Opens in a new tab

LM60440AQRPKRQ1

Automotive 4A 36V sync buck, AEC-Q100 G1, WQFN-13 wettable flanks

2100

Effective Inventory

Image for reference only

Manufacturer Part:

LM60440AQRPKRQ1

Package:

WQFN-13 / RPK (3.0 x 2.0 x 0.9 mm, wettable flanks, exposed pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM60440AQRPKRQ1 from Texas Instruments is an AEC-Q100 Grade 1 qualified, 3.8V to 36V, 4A synchronous step-down converter in a WQFN-13 (RPK) package with wettable flanks. It features peak current-mode control, 400kHz switching frequency, and 25uA quiescent current for automotive power applications.

Key Specifications

Input Voltage Range 3.8V to 36V
Output Voltage Range 1V to 24V (adjustable)
Output Current 4A maximum
Switching Frequency 400kHz
Quiescent Current 25uA typical
Efficiency >95% peak
PFM Efficiency 90% at 10mA, 12V to 5V
AEC-Q100 Grade Grade 1 (-40 to 125 C TA)
Junction Temperature -40 to 150 C
Package WQFN-13 (RPK, 3x2mm) with wettable flanks

Features

  • AEC-Q100 Grade 1 qualified
  • 3.8V to 36V wide input range
  • 4A output current
  • Ultra-small WQFN-13 (3x2mm) with wettable flanks
  • Peak current-mode control
  • 25uA ultra-low quiescent current
  • +/-1.5% total output accuracy
  • 400kHz switching frequency
  • Auto PFM at light load
  • Power good output
  • Frequency foldback at light load
  • Functional safety documentation available

Applications

  • Automotive infotainment power
  • ADAS camera power
  • Automotive body electronics and lighting
  • USB charging in automotive
  • Industrial 12V/24V step-down
Product Introduction: LM60440AQRPKRQ1 Product Introduction

The LM60440AQRPKRQ1 from TI is an AEC-Q100 Grade 1 automotive 4A synchronous buck converter with 3.8-36V input in ultra-small WQFN-13 (3x2mm) with wettable flanks for automated optical inspection. Peak current-mode control with 25uA quiescent current and 400kHz switching. +/-1.5% output accuracy with auto PFM for >90% light-load efficiency. Functional safety documentation available.

Working Principle: LM60440AQRPKRQ1 Working Principle

Uses peak current-mode control where the inductor peak current is controlled on a cycle-by-cycle basis. The error amplifier sets the current reference, and the high-side MOSFET turns off when the sensed current reaches this threshold. At light loads, the device automatically folds back the switching frequency and enters PFM (pulse-frequency modulation) mode to maintain efficiency down to 10mA. The WQFN package with wettable flanks enables automated optical inspection (AOI) of solder joints in automotive manufacturing.

Pin Description: LM60440AQRPKRQ1 Pin Definition and Functions
Pin Name Type Function
1 BOOT Power Bootstrap capacitor for high-side driver
2 VIN Power Input supply (3.8-36V)
3 EN Input Enable control
4 FB Input Feedback voltage (1V reference)
5 VCC Output Internal LDO output (bypass cap)
6 AGND Ground Analog ground
7 PG Output Power good indicator
8 PGND Ground Power ground
9-11 SW Output Switch node (inductor)
12-13 PGND Ground Power ground
Application Scenarios: In which products and applications is LM60440AQRPKRQ1 used
  • 12V automotive battery to 5V/3.3V ECU power
  • ADAS camera module 3.3V POL from 12V
  • 24V truck battery to 5V step-down
  • Automotive USB charging port 5V supply
  • Industrial 24V bus to logic rail conversion
Alternative Models: What chips are recommended as replacements for LM60440AQRPKRQ1
Manufacturer Part Number Package Notes
TI LM60430AQRPKRQ1 WQFN-13 3A version, pin compatible
TI LM60440GRPKRQ1 WQFN-13 Standard QFN (no wettable flanks)
TI TPS62130AQRGTTQ1 VQFN-16 3A, 17V, similar automotive

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1