacitor to within 5% of VOUT. The device includes built-in over-current, over-temperature, and reverse polarity protection circuits.

Pin Description: TPS78233DDCR Pin Definition and Functions
Pin Name Type Function
1 IN Power Input voltage supply (2.7V to 5.5V)
2 GND Ground Ground reference
3 EN Input Enable (active high); connect to IN if not used
4 NC – No internal connection
5 OUT Output Regulated 3.3V output
Application Scenarios: In which products and applications is TPS78233DDCR used
  • Always-on power rails in battery-powered IoT sensors and wearables
  • Low-dropout regulation for single-cell Li-Ion to 3.3V systems
  • Portable medical devices requiring ultra-low standby power consumption
  • Microcontroller and sensor power supply in wireless metering applications
  • Post-regulation stage after switching converters in noise-sensitive circuits
Alternative Models: What chips are recommended as replacements for TPS78233DDCR
Manufacturer Part Number Package Notes
TI TPS78228DDCR SOT-23-5 2.8V fixed output variant
TI TPS79933DDCR SOT-23-5 3.3V, 200mA, low noise
Microchip MCP1824T-3302E/OT SOT-23-5 3.3V, 300mA LDO
Richtek RT9013-33GB SOT-23-5 3.3V, 300mA LDO
Diodes Inc AP2112K-3.3 SOT-23-5 3.3V, 600mA LDO

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1