Opens in a new tab

DS1302SN+T&R

Real-time clock with 31×8 RAM, 3-wire serial, trickle charge, SOIC-8

14135

Effective Inventory

Image for reference only

Manufacturer Part:

DS1302SN+T&R

Package:

SOIC-8 (SN) (4.9 x 3.9 x 1.58 mm, 300mil)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The DS1302SN+T&R from Maxim Integrated (now Analog Devices) is a real-time clock (RTC) IC with a 31 x 8 battery-backed static RAM. It uses a simple 3-wire serial interface (CE, I/O, SCLK) for communication with a host microcontroller. The device keeps track of seconds, minutes, hours, day, date, month, and year with automatic leap-year compensation valid up to 2100. It operates from 2V to 5.5V and supports trickle charging for backup battery management, packaged in an 8-pin SOIC.

Key Specifications

Supply Voltage (VCC1) 2.0V to 5.5V
Backup Voltage (VCC2) 2.0V to 5.5V
Time Accuracy +/-2 minutes/month at 25°C
Interface 3-wire serial (CE, I/O, SCLK)
RAM 31 x 8 bits battery-backed
Max Serial Clock Rate 2MHz at 5V
Operating Current 300nA typical (timekeeping, VCC2)
Operating Temperature -40 to 85°C
Package SOIC-8 (300mil)
Packaging Tape & Reel

Features

  • Full BCD-coded clock/calendar: seconds through year
  • Automatic leap-year compensation valid up to 2100
  • 31 x 8 battery-backed general-purpose RAM
  • 3-wire serial interface for minimal pin count
  • Dual power pins (VCC1 main, VCC2 backup) with automatic switchover
  • Programmable trickle charger for backup battery
  • Ultra-low timekeeping current: 300nA typical
  • Single-byte and burst-mode data transfer

Applications

  • Embedded system real-time clock
  • Time-stamping in data logging systems
  • Industrial process control timing
  • Utility meters and billing systems
  • Point-of-sale terminal time keeping
Product Introduction: DS1302SN+T&R Product Introduction

The DS1302SN+T&R is a real-time clock IC from Maxim Integrated (now Analog Devices) that provides time and date tracking with 31 bytes of battery-backed static RAM. The device uses a simple 3-wire serial interface that requires only three GPIO pins from the host microcontroller, making it ideal for pin-constrained designs. The dual-power supply architecture with automatic switchover ensures uninterrupted timekeeping when the main power fails, while the built-in trickle charger can maintain a rechargeable backup battery. The BCD-coded time registers cover seconds through year with automatic month-end and leap-year correction, simplifying firmware development.

Working Principle: DS1302SN+T&R Working Principle

The DS1302 operates as a slave device on a 3-wire serial bus. Communication is initiated by the host pulling CE (chip enable) high, then shifting in a command byte (8 bits) followed by data bytes on the I/O line, synchronized by SCLK. The command byte specifies the read/write direction and the target register address. The clock/calendar registers store time in BCD format, with the oscillator running continuously from either VCC1 or VCC2. An internal power-sense circuit automatically switches to the backup supply (VCC2) when VCC1 drops below VCC2, ensuring uninterrupted operation. The 31 bytes of RAM share the same serial interface and are also battery-backed. The programmable trickle charger connects VCC2 to the backup battery through selectable diode and resistor configurations, controlled via the trickle charger register.

Pin Description: DS1302SN+T&R Pin Definition and Functions
Pin Name Type Function
1 VCC2 Power Backup supply input (battery)
2 X1 Input 32.768kHz crystal input
3 X2 Output 32.768kHz crystal output
4 GND Ground Ground
5 CE Input Chip enable (active high)
6 I/O I/O Serial data input/output
7 SCLK Input Serial clock input
8 VCC1 Power Main supply (2.0-5.5V)
Application Scenarios: In which products and applications is DS1302SN+T&R used
  • Real-time clock for embedded systems requiring persistent time tracking
  • Data logging systems needing accurate timestamps for recorded events
  • Industrial process controllers with scheduled operation and alarm functions
  • Utility meters (electric, gas, water) requiring time-of-use billing
  • Security and access control systems with time-stamped event logging
Alternative Models: What chips are recommended as replacements for DS1302SN+T&R
Manufacturer Part Number Package Notes
Maxim/ADI DS1302ZN SOIC-8 Narrow body SOIC-8 variant
Maxim/ADI DS3231SN# SOIC-16 TCXO RTC, +/-2ppm accuracy, I2C
ST M41T62LC6 DFPN-12 Ultra-small, I2C, +/-5ppm
Microchip MCP7940N-I/SN SOIC-8 I2C, 64 bytes SRAM, event detect
NXP PCF8563BS TSSOP-8 I2C, low power, 240nA

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1