Opens in a new tab

LM258P

Dual 700kHz op amp, 3-32V, ground-sensing, PDIP-8, LM358 family

640

Effective Inventory

Image for reference only

Manufacturer Part:

LM258P

Package:

PDIP-8 / P-8 (9.81 x 6.35 mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM258P from Texas Instruments is a dual general-purpose operational amplifier in a PDIP-8 through-hole package. Featuring a wide 3V to 32V supply range, 700kHz gain bandwidth, and input common-mode range that includes ground, it is the industry-standard dual op-amp for single-supply applications.

Key Specifications

Number of Channels 2
Gain Bandwidth Product 700 kHz (1.1 MHz for B/BA versions)
Slew Rate 300 mV/us (0.3 V/us)
Supply Voltage Range 3V to 32V (single) / +/-1.5V to +/-16V (dual)
Input Offset Voltage 5 mV max
Input Bias Current 150 nA typical
Quiescent Current 350 uA typical (both channels)
Output Current 20 mA typical
CMRR 80 dB
Input Common-Mode Range 0V to VCC-1.5V (includes ground)
Operating Temperature -25 to 85 C
Package PDIP-8 (P suffix)

Features

  • Industry-standard dual op-amp
  • Single supply operation: 3V to 32V
  • Input common-mode range includes ground
  • Internal frequency compensation
  • Large DC voltage gain: 100dB
  • Wide bandwidth: 1.1MHz (B/BA versions)
  • Low supply current: 500uA max
  • Short-circuit protected outputs

Applications

  • Transducer amplifier circuits
  • DC gain blocks
  • Active filters
  • General-purpose signal conditioning
  • Single-supply analog circuits
Product Introduction: LM258P Product Introduction

The LM258P from TI is a dual general-purpose op amp in PDIP-8. The LM258 is the industrial-grade member of the LM358 family, rated for -25 to 85C operation. Features 3-32V single supply, 700kHz GBW, and input common-mode range that includes ground for true single-supply operation. Internal frequency compensation eliminates external components. P suffix denotes PDIP-8 through-hole package.

Working Principle: LM258P Working Principle

The LM258 uses a bipolar input stage with PNP input transistors, allowing the input common-mode range to extend to ground (0V) in single-supply operation. The internal frequency compensation capacitor provides unity-gain stability without external components. The output stage uses a class-AB push-pull configuration with active current limiting. The output can swing to within approximately 1.5V of the positive rail (VCC-1.5V) due to the VCE(sat) of the internal current source. The 300mV/us slew rate and 700kHz bandwidth are limited by the internal compensation capacitor value.

Pin Description: LM258P Pin Definition and Functions
Pin Name Type Function
1 OUT A Output Amplifier A output
2 IN- A Input Amplifier A inverting input
3 IN+ A Input Amplifier A non-inverting input
4 GND Power Ground (negative supply)
5 IN+ B Input Amplifier B non-inverting input
6 IN- B Input Amplifier B inverting input
7 OUT B Output Amplifier B output
8 VCC Power Positive supply (3-32V)
Application Scenarios: In which products and applications is LM258P used
  • Single-supply 5V sensor amplifier with ground-referenced input
  • DC gain block for industrial control loops
  • Active low-pass filter for signal conditioning
  • Window comparator for battery monitoring
  • General-purpose audio preamplifier
Alternative Models: What chips are recommended as replacements for LM258P
Manufacturer Part Number Package Notes
TI LM358P PDIP-8 Commercial grade (0-70C), lower cost
TI LM258BPSR SOIC-8 Enhanced B version, 1.1MHz, SOIC
ST LM258PT SOIC-8 ST second source, SOIC package

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1