Product Overview
The SN74HC595DR from Texas Instruments is an 8-bit serial-in/parallel-out shift register with output latches and 3-state outputs. It is one of the most widely used logic ICs for expanding output capabilities of microcontrollers. Using only 3 GPIO pins (data, clock, latch), it can control 8 output lines, and multiple devices can be daisy-chained for virtually unlimited expansion. The device operates from 2V to 6V and is housed in a 16-pin SOIC package for surface-mount applications.
Key Specifications
| Bits | 8-bit shift register + 8-bit storage register |
| Supply Voltage | 2V to 6V |
| Output Type | 3-state (high, low, high-impedance) |
| Output Drive | +/-6mA at 5V |
| Max Clock Frequency | 24MHz at 5V |
| Propagation Delay | 13ns typical at 5V |
| Supply Current | 80uA max (ICC) |
| Input Current | 1uA max |
| Operating Temperature | -40 to 85°C |
| Package | SOIC-16 (D) |
Features
- 8-bit serial-in, parallel-out shift register with output storage register
- Separate clocks for shift and storage registers
- Direct overriding clear (SRCLR) input
- Serial output (QH’) for daisy-chaining multiple devices
- Low power consumption: 80uA max ICC
- Wide operating voltage range: 2V to 6V
- LED display and matrix driving
- Microcontroller I/O expansion
- 7-segment display multiplexing
- Relay and solenoid driver control
- Digital logic delay and storage circuits
- LED matrix and 7-segment display driving with multiplexed control
- Microcontroller I/O expansion for relay, solenoid, and actuator control
- Daisy-chained shift register networks for large-scale digital output systems
- Shift-and-store data buffering in digital communication interfaces
- Hobbyist and educational projects for GPIO expansion on Arduino/Raspberry Pi
Applications
Product Introduction: SN74HC595DR Product Introduction
The SN74HC595DR from Texas Instruments is a classic 8-bit shift register with output storage register and 3-state outputs, belonging to the 74HC logic family. It is one of the most popular logic ICs in embedded design, used to expand the number of digital outputs available from a microcontroller. Using just three control signals (SER, SRCLK, RCLK), a single device provides 8 output lines, and multiple devices can be cascaded through the serial output (QH’) pin for unlimited expansion. The separate shift and storage registers allow new data to be shifted in while the current output remains stable, preventing flicker in display applications. The SOIC-16 surface-mount package is suitable for automated PCB assembly.
Working Principle: SN74HC595DR Working Principle
The SN74HC595DR contains two 8-bit registers operating in tandem. The shift register accepts serial data on the SER input, clocked in on each rising edge of SRCLK. After 8 bits have been shifted in, the RCLK (register clock) rising edge transfers the shift register contents to the storage register, which directly drives the 8 parallel outputs (QA-QH). The SRCLR (shift register clear) input resets the shift register independently of the storage register. The OE (output enable) input, when high, places all outputs in a high-impedance state, while internal register data and the QH’ serial output remain unaffected. The QH’ output provides the 9th and subsequent shift register bits for daisy-chaining additional 595 devices. This dual-register architecture ensures glitch-free output transitions since outputs only update when RCLK is pulsed.
Pin Description: SN74HC595DR Pin Definition and Functions
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | QB | Output | Storage register output B |
| 2 | QC | Output | Storage register output C |
| 3 | QD | Output | Storage register output D |
| 4 | QE | Output | Storage register output E |
| 5 | QF | Output | Storage register output F |
| 6 | QG | Output | Storage register output G |
| 7 | QH | Output | Storage register output H |
| 8 | GND | Ground | Ground |
| 9 | QH’ | Output | Serial output for cascading |
| 10 | SRCLR | Input | Shift register clear (active low) |
| 11 | SRCLK | Input | Shift register clock |
| 12 | RCLK | Input | Storage register clock (latch) |
| 13 | OE | Input | Output enable (active low) |
| 14 | SER | Input | Serial data input |
| 15 | QA | Output | Storage register output A |
| 16 | VCC | Power | Supply voltage (2-6V) |
Application Scenarios: In which products and applications is SN74HC595DR used
Alternative Models: What chips are recommended as replacements for SN74HC595DR
| Manufacturer | Part Number | Package | Notes |
|---|---|---|---|
| TI | SN74HC595N | DIP-16 | Through-hole version |
| TI | SN74HCS595DR | SOIC-16 | Schmitt trigger inputs version |
| NXP | 74HC595D | SOIC-16 | Pin compatible equivalent |
| Microchip | 74HC595 | SOIC-16 | Generic HC595 equivalent |
| ST | M74HC595M1R | SOIC-16 | Pin compatible, same function |
Recommend Parts

IRFS4310ZTRLPBF
IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)
Brand: infineon
Package: D2PAK (TO-263AB)
IN STOCK: 11137pcs
Cargo cycle: 3-7 Days
The minimum order is 1

MSASJ105BB5475MFNA01
4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden
Brand: gigadevice
Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)
IN STOCK: 9701pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IRF3415PBF
150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package
Brand: infineon
Package: TO-220AB
IN STOCK: 2940pcs
Cargo cycle: 3-7 Days
The minimum order is 1

105017-1001
USB Type-C receptacle connector, 24-pin, SMD
Brand: Amphenol
Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)
IN STOCK: 5335pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IRLB3034PBF
IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB
Brand: infineon
Package: TO-220AB
IN STOCK: 9724pcs
Cargo cycle: 3-7 Days
The minimum order is 1

XC6SLX75-2FGG484I
Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx
Brand: xilinx
Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)
IN STOCK: 890pcs
Cargo cycle: 3-7 Days
The minimum order is 1






